RH9 Configure ADSL Internet

zhaozj2021-02-16  108

Note: The PPPoE comes with RH9 cannot be used, and you have to re-install it yourself. Uninstall the system to bring it! !

# ADSL-SETUP

Welcome to the Roaring Penguin Adsl Client Setup. First, I WILL Runsome Checks On Your System To Make Sure The PPPOE Client Is InstalledProproperly ... Looks Good! Now, please Enter Some Information: user name

>>> Enter Your PPPoe User Name (Default XXX): XXXX

Interface

>>> Enter The Ethernet Interface Connected To The Adsl Modemfor Solaris, this is Likey to Be Something Like /Dev/hme0.for Linux, It Will Be Ethn, Where 'N' Is A Number. (Default Eth0):

Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in secondsafter which the link should be dropped. If you want the link tostay up permanently, enter ' NO '(Two Letters, Lower-Case.) NOTE: DEMAND-ACTIVATED LINKS Do Not Interact Well with Dynamic ipaddresses. You May Have Some Problems With demand-activated links.

>>> Enter The demand value (Default NO): Bus directly

DNSPlease enter the IP address of your ISP's primary DNS server.If your ISP claims that 'the server will provide DNS addresses', enter 'server' (all lower-case) here.If you just press enter, I will assume you know what YOUS ANDOING AND NOT MODIFY YOUR DNS Setup.

>>> Enter The DNS Information Here: Write the DNS in your location

Password

>>> please enter your pppoe password: xxxxxx

>>> please re-enter your pppoe password: xxxxxx

. FIREWALLINGPlease choose the firewall rules to use Note that these rules arevery basic You are strongly encouraged to use a more sophisticatedfirewall setup;. However, these will provide basic security If youare running any servers on your machine, you must choose 'NONE' andset. . up firewalling yourself Otherwise, the firewall rules will denyaccess to all standard servers like Web, e-mail, ftp, etc. If youare using SSH, the rules will block outgoing SSH connections whichallocate a privileged source port.The firewall choices are: 0 - NONE:. This script will not set any firewall rules You are responsiblefor ensuring the security of your machine You are STRONGLYrecommended to use some kind of firewall rules.1 - STANDALONE:. Appropriate for a basic stand-alone web-surfing workstation2 - MASQUERADE : Appropriate for a Machine Acting as an Internet GatewayFor A Lan >>> Choose A Type Of FireWall (0-2) Setting the firewall level according to your own application

** Summary of what you entered ** Ethernet interface: eth0user name: xxxx Activate-on-demand: xxxxx: do not adjutfirewalling: xxxxxxxxxxxx

>>> Accept There Settings and Adjust Configuration FILES (Y / N)? Y

# ADSL-START

转载请注明原文地址:https://www.9cbs.com/read-10672.html

New Post(0)