Eight, recorder
Common faults 1: Cannot start the computer after installing the burner
First cut off the power supply power supply, open the chassis housing to check if the IDE line is fully inserted, and to ensure that the PIN-1's pin location is properly connected. If the burner is shared with other IDE devices, you need to ensure that the two devices cannot be set to "MA" or "SL" mode, you can set it to "mA", one setting " SL ".
Common faults 2: Use simulation burning success, actually burning
The difference in the "Simulated Burning" and "Burning" commands provided by the burner is whether the laser beam is played, while other operations are identical, that is, "simulation burning" can test whether the source disc is normal, whether the hard disk speed is enough Fast, if the remaining disk space is sufficient, the status of the burning environment, but does not test whether there is a problem with the discs, the laser read writing power of the recorder is matched, and the like is matched. In view of this, the "simulation burning" is explained, and the real burning failed, indicating that the compatibility between the recorder and the blank disc is not very good, and the following two methods can be used to re-test:
1. Reduce the write speed of the recorder, suggest 2X or less;
2. Please replace another brand blank disc for burning operation.
Another reason for this phenomenon is caused by laser read writing power attenuation. If you use the same brand of discs, it is normal within a previous period of time, it is likely to be related to the read-write head power attenuation. Manufacturer maintenance.
Common fault three: unable to copy the game CD
Some large commercial software or game software, in the production process, protect the disc of the disc, so in the process of discharging the disc copy, there will be unable to copy, resulting in an error in the burning process, or not normal use after copying The situation occurred.
Common fault four: burning CD music can't play normally
Not all audio equipment can read the CD-R disc, most CDs do not properly read the contents of the CD-RW disk, so it is best not to use a recorder to burn CD music. In addition, it is necessary to note that the burning CD music must comply with the CD-DA file format.
Common faults 5: Burning software burning the disc process, sometimes "bufferunderrun" error prompt information
"Bufferunderrun" error message means the buffer owes. Generally in the burn process, the data to be brought-to-the data needs to be transmitted to the host by the hard disk through the IDE interface, and then transferred to the buffermore in the recorder via the IDE interface, and finally the recorder is burned in the data information stored in the bufferMemory to CD- R or CD-RW trays, these actions must be continuous, absolutely uninterrupted, if any of the links have problems, will cause the burner that cannot be written normally, and there is an error prompt of the buffer underload. It is a disc. The solution is to close some of the resident memory programs, such as turning off the disc auto-insertion announcement, turning off the anti-virus software, Window Task Management, and Schedule Task and Screen Salary.
Common fault six: During the disc burning process, it often has a burning failure.
Increasing burning successivity requires maintaining the system environment. That is to close the background resident program, it is best to prepare a dedicated hard disk for the burning system, specifically install and burn relevant software. During the burning process, it is best to save the data first in the hard disk, making it "ISO Mirror File", and then engraved into the disc. In order to ensure the smoothness of the data transfer, you need to finish the hard disk fragmentation, avoiding the failure interrupt error caused by the file that cannot be transmitted normally, can perform hard disk finishing by executing "Disk Scanner" and "Disk Defragmetal" . In addition, do not run other programs during the burning process, even the mouse and keyboard don't touch it easily. Burning the computer is best not to be with other computer, during the burning process, if the system administrator sends information to this machine, it will affect the burning effect, in addition, in the LAN, do not use resource sharing, if in the burning process, other The user reads the local hard drive, which will cause burning works or fail. In addition, pay attention to the heat dissipation problem of the burner, good heat dissipation conditions will give a stable working environment for the recorder. If the burner is too high because of continuous burning, the computer can be turned off first, and then turn off the computer, and then continue after the temperature is reduced. Burn. It is best to add additional heat dissipation fans to the chassis for built-in burners. The external burner should pay attention to dust-proof and moisture, so as not to cause the laser head reading and writing is not normal. Common fault seven: Use easycdpro burning unrecognizable Chinese directory name
When using easycdpro burning the Chinese file name, you can choose Romeo in the file name option, you can support the 128-bit file name, which is the file name of 64 Chinese characters. In addition, WinonCD, Nero, DirectCD2.x, etc., can support long Chinese file names, and EasyCdcreator is slightly troublesome in this regard.
