There is a variety of English short sentences after the problem occurs, and the short sentence contains very important information. Read these information can solve some small problems yourself, but these English is difficult to fill a friend, below Some common BIOS short sentences explain, you can refer to it.
1.cmos battery failed
Chinese: CMOS battery failure.
Explanation: This shows that the CMOS battery has not been powered, as long as the new battery can be replaced.
2.cmos check sum error-defaults loading
Chinese: CMOS is found when all checks are performed, and the system preset value is loaded.
Explanation: Generally speaking, this sentence is that the battery is fast, you can try it to try it, if the problem is still not solved, then the CMOS RAM may have problems, if it is not a year, go to the dealer to change A motherboard, after a year, let the dealer return to the manufacturer to repair it!
3.Press Esc to Skip Memory Test
Chinese: Memory check is on, can be skipped by ESC button.
Explanation: This is because there is no second, third, four tests that are not set in the CMOS. Four memory tests will be executed. Of course, you can also end the memory check by the ESC key, but every time you have this. Too much trouble, you can enter the COMS setting After selecting BIOS Featurs Setup, set the Quick Power On Self Test to Enabled, and restart after storage.
4.Keyboard Error or No Keyboard Present
Chinese: Keyboard error or missed keyboard.
Explanation: Check if the connection of the keyboard is loose or damaged.
5.hard Disk Install Failure
Chinese: Hard disk installation failed.
Explanation: This is because the hard disk's power cord or data line may not be connected or improperly set. You can check if the various connectors of the hard disk are plugged, see if the settings of the two hard drives on the same data line are the same, if the same, as long as the two hard drives are set differently. (A set as Master, another set to slave).
6. Secondary Slave Hard Fail
Chinese: Detection from disk failure
Explanation: It may be that the CMOS setting is not properly set, for example, there is no slave but set to a slave disk in CMOS, then an error will appear, then you can enter the COMS settings to select the IDE HDD Auto Detection for hard disk automatic detection. It may also be the power cord of the hard disk, the data line may not be connected or the hard disk jumper is not set properly, and the solution will be used to refer to Article 5.
7.Floppy Disk (s) Fail or Floppy Disk (s) Fail (80) or FLOPPY Disk (s) Fail (40)
Chinese: Unable to drive the floppy drive.
Explanation: The system prompts can't find the floppy drive, see if the power cord and the data line of the floppy drive or get the wrong, or put the soft drive to another machine, if these can't, then I have to buy it. One, I am not expensive in the floppy drive.
8.hard Disk (s) Diagnosis Fail
Chinese: An error occurred while performing a hard disk diagnosis.
Explanation: This problem is generally said that the hard disk itself has failed. You can put the hard disk to another machine. If the problem is still not solved, I can only try it.
9.Memory Test Fail
Chinese: Memory detection failed.
Explanation: Revers and out of the memory module to see if it can be solved, this problem is generally because the memory strips are not compatible with each other, go to one! 10.Override enable-defaults loading
Chinese: Current CMOS setting Unable to start the system, load the preset value in the BIOS to start the system.
Explanation: Generally, the settings in the COMS have an error, as long as you enter the COMS settings Select Load Setup default to load the original set value and then restart.
11.Press Tab to show Post Screen
Chinese: Press the Tab key to switch the screen display.
Explanation: Some OEM vendors replace the BIOS preset boot display in their own design, we can switch between the BIOS preset boot screen with the manufacturer's custom screen by the Tab key.
12.Resuming from disk, Press Tab to show Post Screen
Chinese: Restore from the hard disk, press TAB to display the boot self-test screen).
Explanation: This is because the BIOS of the motherboard provides the feature of Suspend to Disk. If we shut down in the way in Suspend to Disk, then we will display this prompt message when booting.
13.HAREWARE MONITOR FOUND An Error, Enter Power Management Setup for Details, Press F1 To Continue, Del To Enter Setup
Chinese: Monitoring Function Discovery Error, enter the Power Management Setup View Details, press the F1 button to continue the power-on program, press the DEL key to enter the COMS setting.
Explanation: Some motherboards have hardware monitoring functions, which can set the temperature monitoring of the motherboard and the CPU, the voltage output level of the voltage regulator and the monitoring of the rotational speed of each fan, and the above-described monitoring function is discovered when it is turned on. Then there will be the above words. At this time, you can enter the COMS settings to select Power Management Setup, ** Fan Monitor ** on the right, ** Thermal monitor ** and ** Voltage Monitor ** see which part will have an exception Then add again.
