[Reserved] Solaris9 installation process under VMware

zhaozj2021-02-16  78

Solaris9 installation process under VMware

First, the software that needs to be prepared VMware Workstation5 Solaris9i for Inter. Triple SUNWXF86U-VMware.tar.gz package

Second, the installation step (1) VMware installation and the general Windows software have no difference, after installing, use the registrar to crack, OK.

(2) Setting in VMware 1. Click "New Virtual Machine" on the interface or select "File -> New -> New Virtual Machine" in the menu 2. Click Next to enter "Virtual Machine Configuration". Interface, select Typical items to build a typical virtual machine configuration for you by the system; selecting the Custom item to enter the wizard of the user's own virtual machine configuration (VMware's default disk space is 4G, you want to specify the Solaris space you want to press When the hour, the Custom item must be selected (at this point, the maximum space specified for Solaris is not the biggest space of the disk, because this is just the space size occupied by Solaris in the virtual environment, so try to get bigger, haha. After the actual installation Generally, the disk space is usually occupied by about 1.2g). 3. Next, select the type of system to be installed, Solaris9. Next, specify the installation location, it is best to find a disk (4G or more) [Next, Memory takes the default; ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [Next, Disk, select Create a New Virtual Disk; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ - Unique] [Next, Disk Capacity specifies the size of the desired Solaris system, don't be too small, you can overdraw it; ------- Select Custom] [Next, Disk file take default Other.vmdk, ------------------------------------------ Choose Custom At the time of the next step, then click Finish, end the new virtual machine;

4. Right-click Other, point Edit, and press your own requirements, if you use the ISO file installation, click "Use iso Image" of the CD-ROM, then specify the path to the image, select SOL-9-U2-X86- V1.iso file. 5. OK, click Finish, and click the "Power ON" button (you can also start the virtual machine on the direct this Virtual Machine on the interface. 6. Press F2 to enter the virtual machine's CMOS, start order set into CDROM, Hard Drive, Removable Devices, Point F10 - Enter, exit and restart. 7. After restart, enter the Solaris Device Configuration Assistant interface, press F2. (At this point, check the machine even on the LAN, no words, even if you go to find a terminator to plug in the NIC, you don't have any words, you don't have it) 8. Press F2 to confirm the Identified Devices 9 Select the CD installation, F2 continues. (At this time, the machine has to flash to flash, you will wait good) 10. After you flash, enter the Select A Language interface (Chinese people will choose 6) 11.Select a logale (vomiting recommended 2) 12. "The Solaris Installation Program", lists some nonsense, F2 continues 13. "Kdmconfig - Introduction" is roughly the way to set and test the parameters related to the Window display, I choose F2_Continue to enter the settings; F4_BYPASS is jumping After these settings enter the character command line installation, interested, although try.

14. Select Change Video Device / Monitor, F2 Continue 15.Video Device Select 16 Color Standard VGA with Panning @ 800 * 600 (256K), F2 Continue 16.Monitor Types Select Super VGA 35.5KHz (800 * 600 @ 56Hz and 1024 * 768 Inter Laced, F2 Continue 17.screen Sizes Select 14-Inch (36cm), F2 Continue 18.Virtual Screen Resolutions Select 800 * 600, F2 Continue 19.f2 ---> F2 Continue, enter the test environment 20. Flash After that, there is a pile of various colors icons. Congratulations, the test is successful, please drag your mock, find a Yes icon points 21. Enter a installation interface, now you have to play the drag and 拽, Because the graphics card is still not set yet, it can only be almost, F2 continues 22. Networking - Of course, the choreography; DHCP --- No; host name --- I will help you with it; ip- - Specify an IP of IP in the same network segment with your PCWIN2K; subnet - of course is it; mask --- 255.255.255.0; enable IPv6 ---- No; Default Routing --- Default ; F2 -> F2; Configuring security policies --- No; Naming Service --- None; Time Zone --- Asia; Country ---- China 23.Solaris Interactive Setup --- F2_ Standard 24. Geographical Region --- Asia 25. Select the software --- is the first 26. Select Disk --- F4_ Edit (You will not be farther again!); Select an option --- Select the first, F2 determination Set the fdisk partition, F4_ creation of the hard disk, then f2_ determination, then f2_ determination, then f2_ editing; (no nickname?) ---> f4_ hand setting ---> F4 setting, this interface is quite ripe, give You a reference setting (

