1. Download Helix.Server, (that is, REAL server) open source version, RM media stream server, no restrictions. Support RTSP protocol, support RM, MP3, etc., even commercial, can also be copened. You can Download here. 2. Install the decompression: #tar -zxvf helix_dna_server_10.1.tar.gz The current path Get the directory HELIX_DNA_SERVER_10.1 #CD helix_DNA_SERVER_10.1 There are two files, the execution installation command is as follows: #. / Servinst_plus_linux-2.2-libc6-i586-server .bin The following is the installation process detailed: Directory: [Here you will give a default installation path, the current directory]: You can enter the specified installation path here. Or use the default path for the carriage return; UserName []: Enter the administrator login name Password: administrator password, enter the Enter again; after some of the port [system default port] (such as Port [7070], Port [554] ), You can use the default port all along the way. But you need to pay attention to: Port [80], you'd better change it to 8080 or other unused port numbers, because Apache's default port is 80, otherwise it will conflict with your Apache port. Port [80] has a port [29902], which is like Port [29902], which is your administrator login server port number, must remember, after you are used later. Next, give a list of parameters set above: .... Back to the previous Prompts: [F]: Enter f to confirm the above parameter settings, start installing immediately; enter P to reset. The installation is complete. 3. Start the server into the bin folder #CD bin launch server #. / Hlxserverplus ../hlxserverplus.cfg is your server profile. The HLXServerPlus.cfg is your server profile. If there is no incorrect, you can enter the following operations. By the way, 1 "If you want to load Helix Server when you start Linux. Start menu -> Preference ---> More Preferences ---> Session ---> Starter -> Add ---> Start command, right on the right side ---> OK Forgot to add parameters. Example: / HOME / ROOT / HELIXSERVER / BIN / HLXSERVERPLUSERVER / BIN / HLXSERVERPLUS /HOME/Root/HelixServer/hlxserverplus.cfg / home / root / helixserver is my Helix_server installation path 2 "Add a shortcut to the desktop. Right-click on the desktop ---> New launcher ---> Name: HelixServer command point browsing specified. Don't forget to add parameters. Example: / HOME / ROOT / HELIXSERVER / BIN / HLXSERVERPLUS /HOME/Root/HelixServer/hlxserverplus.cfg / home / root / helixserver is the installation path of my Helix_server. Server Management Configuration Start Mozilla In the Address Bar Enter: Your Server IP: The administrator you want to log in to the port number /Admin/index.html will pop up the dialog box. Please enter the administrator set when you installed login name and password. If it is correct, enter the server configuration interface.
