Problems about printing printed using Quick Report in Delphi

zhaozj2021-02-16  101

1. Use a needle printer to print, and the paper is resolved,

When designing: Quick Report Choosing Cusomter Paper,

When printing, select the printer paper size as the actual paper, if not, custom paper

Unit conversion: 1 inch = 25.4mm

Delphi 4.0 Win98 is doing a custom paper when doing a statement, everything is fine on the EPSON MJ-1500K inkjet printer, and can't play in the EPSON LQ-1800K needle. If the printhead is moving, many people reflect. This problem, is this problem? (Deng Jiangnan) Support: After we received the issue of Mr. Deng, he solved this problem. We feel that this problem may help many people, and he will publish his own solution as follows: Now the popular inkjet printer (such as the EPSON series) management program is better than the needle printer, when using inkjet printers, as long as the size of custom paper is properly set in the QuickReport of Delphi 4, it can be properly printed. No need to reset custom paper in the Windows printer settings! And if you use a needle printer, you must set the size of custom paper in QuickReport and Windows, it is best to set the same length and width to ensure that most needle printers are compatible! LFJOHN Opinions: Change the size of the custom paper of the printer in the system control panel, until the point is determined, then try it, I will solve it! !

转载请注明原文地址:https://www.9cbs.com/read-11158.html

New Post(0)