Here are the introduction of the CCIE test team, I translated it, so that everyone will take the exam.
1: Every topic has a detailed score, which will tell you. For example, 5 points, 3 points, etc.
2: Due to a lot of exam questions, you can complete the requirements according to your own order, but it is recommended that you complete the topic based on the order of the exam, because the design of these exam questions is very particular. For example, your VLAN is not divided into the following topics, and so on.
3: The IP address is already taking advantage of the IP address for you, such as the IP address on several ports of a router, the examiner will configure it for you, you just need to check if it is correct.
4: The test will give you three topologies, one is the topology of the test equipment, one is a topology of Frame-Relay, and one is the topology of the routing protocol (excluding BGP).
5: The topic will clearly tell you what configurations do you need to do on which router or switch. But some topics still implicit requests, need you to judge yourself, but this is not much.
6: You will score only if you meet the requirements of the title. Of course, there is more than one solution, you can use any way to solve the problem, but you must meet all the requirements given by the topic, the test machine score.
7: The topic will clearly tell you which methods cannot use to complete the topic. For example, it is clear that you can't use static routes to solve the problem. If you use it, you can't score.
8: Note, this is just the exam, you don't have to take into account the actual situation in the exam, that is, you don't use the idea in the actual project to speculate on the topic, because this is just an exam for your network knowledge and routing knowledge. The exam and actual project will certainly be different.
9: Time, if you don't understand the problem or doubt the test hardware device, you can contact the examinee immediately. Of course, hardware devices generally do not have problems. The equipment for the exam is checked in advance, very stable and has been properly connected, and there is no need to worry. As for the question, you can't understand the examiner, you don't expect to get answers from the exam.
10: The information that can be found is the Document CD that the exam environment has been provided.
11: The test is to connect to the router with a PC's super terminal. If the super terminal exits, you need to connect it yourself, this exam will not help you. (This is the case, I have a problem twice when I examine it, I solved it.)
12: This is also very important, pre-configured, you don't need to change because there is no need. At the beginning, the initial configuration to you is correct. If you have any questions, you can contact the examiner.
