IIS configuration management online tutorial setting Raiders
The mail This application tutorial is completed in the Windows 2000 Advanced Server environment, which describes the installation, setting, and use of each common service comes with the 2K server. This series of tutorials have a total of nine articles, involving the service installation, network attribute settings of the 2K server; the web server and the installation settings and use of the web server and the FTP server in IIS.
◎ Example of this tutorial: Suppose this IP address of this unit is "192.168.0.48", and wants to establish an e-mail address called "Nanshan@163.net". ◎ Setting of the first section of the common service installation and network attributes: teach you to install IIS, DNS, and DHCP services and set settings for TCP / IP properties. ◎ Settings of the second DNS server: Tell you how to create a mapping table for domain names and IP addresses in the DNS console. ◎ Section 3 DHCP server setting: Use the DHCP server to automatically allocate network attributes for each station, dilute the strength of network administrators. ◎ Section 4 WWW server settings (on): Default Web site setting method. ◎ Section 4 WWW server settings (below): Manage the setting method of the web site. ◎ Section 5 FTP Server Settings: The setting of the FTP server. ◎ Section 6 IIS FAQ: Includes how to build a number of questions such as multiple independent servers with an IP address. ◎ The installation and setting of the seventy terminal service: It doesn't have to say it, huh, the end of the disk. ◎ Issue 8 Terminal Services Advanced Client (TSAC) installation and setting: The client does not need to install any software, use the browser to log in directly to use 2K terminal! ◎ Article 9 Initial IIS: Take the IIS setting Web site as an example, providing a common problem solution in IIS settings.
The first section adds a common service; set network properties
I. Introduction to common service
1, DNS (Domain Name System): Domain Name System. It provides a name (ie, "www.abc.com" on the Internet (即 www.abc.com ") to the address (ie," 192.168.0.48 IP address) mapping service for domain name analysis.
2, IIS (Internet Infomation Server): Internet Information Services. It is a web service that mainly includes WWW servers, FTP servers, and the like. It makes it easy to post information on intranet (LAN) or Internet (Internet). IIS 5.0 is available on Windows 2000 Advanced Server.
3, DHCP (Dynamic Host Configure Protocol): Dynamic Host Configuration Protocol. It is a TCP / IP standard designed to simplify management address configuration. It uses server centralized management of IP addresses and other related configurations (such as gateways, DNS servers, etc.) on your network.
Second, add DNS, IIS and DHCP services
1, add IIS. Select "Control Panel → Add / Remove Programs → Add / Delete Windows Components → Internet Information Services → All Choice".
2, add DHCP and DNS. Select Control Panel → Add / Remove Programs → Add / Delete Windows Components → Network Services → Select: Dynamic Host Configuration Protocol DHCP → Select: Domain Name Service System DNS.
3. After the addition is successful, you don't need to restart, you can see and use the relevant services in the Start → Programs → Administration Tools. As shown below:
Third, network attribute settings
To use the above services, this unit must have a static (ie fixed) IP address. If it is only used in the LAN, in principle, any IP address can be used, most commonly used in "192.168.0.1" to "192.168.0.254" ranges. To bind a static IP address for the network card, follow the following: 1. Open the Network Properties Settings window: TCP / IP Properties Settings Window. Select Control Panel → Network and Dial Connections → Local Connection → Properties → Internet Protocol (TCP / IP) → Properties.
2, bind the first IP address for the NIC: This IP will also become the default IP address of this unit. Select "Use the IP Address below", enter "192.168.0.0.0.0.48" in the "IP address"; enter "255.255.255.0" in the subnet mask column; if this machine is also the server in this network, then " The default gateway "and" preferred DNS server "are also filled in this default IP address; if the unit is not a server in this network, the value of the" default gateway "and" alternate DNS server "value is the server's IP Address, and "preferred DNS server" is still the default IP address of this unit. This article assumes that this unit is a server in this network, as shown below:
3, to bind more IP addresses for the NIC: "Advanced" in the upper step, then select "Add", then enter the second IP address "192.168.0.49", its corresponding subnet mask "255.255.255.0 "The system will automatically fill; add more IP address methods. As shown below:
4, after all settings are completed, do not need to restart, exit this network attribute settings window, set it out!