/ --- 3G, swap --- 500m, / usr --- 2g, / var --- 200m, / export / home --- 200m, there is a fundamental principle that the bigger the roots, the rest of the rest of the big Part of the directory even if you do not specify, it will automatically build one, more troublesome, press F2; ​​browse your settings, F2 ---> f2 ---> f2 (brief table); Reboot after installation - I selection manually reboot, you casually; F2_ start installation; then press F2. 27. Has the original schedule, is that a few vertical lines, finally entered the topic, wait. Don't think that the schedule is used, I have seen it every time I see it. 40% left, suddenly showed 100% and then waiting for you Reboot. 28. Restart, hand, but also f2 into CMOS, change the order of boot to Hard Drive, CD-ROM second Otherwise, you will then load a CD1 bar 29. Good, F10 - Enter exits, restart, enter a long stage, system to configure and detect N more things, remember to take the network cable, otherwise wait for death . If you are in a hurry, you will be able to enter root password: 31. The system is ready to start, it is going to start, it is ready to start. I can't let go, I don't give up, I consume it, it will give up in five minutes; at this time, the dawn is getting clearer, haha; have you seen a black interface? Will just click, wait for the graphics card and now, it is the sky in the sky. 32. If this time it speaks unable to run web, you have to press any key to restart, press it to do it; Will enter a black interface, pop up a terminal, prompting that the following installation will be made under Command Line, and then change the disc; first select 1, enter; at this time, if it is an ISO file installation, The mouse is separated from VMware, I saw a few small icons in the lower right corner of VMware. Double-click the icon that is like a disc will pop up a dialog box. In this dialog box, change the ISO file to Software2, then go back to VMware. Inside, see it "Press ENTER" after inserting the CD ", then press Enter; not always, the system will then install Software2. (Episode: You don't find that small icon in the bottom right corner of VMware, save you, right click on the blue title bar of VMware, choose Show Controls, this is the icon. .

33. This is another super slow process. After installation, the system will display the installation details, you enter 2 ("Completed") that, enter the car, how to change If you don't have to talk freely. 35. After changing the disc, Enter enters the installation interface, there are three options. The first is to install all, the second is restart, the third is to exit installation. There is a courage to install the first (Install all), there is a day, Korea, law, morality, meaning, simple, medium, etc., how can you take a few G hard drives. Temperates Recommended: Select the third exit installation. Because there is no custom installation option here, the language pack is reserved when it is closed. In fact, my purpose is just letting you change the disc to the third. So you will exit and reocconate. 36. After restart, it will allow you to enter the root password, enter the command line interface for some maintenance, don't worry it, consume, wait to enter the login interface, the 16-color interface is not good, but you must completely change La. 37. After entering the graphical interface, open a terminal first, create new users: usewd temptest; Passwd Temptest 38. Your computer has FTP software, use the newly built user name to put this package sunwxf86u-vmware.tar.gz Go to Solaris (recommending you to use WinRAR to take it into the TAR package in the outside. 39. Go back to Solaris, enter you to store the directory of the sunwxf86u-vmware.tar file, run: tar -xvf sunwxf86u-vmware.tarmkdir / tmp / vedio chmod 777 / tmp / vendio gunzip sunwxf86u-vmware.tar.gz tar XVF SUNWXF86U-VMware.tar This will see two folders SUNWXF86R and SUNWXF86U Pkgadd -d / tmp / vedio / sunwxf86u pkgadd -d / tmp / vedio / sunwxf86r 41. Finally, the configured graphics! ! Open a terminal, root permissions, run the Kdmconfig F2 to enter the screen below, press me: configure devices [] no changeded-test / save and exit [x] change video device / monitor [] change keyboard [] Change Keyboard [ ] Change Pointing Device

Video Devices [] XF86-VGA VGA-Compatible Video Cards [x] XF86-VMware VMware Virtual Video Adapter [] Zenith Z-Note GT (1MB)

Monitor Types [] SIEMENS MCM2102 (-K352) (UP to 90Hz) [x] Super VGA 35.5 kHz (800 * 600 @ 56Hz and 1024 * 768 Interlaced)

Screen Sizes [x] 14-inch (36cm) Resolution / Colors / Refresh Rate [x] 1024 * 768 - 16777216 Colors Interlaced

Virtual Screen Resolutions [x] 1024 * 768

F2 Continue ---> f4 ----> SYNC synchronization ----> SYNC again synchronize ----> Reboot.

42. At this time, it should be able to enter the normal login interface, but English, so now I have to receive the Languane; open a terminal CD / CDROM / CDROM0; ./installer enters the graphics installation interface to install the Language; Definition, otherwise what is it for? If there is no special demand, all languages ​​other than Solaris 9 Simplified Chinese Localization are not installed, too taking space; in addition to the safety, after restarting You can use the Chinese interface. 43. All the installation ends.

In my installation process, it is mainly referring to the spider post, but there are very different places during the installation process, and the Solaris9i is no longer used to play what patch, and the graphics card drive. Retry multiple times, summarizing the above Dongdong, I have installed one on one IBMT30 and a PC, everything is OK.

转载请注明原文地址:https://www.9cbs.com/read-11516.html

New Post(0)