I saw that everyone was very interested in the GHOST multicast call plate, but the previous netizen did not provide the address of the download, I now give you a download point, and attach a little description, this version is supported by the network card. : 3C90X, DCN530TX, DFE530TX, DLE530TX, IP100, PRO100, RTL8029, RTL8139, SIS, Via Don't have to worry about finding your own network card driver. As long as the GO batch processing in the file package is running. The server's configuration session name can enter your current machine name, the image file is your backup file, then click to accept the client. The next step is the settings in the customer. The client's configuration first opens Wattcp.cfg file IP = 192.168.0.53 You specify your current client's IP address Netmask = 255.255.255.0 Subnet mask for this network Gateway = 192.168.0.51 Your Ghost server IP address is just me The configuration of the Internet cafes, please modify your current settings yourself. Then run Go.bat and then open and enter GHOST's main interface. Select GHOSTCAST to select Multicast to enter the name of the session you just fill in the server, then OK. Next, just like a local copy. I don't have much to say. Once the client is OK, you can see a computer to enter your Ghost server, select it, and click Send. Let's download, I am borrowing my tube.
Oriental Battle Network
Space to everyone with download service.
Download now
The following is a speech that I turned another netizen (Alaxue), he introduced it a little difference with me, but the overall is the same, so everyone can see it: Network is really good to use it. If you can get a lot of more than 50 machines in 2 hours, you can do more, but I didn't try me. I was afraid that I was finished for a night, 300 machines, one person can be OK, it is, it is enough to reduce the restore. Elf and change IP is a bit of a bit of trouble, and I have to contact me, I have a software. I'm really good. I really hope that I hope to give a network management friend to easily point network clone instructions: First, put a client to install a client After the system and all applications and games, use GHOST.EXE to make a full video, example: Win98.gho 2, pay attention to 2 points when making a total image: 1. When making a full image, you cannot save the image file in this plate. On, I have to remember that there is one of the hard drives to store the image file; 2. Due to the general 40G hard drive, after the system and the game have been installed, most of the space has been used, and the full image of the production will reach 14-17G. Around, and during the production process, the image file reaches 2-4G (Time too tight, no research is 2G sometimes 4G) will pop up a prompt window, and there is OK, cancel, file name three buttons, choose OK. GHOST automatically generates a successful file, the file name suffix is the GLS; select "File Name", Ghost will let you enter the subsequent file name and store location. (The mean of successive files is like making WinRAR slum, *. R01 this file. Oh, I don't know how to express, everyone understands.) Third, use 40G hard drive 36g data production The image has an example, generated four 4G or so image files, the file name is: Win98.Gho, Win98.GLS, Win982.GLS, Win983.GLS (Note: Too busy that day, only remember the suffix file seems to be The suffix name of the GLS, and it is a GSL. Anyway, please see it when you make it. Otherwise I will misunderstate.) Fourth, run the Ghostcast network clone server file ghostsrv.exe, as shown below: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: Note: 1. As long as the "Image File" is selected, it will be selected for the file for GHO, and the subsequent file does not use. 2. To select a "hard disk" when the entire network clone is to be subjected to a partition network clone (such as: just a network clone C disk) to select "Partition", then click the drop-down menu on the right, and select the partition you want to clon. 3. If the condition is entered in the automatic start mode, click the "Accept the Client Connection" button, it is actually not possible (such as: 60), but actually only 55 sets of access) You can start the network clone by clicking the "Send" button. 4. If you do not enter the condition in the automatic start mode, click the "Accept Client Connection" button to confirm that all client connections are successful, click the "Send" button to start the network clone. 5. When the server side clicks on the "Accept the Client Connection" button, you can go to the client to run the client.