5. Verification after the network properties
In order to test whether the settings are successful, the following usual method can be used:
1. Enter the MSDOS method: select "Start → Run", enter "CMD" and "OK".
2, check the IP address configured by this machine: Enter "ipconfig" and then enter the car, you can see the relevant configuration. As shown below:
3. Verification can also be performed by entering "Ping 192.168.0.48" format.
Section 2 DNS server settings
First, DNS Overview
When the computer communicates on the network, only the digital address such as "192.168.0.48", why can we open a browser, enter the domain name of "www.abc.com" in the address bar, you can see it. What about the page we need? This is after we enter the domain name, there is a "DNS server" computer automatically combines our domain name "translation" into the corresponding IP address, then call the webpage corresponding to the IP address, and finally pass back to our browsing We can get results.
DNS is an abbreviation of domain name systems, a computer and network service naming system for organizing an domain hierarchy. DNS is named for TCP / IP networks, such as Internet, to locate computers and services through user-friendly names. When the user enters the DNS name in the application, the DNS service can resolve this name to additional information related to this name, such as an IP address.
Therefore, we want our internal Internet domain names to be successfully parsed (ie translated into IP addresses), you need to build our own 2K machine into a DNS server, which contains our domain name and IP address. Map table. This usually needs to create a record, A is the shorthand of Address, meaning "host record" or "host address record", is the most common in all DNS records.
Second, DNS settings
1. Open the DNS Console: Select "Start Menu → Programs → Administrative Tools → DNS".
2. Establish a domain name "admin.abc.com" mapping the host record of IP address "192.168.0.50".
1 Create "COM" area: "DNS → WY (Your Server Name) → Positive Search Zone → Right Key → New Area", then select "Standard Main Area" based on prompts, enter "COM" at the Name. As shown below: 2 Create "ABC" domain: select "COM → Right-click", enter "ABC" at "Type the New Domain".
3 Establish an "admin" host. Select "ABC → Right", "Name" is "admin", "192.168.0.50", and press "Add Host".
3. Establish a domain name "www.abc.com" mapping the host record of IP address "192.168.0.48".
1 Because the domain name "www.abc.com" and domain name "admin.abc.com" are located in the same "area" and "domain", it has been established on the step, so it should be used directly, only need to be "" Domain "Add corresponding" host name ".
2 Establish "WWW" host: select "ABC → Right", enter "192.168.0.48" at "192.168.0.48" at the "Name", "IP Address", and finally "Add Host".
4. Establish a domain name "ftp.abc.com" mapping the IP address "192.168.0.49" host record method is the same.
5. Establish a domain name "abc.com" mapping IP address "192.168.0.48" host record method is also the same as the above, just to maintain a "name"! After the establishment, its "name" will be displayed "the same as the parent folder". The establishment of a good DNS console is shown below:
6. Establish more host records or other recordings. After more on the establishment, as shown below:
7. It is also possible to use the entire "ABC.COM" as "region", and then build "host" directly below it. However, this method is more inconvenient for similar records.
Third, the verification after DNS settings
In order to test whether the settings are successful, the "ping" commands that are self-contained in 2K are usually used. Format, such as "ping www.abc.com". Successful tests are shown below:
Section III DHCP Server Settings 1. DHCP Overview DHCP is an abbreviation for dynamic host configuration protocol (Dynamic Host Configure Protocol). A DHCP server allows administrators to centralize and designate global and subnet-specific TCP / IP parameters (including IP addresses, gateways, DNS servers, etc.) for the entire network. The client does not need to manually configure TCP / IP; and, when the client is disconnected, the old IP address will be released to reuse, depending on this feature, such as you only have 20 legal IP addresses, and you The management machine has 50, as long as the 50 machines use the server DHCP service without more than 20 sets, you will not produce insufficient IP address resources. If conflict detection settings have been configured, the DHCP server will try the connectivity of each available address in the PING test domain before providing the address in the lease to the client. This ensures that each IP address provided to the customer is not used with another non-DHCP computer configured with manual TCP / IP. Second, the setting of DHCP 1, open the DHCP manager. Select "Start Menu → Programs → Administrative Tools → DHCP", the default, there is already your server's FQDN (Fully Qualified Domain Name, completely qualified domain name), such as "Wy.wangyi.SANTAI.com.cn". As shown below: 2, if there is no server in the list, you need to add a DHCP server. Check "DHCP → Right-click → Add Server", select "This server", then press "Browse" to select (or enter) the server name "WY" (ie the name of your server). 3. Open the role setting window. First select the FQDN name, then press "Right" → New Scheme ". 4, set the role domain name. The "Name" item in this place is only prompted, and can fill in anything. As shown in the figure below: 5, set the assigned IP address range: such as "192.168.0.0.0-92.168.0.0.244", fill in "192.168.0.0.0.10", "End IP Address" in "Start IP Address" item " 192.168.0.244; "Subnet Mask" item is "255.255.255.0". As shown below: 6, if necessary, enter the desired IP address or IP address range in the following options; otherwise click "under" One step. "As shown in the figure below: 7, the following" Lease Term "can set the validity period of the IP address allocated by the DHCP server, such as a year (ie 365 days). As shown in the figure below: 8, choose" Yes, I want to configure these Options "to continue to configure the default gateway assigned to the workstation, the default DNS service address, the default WINS server, enter the IP address" 192.168.0.48 "after all the IP addresses" 192.168.0.48 ", then prompt Choose "Yes, I want to activate the scope" and then click "Finish" to end the final settings. After being built, as shown below: Third, the verification after DHCP settings will be set to the network properties of the workstation within this website. "Automatically obtain IP address", and let DNS servers are "disabled", the gateway column remains empty (ie, no content), after the reboot is successful, run "WinIncfg" (in win98) to see the assigned success !
