script> Editor Press: Newly Install Windows XP (with the latest patch SP2) and the most basic application, at least 2 hours. Then, a GHO file can make the computer quickly and completely install a new system, this is the clone we have to say today. Usually we say GHOST clones, just for the system's system backup, if the Mirror file after cloning the Windows XP system is directly used, it cannot be used properly on other computers. So how do we solve this problem?
Author: Ho Chun Source: Computer News fresh installation of Windows XP (with latest patch SP2) and basic application software, at least to take about two hours. Then, a GHO file can make the computer quickly and completely install a new system, this is the clone we have to say today. Usually we say GHOST clones, just for the system's system backup, if the Mirror file after cloning the Windows XP system is directly used, it cannot be used properly on other computers. So how do we solve this problem? We can install Windows XP and application software for a computer (female). Then use the tool to encapsulate the mother, and manually remove the hardware driver on the master. Then use GHOST to install the C discaprarch file, and finally use this GHO image file to install Windows XP directly on other computers. First, you can download a Microsoft's official website to download toolkits for packaging of Windows XP SP2. 1. Optimization of cloning system In order to make the GHO image file after the bus system, we must first optimize the system's system. 1. Move the page file to another partition. Right click on "My Computer" and select "Settings" → "Advanced" under Properties → Advanced → Performance. The default page file is located in the system partition (generally C disk). Move it to other partitions. 2. Turn off the sleep function under "Power Management". Right-click on the blank space, select "Properties → Screen Sproducts → Power → Sleep", and cancel the hook before "Enable Sleep". 3. Delete the standby dynamic link library file. Enter CMD under "Run" to open the Command Prompt window, enter the following command: SFC / PurgeCache II, uninstall hardware information This purpose is to clon a set of image files that do not have the master hardware information. When such a GHO file is used to restore other computers, the system can automatically retrieve the hardware configuration information of the corresponding computer. 1. Uninstall the network adapter, universal serial bus controller, sound card, video game controller, monitor, graphics card. After uninstalling some hardware devices, the computer will request a reboot. At this time, be sure to select "No", do not let the computer restart. Only after cloning with GHOST can let the system restart, otherwise, everything we do will scrap. 2. Change the "ACPI UNIPROCESSOR PC" attribute of "Computer" is "Standard PC". Click "Device Manager → Computer → ACPI Uniprocessor PC". Manually change the driver, select "Standard PC" from the list. The computer cannot be restarted after the changes. 3. "Intel (R) 82801BA Bus Master IDE Controller" under the IDE Controller "is changed to" Standard Dual Channel PCI IDE Controller ".
Third, run the installation manager
Double-click "Setupmgr.exe" in the toolkit, click Next, here, where the steps are more, and the steps should be made, see Table 1.
After the operation is completed, the installation manager automatically creates a directory named Sysprep in the system partition (default to C disk).
Double-click sysprep.exe in the toolkit, select "Restart" under "Using the Minimum Installation" under "Options" (see Figure). After setting up these two, click "Repack" and the computer will restart. Tip: 1. About "Factory" and "Review" must not click on it, because as long as you click on it, the computer will take effect according to the settings under "shutdown mode", and regret it too.
2. When the computer restarts, you must not let it start from the hard drive. Please modify the BIOS settings in time to start the computer from the floppy disk or disc to DOS.
Fourth, generate image files and installation
Use GHOST under DOS to make the contents of the master C disk into the GHO image file. Since the file is relatively large, consider saving the image file on the hard disk or produces a DVD disc. Once you have finished the image file, let the mother start from the hard drive. During the startup process, it will automatically find the hardware driver of this machine.
Install your GHO file to your hard drive, your computer automatically installs all hardware drivers, up to 20 minutes, this computer can be used normally.