SMS development

xiaoxiao2021-03-06 108

First, general command

AT CGMI gives the logo of the module manufacturer. AT CGMM gets the module identity. This command is used to get supported bands (GSM900, DCS1800, or PCS1900). When the module has a multi-band, the response may be a combination of different frequency bands. AT CGMR Gets the upgrade software version. AT CGSN gets the IMEI (International Mobile Device Identification) serial number of the GSM module. AT CSCS Select the TE feature setting. This command reports which state settings are set to the ME. ME then converts each input or displayed letter. This is used to send, read or write SMS. AT WPCS Set the phone book status. This special command reports the ME of the state used by the TE phone book. ME then can convert each input or displayed string letter. This is used to read or write the entrance to the phone book. AT CIMI gets IMSI. This command is used to read or identify the IMSI (International Mobile Signer ID) of the SIM card. You should enter the PIN before reading the IMSI, if PIN is required). AT CCID gets the logo of the SIM card. This command enables the module to read the EF-CCID file on the SIM card. AT GCAP gains a capabilities. (Supported features) A / Repeat last command. Only A / command cannot be repeated. This command repeats the previous execution command. AT CPOF shutdown. This special command stops the GSM software stack and hardware layer. The function of the command at cfun = 0 is the same as CPOF. AT CFUN sets the phone. This command selects the function level of the mobile site. AT CPAS returns the active status of the mobile device. AT CMEE reports an error in the mobile device. This command decides to allow or not allow the results " cmeerror: " or " cmSerror: " to replace the simple "Error". AT CKPD keypad control. Simulation ME keypad executes command. AT CCLK clock management. This command is used to set or get the current date and time of the ME real clock. AT CALA alert management. This command is used to set the alert date / time in the ME. (Alarm) AT CRMP ringtone melody play. This command plays a melody on the buzzer of the module. There are two kinds of melody available: arrival voice, data or fax call melody and the SMS sound. AT CRSL is set or obtained the sound level of the coming tone ringtone.

Second, call control command

ATD dial command. This command is used to set a call, data or fax call. ATH hang up command. ATA answers. AT CEER extension error report. This command gives the reason for interrupting the call after the last call setting fails. AT VTD provides users with the application GSM network to send DTMF (dual-speed multi-frequency) dual audio. This command is used to define the length of the dual audio (the default is 300 milliseconds). AT VTS provides users with application GSM networks to send DTMF dual audio. This command allows transfer of dual audio. ATDL redials the last phone number. AT% DN data terminal Ready (DTR) automatically dials. ATS0 automatic response. AT CICB calls to the electricity. AT CSNS Single Number Plan. AT VGR AT VGT gain control. This command is applied to the adjustment gain of the speaker and the transmission gain of the microphone. AT CMUT microphone mute control. AT Speaker Tracter / Microphone Selection. This special command is used to select a speaker and a microphone. AT ECHO echo cancels. AT SIDET side sound correction. AT VIP initializes sound parameters. At DUI dials with additional user information. AT Hui hangs up with additional user information. AT RUI receives additional user information. Third, network service command

AT CSQ signal quality. AT COPS service provider selection. AT CREG network registration. Get the registration status of your phone. AT WOPN reads the operator name. AT CPOL priority operator list.

Fourth, safety orders

AT CPIN Enter the PIN. AT CPIN2 Enter PIN2. The remaining attempt number of the AT CPINC PIN. AT CLCK device lock. AT CPWD changes the password.

V. Phone book command

AT CPBS Select phone book memory storage. AT CPBR reads the phone book table. AT CPBF looks for the phone book table. AT CPBW write phone book table. AT CPBP phone book phone query. AT CPBN phone book mobile action. This special command makes the items in the phone book or post-moving (in alphabetical order) AT CNUM signer number. AT WAIP prevents all phone books when the next restart is restarted. AT WDCP Deletes the call phone number. AT CSVM Sets the voicemail number.

Six, short message command

AT CSMS Select Message Service. Supported services include GSM-MO, SMS-MT, SMS-CB. AT CNMA new information confirmation response. AT CPMS priority information storage. This command defines the storage area used to read and write information. AT CMGF priority information format. The format has a text method and a PDU mode. AT CSAS Save Setup. Save CSAs and CSMP parameters. AT CRES Restore Setup. AT CSDH Displays the parameters of the text mode. AT CNMI new information indication. This command selects how to receive short messages from the network. AT CMGR Read SMS. Information is read from the memory set from the CPMS command. AT cmgl lists the stored information. AT CMGS sends information. AT CMGW Write short information and stores. AT CMSS sends information from the memory. AT CSMP Sets the parameters of the text mode. AT CMGD deletes short information. Delete one or more short information. AT CSCA SMS Service Center Address. The AT CSCB selection unit broadcast information type. AT WCBM unit broadcast information identifier. AT WMSC information status (whether to read, whether to send, etc.) AT WMGO information coverage. At WUSS does not change the SMS state. Still unread after performing cmgr or cmgl. Seven, add service orders

AT CCFC Call Continue. AT CLCK Call is prohibited. AT CPWD changes the additional service password. AT CCWA call waiting. AT CLIR Call cable confirmation limit. AT Clip call line confirmation statement. AT COLP ring contact confirmation statement. AT CAOC cost report. AT CACM Cumulative Call Measurement. AT CAMM Cumulative Call Measurement Maximum. AT CPUC unit price and currency table. AT CHLD call related additional services. The AT CLCC lists the current call. AT CSSN Additional Service Notice. AT CUSD has no organization. AT CCUG close-up user group.

Eight, data command

AT CBST Identification Type Selection. AT FCLASS selection mode. This command sets the module to a special mode of data or fax operation. AT CR Service Report Control. This command allows more detailed service reports. AT CRC divided results code. This command allows more detailed ringtone instructions when calling. AT ILRR Local DTE-DCE Rate Report. AT CRLP radio communication line protocol parameters. AT DOPT Other radio communication line parameters. AT% C data compression selection. Whether the AT DS allows V42 to compress. AT DR does not report V42 dimensions compression. AT / N data error correction selection.

Nine, fax command

AT FTM transmission rate. AT FRM Receive Rate At FTH Sets the fax transfer rate with the HDLC protocol. AT FRH Sets the fax receiving rate with the HDLC protocol. AT FTS stops transmitting and waiting for a specific period

Implement and read the mobile folder, upload the function of downloading the file! Siemens, Ericsson's mobile phone support Obex needs to communicate with this special way and mobile phone. The Bluetooth protocol also has this protocol. Specific reference

http://www.irda.org

9cbs

New Post(0)