Section III IIS WWW Server Setup (on) 1. IIS Overview IIS is an abbreviation for Internet Information Server. It is a web service that mainly includes WWW servers, FTP servers, and the like. It makes information on intranet (local area network) or Internet (Internet) into a very easy thing. IIS 5.0 is available on Windows 2000 Advanced Server. Using this 2K self-contained IIS 5.0 can establish the most commonly used WWW and FTP servers on 2k machines, achieving the most basic browsing and file transfer capabilities, can meet people's general requirements. In this article, if you want to set up WWW, in order to facilitate it, you can first want to implement the goal: (1) I have point to the DNS "www.abc.com" to the IP address "191.168.0.48", requiring Enter this domain in the server to call the web file in the "D: / MyWeb" directory. (2) I have pointing the domain name "www.bbc.com" to the IP address "191.168.0.51", requiring this domain in the browser to call the web file in the "E: / Website / Wantong" directory. . (3) I have point to the IP address "191.168.0.50" in DNS, and you can enter this domain in the browser to remotely perform IIS management. Of course, all the domain names above can also share the same IP address all or part, and in this case the method is not the same. Please refer to the content of this tutorial; for the addition of multiple domain names described above and the DNS settings section, see the previous discipline related content. Second, "www.abc.com" setting 1. Open IIS Manager: Select "Start Menu → Programs → Administrative Tools → Internet Information Services". As shown in the figure below: 2, set the "default Web site" item: "Default Web Site" is generally used to correspond to the WWW site that is open to everyone, such as "www.abc.com" in this article, any users in this website can be Limited to view it through your browser. (1) Open the "default Web site" Properties Settings window: Select "Default Web Site → Right Keys → Properties". (2) Set "Web Site": "IP Address" column selected "192.168.0.48"; "TPC port" maintains the original "80" unchanged. As shown below: (3) Setting "Main Directory": In the "Local Path", select the directory where your web file is selected by "Browse" button. This article is "D: / MyWeb". As shown below: ⑷ Set "Document": Make sure the "Enable Default Document" is selected, add the required default document name and adjust the search order accordingly. This role is that after entering only domain name (or IP address) in the browser, the system will automatically press "Subsitial" in "Main Directory" (from top to bottom) to find the file name specified in the list, if you can find The first one calls the first; otherwise look for and call the second, third ... If there is no file name in this list in the "Main Directory", the error information of the file cannot be displayed. As shown below: ⑸ Other items can be modified, directly press "OK", there will be some "inheritance overwriting" and other dialog boxes, and then "OK", "Determine", "Default Web Site) "Attribute settings. As shown below: ⑹ If you need, you can add a virtual directory: For example, there are addresses such as "www.abc.com/news", "news" can be the next level of the "home directory" (aunt called " Actual directory "), you can also in any any directory, that is, the so-called" virtual directory ".