6. Preparations on the client: GHOSTCAST network clone client settings (with the original client has been installed, 8139 network card, no soft drive as an example): 1, first Copy Ghostcast network clone client file: NETGHOST.BAT / / Load NIC driver and run ghost.exe batch 8139.com // 8139 network card driver for dos wattcp.cfg // ghostcast network clone client configuration file ghost.exe // Do not explain it to the client, and use Notepad or DOS The following edit modifies Wattcp.cfg, the content is as follows: IP = 192.168.0.108 // Client IP, press actual modification netmask = 255.255.255.0 // Subnet mask GATEWAY = 192.168.0.101 // ghostcast network clone server IP, Press actual modification 2, restart the computer, press F8 when starting, and select the 6 item to enter pure DOS. Seven, start the client's access: Run netghost.bat, appear on the GHOST program interface, select the ghostcast - multicast item on the menu, as shown below: Press OK, if the access is successful, you can see the interface like a single-machine clone. This article is written on the stand-alone in the home. It can't figure it out to everyone. Anyway, if it is a full clone, after the access is successful, OK, OK, Yes are selected. This way, the client will enter the waiting receiving state. After all the clients are successful and entered the reception state, if the server is automatically started, the condition is automatically sent, and if the automatic start condition is not set, we will go back to the server machine, click The "Send" button starts the network clone. We can sit down, drink tea, smoke, and wait for the network clone to complete. Give some data, 8G hard disk 7.2g data, made of total video files for 3.5g 25 sets: C433 128M 5400 turn HD 8139 10-100M adaptive network card server side: P3 800 256m 7200 turn HD 3com 10-100M Adaptive Net XP System 1 Pair 25 Simultaneous Network Cloning 25 minutes 18 seconds 40g Hard Disk 36G Data, made of full image files are more than 16G more clients: CII800 128M 5400 turn HD 8139 10- 100M adaptive network card server: 1 hour 26 points to 1 hour 26 points:
All procedures and descriptions are as follows: 1. File mirroring: Will make a lichened machine with ghost8.0, this file is stored on a separate disk in the NTFS format, and takes high compression ratio, and name * .Gho, specific * What is named by yourself. (Test, high compression ratio of about 30% -40%) It is recommended to use a hard disk of 7200 rpm or more, which will increase much. 2. Server Preparation: It is recommended to use the 2000 Server system, the CPU is P41.6 or more, the memory is DDR256M, and the network card is 3COM100 level. Will be stored on the server on the server, run the ghostsrv, click Select * .Gho, the session name is customized, and set to MP, this is completed, the other does not require any settings. Then accept the client. 3. Client preparation: First, see what your client system is now, 2000, XP trouble points. Here are only 98 examples, 2000, XP I will later. Ghost.exe, RTSPKT.com (DOS driver of 8139 network card, friends who use other network cards yourself), Wattcp.cfg is copied on the client. A. Open Wattcp.cfg with Notepad, Edit: IP = 192.168.0.12 (This is this machine IP, no repetition) NetMask = 255.255.255.0 (subnet mask) Gateway = 192.168.0.198 (NETGHOST server IP or gateway It doesn't matter, then save it. This process can be implemented by its own BAT file. (I have made a simple, you can save the following B process) b. Edit the autoeexec.bat under the root directory of the C drive: @echo off (this is not explained) RTSPKT 0x60 -m 100FULL (load the network card driver and mandate the network card Duo, most friends at 55 speeds are here!!!) Ghost I didn't load DOS mouse driver, I think there is no need, the mouse under DOS is too difficult to use. Then save it. C. Repeat the machine, press F8, select 5, the machine automatically loads the NIC driver and runs GHOST. D. If your NIC driver will correct the ghostcast - multicast item otherwise gray. Fill in the NETGHOST server on your own name MP. Press Enter, the following process and hard disk are the same, there is no need to say more here. 4. When you finish all machines that need GHOST, you will connect the number of clients to the server to the server, just like the number of machines you prepare. That time is sent. So everything is OK, you will wait for your own Ghost. Below is the reason for some friends reflects slower: 1. When loading the NIC driver, write -m auto, which means that the network card is automatically selected, and the speed is about 55, it is strongly recommended to change it. -M 100full, forced NIC full duplex, you will find a speed at least 4 times more. 2. The whole process will cause the overall speed to reduce the overall speed as long as there is a problem with a computer's hard disk or network card. 3. The server's network card and formulation must have a better point, but it is not necessary to use P42.8G, I tried it, no visible improvement. 4. The crossover of the switch does not exceed 2 layers, too much, the data forwarding speed is significantly reduced, it is recommended to place the server on the first floor. 5. The switch is 100m, do not use 10m, otherwise the speed is up to 100.
