http://www.hafox.com/Article/com/web/200407/5.html
First of all, this article is sent to many friends thanked all netizens! ! ! After reading the reply information of everyone, summarize everyone's questions, for your reference! If there is still a problem, please follow it here, I will take time to reply! (Please don't add my QQ again, thank you !!!) Question 1: Before landing information settings, you should change your PC's IP to 192.168.1.xxx (such as: 192.168.1.5), IP is generally 192.168 .1.1; Username / Password: admin / admin (or admin / epicrouter). Question 2: After the landing, the setting interface is a software version. I have written only one of the tutorials. If everyone's version (setting interface) is different, please first come to "Huawei MT800" in "Huawei product series" Huawei MT800 Full Series Manual Download (to be opened with Acrobat 5.0 or later), then refer to this tutorial settings. Question 3: Does ADSL support routing / automatic dialing function first look at the corresponding version of the instructions, if there is, then there is, if not mentioned, it is likely to not support. Special explanation: I don't recommend that there is no routing function to upgrade, after all, it is too dangerous. If you refresh fail, you can only wait for your ISP (network service provider) to help you change ADSL. (To think about how long you can go online) Question 4: ADSL cat dropped Huawei ADSL did exist offline problems (at the time, it was a friend, I haven't checked it yet, may be heat dissipation and chip problem) At least I help friends do the route after the ADSL exists (first use each morning). The method of solving is the first time ADSL to turn off it and then re-power will not drop. Problem 5: About VPI / VCI Values Each city ISP has its own VPI / VCI value, usually 0/35 or 8/35, if you don't do it, then you can only go online to check your city VPI / VCI Value, or call your ISP. Question 6: Network connection issues If you want multiple PCs to access the Internet through the switch, please use the direct line to connect ADSL to the switch; ADSL standard, the original line of the ADSL is only used for ADSL and PC direct connection.
