Automatic backup and restore using GHOST

xiaoxiao2021-03-06  112

I used to spend the use of floppy dishes as a restoring disk, but now how many people use floopy, before I bought a DVD-RW, it is Pioneer's 16 × 16, but also D9 will send 10 D5 ( A "Don't advertise"). Ok, the speech is spread, so it is still good to use Pioneer (the next piece is fainted). No, still use the disc to start the recovery disc of the CD-ROM? Use config.sys and autoexec.bat as before.

Config.sys

Device = himem.sysdevice = oakcdrom.sys / d: mscd001lastdrive = z

Autoexec.bat

!! ECHO WARNING This will destroy all of data on the first partation in your first HD ECHO Press any key to continue or Ctrl C to StopPAUSEMSCDEX.EXE / D: MSCD001 / L: Zghost -clone, mode = pload, src = z : /system.gho: 1, DST = 1: 1-2

Then use the DVD-ROM (boot) in Nero, remember to put GHOST and your backup file.

If you are a CD-ROM's burner, there is no problem only when you are backup.

Ghost -clone, Mode = PDUMP, SRC = 1: 1, DST = D: /SYSTEM.GHO -Z9 -SPLIT = 690 -Autoname This GHOST back up the first partition with 690MB of a capacity unit to System.gho In the file in SYSTEM.001, SYSTEM.002 .... If you don't have to say it next.

转载请注明原文地址:https://www.9cbs.com/read-102804.html

New Post(0)