Second, memory
Memory is one of the most important accessories in your computer, and its role is undoubted, what are the most common faults of memory?
Common faults 1: boot no display
This fault occurs because the memory strip is generally due to the poor memory of the memory module, and as long as it uses the eraser to erase the gold finger site to solve the problem (do not use alcohol and other cleaning), and the memory is damaged or There is a problem with the main board memory slot, which will also cause such faults. Because the memory necklace is caused, the host speaker is generally burst for a long time (for the Award BIOS).
Common faults 2: Windows registration forms are often damaged for no reason, prompting users to recover
Such faults are generally due to poor memory strips, it is difficult to repair, only replacement.
Common faults: Windows often automatically enters safe mode
Such faults are generally due to the fact that the main board and memory strip are incompatible or the memory strip quality is poorly caused, and the high frequency memory is commonly used on the motherboard that does not support this frequency memory, can attempt to reduce memory reading within the CMOS settings. If you can solve the problem, if you can't do it, you only have the replacement memory.
Common fault four: randomized crash
Such faults are generally due to several of the memory strips of different chips, due to the different time differences in each memory, causing a crash, which can reduce the memory speed in the CMOS settings, otherwise, only using the same model memory . Another possibility is that the memory strip is not compatible with the motherboard, and such phenomena is generally rare, and it may be that the memory strip and the motherboard contact is poorly causing the computer randomly crash.
Common fault five: memory is increased after system resources
Such a phenomenon is generally due to the main board and memory is not compatible. Common in the high frequency memory memory module is used on the motherboard that does not support this frequency, you can try to be in the COMS after such a fault. The speed setting of memory is lower.
Common Target Six: Tips that often have insufficient memory when running certain software
This phenomenon is generally due to the lack of residual space of the system, and some useless files can be deleted, and some space can be left, it is generally maintained at around 300M.
Common fault seven: When the hard disk boots to install Windows to detect disk space, the system prompts insufficient memory.
Such faults are generally because users add EMM386.exe files in the config.sys file, as long as they are blocked.
