Several questions often encountered during Sybase and Oracle installations
Li Shouliang SLLI@founder.com.cn
Last Version 2003-04-01
table of Contents
First, Sybase12.5 for NT version is installed in Win2000 platform, interface Chinese characters have garbled issues
Second, Sybase still can't install problems after sharing or copying to this machine hard drive
Third, the problem that cannot be started after installing Sybase
Fourth, Syabse creates a device when the device is dead, WIN and UNIX have existed
V. Oracle8.1.x version installed on the P4 machine can not run the problem
content
First, Sybase12.5 for NT version is installed in Win2000 platform, interface Chinese characters have garbled issues
The problem is solved, the method is as follows:
Description: This version is installed in the NT4 platform, installs the Chinese garbled in the Win2000 platform.
Step1: Copy the disc installer to the hard drive;
Step2: Modify ./shared_1.0/jre1.2.2/lib/font.properties.zh.nt4.0 is
./shared_1.0/jre1.2.2/lib/font.properties.zh.nt5.0
Because Win2000 kernel is actually NT5
Second, Sybase still cannot be installed after the network sharing or copying to this machine hard disk:
Check if there is Chinese in the installed parent directory, there is a Chinese, have problems, suggestions:
Step1: Copy the installer to the local;
Step2: Install under the folder where the parent directory does not have a Chinese character;
Third, the problem that cannot be started after installing Sybase
Only one of the reasons, check if DB2 is installed on your machine. If DB2, Sybase and DB2 are installed, the DB2 uses zh_cn, Sybase uses ZH, if you want to use Sybase, I have to use Sybase. Changed to ZH, this problem is limited to 11.9.2
Fourth, Syabse creates a device when the device is dead, WIN and UNIX have existed
Check if your Master device is not too small, recreate Master, and the device is more than 150M.
V. Oracle8.1.x version installed on the P4 machine can not run the problem
Because our laboratory has no P4, huh, I haven't met here. The appearance in Xinhuanet. Last time I went to Xinhua News Agency to build an E5 Demo environment and encountered this problem. Running an Oracle installer, just like Fengteng does not detect the dongle, the mouse becomes a funnel and restores the arrow, CPU and MEM.
Note: This problem is limited to Oracle8.1x on P4, Oracle 9i is normal. The following is the solution to the online excerpt
Oracle 8i installation on P4
[www.googln.com 2002-8-26 16:14:08]
method one:
1. Copy Oracle software to the hard drive.
2, put the hard disk directory file /stage/components/oracle.swd.jre/1.1.7.30/1
/Datafiles/expanded/jre/win32/bin/symcjit.dll file is renamed as symcjit.old
3. Install the setup.exe file from the / install / win32 directory.
The premise is that there is no Oracle product on the machine. If you have any words, please uninstall, then delete the Oracle item in the registry.
Method 2 (This method is successfully installed, but more troublesome, the core of the method is plus -Nojit)
.. Copy Only The Install Directory from The CD To The Hard Disk, Say, E: / TEMP.
b. Open ORAPARAM.INI and Make The Following Modifications (Assuming CDDrive IS f :)
* Change the "Source =" Line to Use the full path to the cd instead of a
Relative path. (I.e., Source = f: /stage/products.jar)
* Change the "jre_location" line to use the full path to the cd instead of a
Relative path. (i.e.,
JRE_LOCATION = f: /stage/components/racle/swd/jre/1.1.7/1/datafiles/expanded)
* Change the "OUI_LOCATION" line to use the full path to the cd instead of a
Relative path. (i.e.,
OUI_LOCATION = f: /stage/components/racle/swd/oui/1.6.0.9.0/1/datafiles/expanded
* Change the "jre_memory_options" line to add "-nojit" as the first argument.
(i.e., jre_memory_options = -nojit -ms16m -mx32m)
^^^^^^
* Other Entries SHOULD Remain The Same
c. Launch setup.exe from the temporary location on your hard driving (i.e.
E: /TEMP/INSTALL/WIN32/Setup.exe). this will use the model
OrtaParam.ini and Pick Up The Information from the CD Since The Absolute
Locations Are Specified.
Choose a custom install and choose not to create a database during the
Install. THIS WAY, The Database Configuration Assistant Will Not Be Launched
DURING Installation.
The Net8 Configuration Assistant Will Still Be Launched, and There Is No Way
To support it. You will need to kill the net8 configuration assistant if IT
HANGS Due to the bug. The Installation Still Will Have Been Successful, And
You can run the dbca and netca after install.
To Kill Netca if it hangs during installation:
In The "Configuration Tools" WINDOW, Highlight The "Net8 Configuration
Assistant "And Click" Stop ". If That Does Not Work, Look for the Most Recent
JRE Process Using The Task Manager, And Kill It Manually. Note: The Ouiitself Will Also Have a Jre Process. Be Sure To Kill The One With the Most
Recent Date, Which Should Be The Jre Process Being Used for Net8ca, Not The
ONE for Oui Itself.
After Killing The Configuration Tools and Continuing THROUGH Tools And Continuing
To the "End of Installation" Screen, You Should Modify The Configuration Tools
To use "-nojit", The Call the appropriate Tools from the start menu.
ONCE Installation IS Complete, Each of The Following Files in The Oracle_HOME
Needs to be modified:
Assistants / DBCA / DBASSIST.CL
Assistants / DBMA / DBMIG.CL
Assistants / IFA / IFA.CL
BIN / ELOGIN.CL
BIN / OWM.CL
LDAP / OIDAMDIN / OIDADMIN.CL
Network / Tools / Netasst.cl
Network / Tools / Netca.cl
OWM / Install / INSTELOGIN.CL
OWM / Install / InstownM.CL
Edit The Contents of The Above Files To Add "-nojit" as shown Below:
Command = ("C: / Program Files / Oracle / JRE / 1.1.7 / bin / jrew" -nojit -classpath ....
this is the only thing you need to add -> ^^^^^^^
Method 3:
Upgrade the JRE of the Oracle belt.
Li Shouliang
2003-04-01
