Q: My JBX does not support Chinese on the programming interface, what should I do? A: It is recommended to use the following methods:
1. Find the C: Documents and SettingsAdministrator.primetimexuser_zh.properties file. 2. Back up user_zh.properties file (such as User_zh.properties.old) 3. Find editor.display; fixed_fonts.2, change it to editor.display; fixed_fonts.2 = u5bu4f53 (Unicode of the Song) 4. Startup JBX can be selected in Tools | Preferences | Editor | Display. Note: 1. You can also add other fonts, add editor.display; fixed_fonts.3 ..., add it, but pay attention to the Chinese Unicode if it is Chinese. 2. Chinese fonts (such as the Song) may be aligned in some places, in Tools | Preferences | Editor | Color, all bold (such as reserved word) is canceled. Method 2: Modify JB_HomeinJBuild.config. Increase the VMParam -dPrimetime.Editor.UsevariableWidthfont = true Re-Delete the initial configuration file of JB, start JB. Method 3: Delete C: / Documents and Settings / Administrator / .primetimex small file, then restart JBuilderx, the Chinese characters can be displayed normally. Q: My JBX does not support Chinese on the menu interface, what should I do? A: It is recommended to use the following methods: Start JBX in Tools | Preferences | Browser | Look & Font, select USE DIFFERENT FONT and select a Chinese font, such as SIMSUN - Song. Three .q: My JBX does not support Chinese on the design modeling interface, what should I do? A: It is recommended to use the following method: Start JBX, in Project | Project Properties | Model, and select a Chinese font, such as SIMSUN - Song. Note: You can choose a Chinese font in Project | Default Project Properties | Model, such as SIMSUN - Song, which will now set this option automatically. IV .Q: Currently JBuilderx, Enterprise Studio 7 for Java cannot be installed in Windows Server 2003, what solution is there? A: It is recommended to use the following methods for different products: JBuilderx: Insert JBuilderx DISC1 (or expand the ZIP package). If the CD will automatically pop up the installer. Do not install, use the file manager to find WindowSent_Install.exe, mouse right-click property, select the "Run this program in a compatible mode", select Windows XP (or Windows 2000) in the drop-down list. Then install it according to normal steps. For Studio 7: 1. Insert Studio 7 Disc1 (or unstart the installation zip package), if the CD will automatically pop up the installer.
Do not install, find WindowsStudio_install.exe, right key "properties", select "Compatibility", "Run this program with compatibility mode", select Windows XP (or Windows 2000) in the drop-down list. determine. Then install it according to normal steps. 2. Insert the second disk (install TJB), insert the second disk. But do not press the confirm key. First open the file manager, find WindowsInstall.exe on the second disk, modify the file properties, then press the confirm key to continue the installation. 3. Tips After inserting the third disk (install Optimizeit), insert the third disk. But do not press the confirm key. Open the file manager first, find Win32Setup.exe on the third disk, modify the file properties together, and press the confirm key to continue the installation. Note: Because Borland's Java full range of installation disks made by Zero G's Install Anywhere, many products have problems under Windows 2003, including: JBuilderx, TJB7, Studio 7, Optimizeit Suite 6, Servertrace 2, JDATASTORE 7, BES 5.2.1. Solution to modify the installation file to run the compatibility property. BES 6.0 has no problem since the new Install Anywhere 5.5 is used. V. Q: I have installed JBuilderx, but the installation path is not C: JBuilderx. Therefore, the problem that TOGETHER For JBuilderX 7 is installed. What solution is there? A: It is recommended to use the following methods: 1. First determine the path to the installed JBuilderx. For example: D: jbuilderx2. Insert Studio 7 DISC2 (or separate TJB7 ZIP package, the trial version of the customer may get such a package) 3. If it is a Windows 2003 operating system, you should first modify the file attribute 4 in accordance with the above instructions. Open a command line window (CMD), turn the directory into the Windows directory of the TJB installation disk or the installation package in the command line 5. Execute the command install -duser_install_dir = "". For example, JBuilderx's installation path is d: jbuilderx, then execute: install -duser_install_dir = "d: jbuilderx" 6. Installer Auto Installation Complete Note: This problem is that JBuilderx is installed separate JBuilderx CD, not Enterprise Studio 7 for JBuilderx - Disk1 CD in Java. If it is the latter, there is no need to set it. It automatically looks for the Directory installed by JBuilderx to complete the installation. Six. Q: When new project is created, the default diagram will put it under the unified path DIAGRAMS.