To create a virtual directory under the Default Web Site, select "Default Web Site → Right", New → Virtual Directory ", then enter" News "at the" Alias ", select its actual path at the" Directory "( For example, "C: / NewWeb"). After being built, as shown in the following figure: 3, "www.abc.com" Test opens the browser on the server or any workstation, enter "http://www.abc.com" and enter the car, If the setting is correct, you should directly call the page you need. As shown below: Section 4 IIS WWW server settings (below) 3, "www.bbc.com" setting 1, create a new Web site: select "WY → Right", "Name" Enter anything (This is the site I added "), then select the corresponding IP address" 192.168.0.51 "and its corresponding directory" E: / Website / Wantong "; if you want to give this site CGI Waiting for the right to select the corresponding item accordingly. After being built, as shown below: 2, modify its properties: Method, see the "www.abc.com" setting step. 3. The verification method is also a feature of the article "http://www.abc.com". 4. Add more Web site methods to this step, but pay attention to use different IP addresses (or port numbers)! For a way to use the same IP address, the same port number is used to establish a different web site, see the content of this tutorial. Fourth, "Administrator" is generally used to correspond to the IIS administrator's WWW site, such as "admin.abc.com" this article, which allows IIS administrators to come through the browser Remote implementation of IIS management and control. 1. Open the "Manage Web Site" Properties Settings window: Select "Manage Web Site → Right Keys → Properties". 2, set the "Web site": "IP address" column selected "192.168.0.50"; "TPC port" maintains the original "4884" unchanged. As shown below: 3, "Main Catalog" item Do not modify, keep the original path "/ Winnt / System32 / InetSrv / Iisadmin" unchanged because this is the directory where the management file exists. 4, set "Directory Security": Generally only change the "IP address and domain name limit", select "Edit" to open the IP Address and Domain Limit setting window. By default, in addition to the IP address "127.0.0.1", all of all will be rejected to run the "Manage Web Site" (as shown below); actually made the previous settings, at this time, any address cannot be accessed It needs to be selected "Authorization Access". 5, other items can be set up again. Now open the browser, enter "http://admin.abc.com:4884" to verify: (1) One window will pop up, enter "Administrator", "Administ", "Password", enter the corresponding password, as follows Figure: (2) The management interface called is shown below:
Section 5 IIS FTP Server Setting 1, IIS Overview In this article, if you want to set up FTP, for convenience, you can first want to implement the goal: (1) I have "ftp.abc.com" in DNS. Point to the IP address "191.168.0.49", requiring the domain name (or IP address) to enter the corresponding format to log in to the "D: / MyWeb" directory using FTP-related services. (2) Of course, this domain name can also share the same IP address in any of the WWW site because they have different default port numbers - the default port number of WWW is 80, and the default port number of FTP is 21. Second, the setting of "ftp.abc.com" 1. Open the "default FTP Site" property window: select "Default FTP Site → Right Key → Properties". 2, set "FTP Site": Select "192.168.0.49" in the "IP address", the port number remains "21" unchanged. As shown in the figure below: 3, set "message": Enter the welcome information after the login is successful in the "Welcome" box, "Exit" is exit information. As shown below: 4. Set the "primary directory": Press the "Browse" button in the Local Path to select the target directory "E: / MyWeb". As shown below: 5, set "Security Account": Default, Anonymous) is allowed to log in, if necessary, you can choose to reject its login to increase security; or add other users to manage this FTP server Name (default "administator"). 6, set "Directory Security": The IP address of the computer that is only allowed or only rejected to log in to this FTP server is set. 7. If necessary, click Right-click "New" to create a new FTP virtual directory. Third, "ftp.abc.com" test 1, log in in the browser: Format is "ftp://ftp.abc.com" or "ftp: // username @ ftp.abc.com". If an anonymous user is allowed to log in, the first format will use an anonymous login; if anonymity is not allowed, the option window will pop up for entering the username and password. The second format can be directly specified to log in with a username. 2, log in under DOS: Format is "ftp ftp.abc.com". As shown in the figure below: 3, log in with FTP client: As shown below is the settings in cuteftp: 4, if there is a "virtual directory" or "actual directory" with the user with the user under the "home directory", Log in directly into its same name directory.
Section 6 IIS FAQ 1, Q: My machine has multiple IP addresses, and they correspond to their respective domain names, how to build multiple WWW sites to different directories? A: You need to point the "IP address" in the "Web Site" option in each Web site to point to different IP, and then select the path in the "home directory". 2, ask: My computer has multiple IP addresses, and they correspond to their respective domain names, how to build a WWW site to the same directory? A: You can create multiple web sites, select different IP, and then point the path in the "Home Directory" to the same directory; or other programs such as ASPs can be used to implement. 3, ask: My computer only has an IP address, I have pointing multiple domain names in DNS, how to establish a WWW site to the same directory? A: Simply create a web site, select this IP address. 4, ask: My computer only has an IP address, I have pointing multiple domain names in DNS, how to build multiple WWW sites pointing to different directories? Answer: IIS 5.0 can support an IP address corresponding to multiple independent domain names, which can be implemented in two ways: (1) Set different TCP port numbers: you need to separate the "Web Site" option of each Web site "TCP port" points to different port numbers, and then selects different directory in the path in the "home directory". Call the format, such as "http://www.abc.com:99". (2) Set different host name: You need to fill in the "Host Name" in the "WEB Site → Advanced → Editing" of each Web site, in the following picture, and then "Main Directory" The path selection of different directories. Call the format, such as "http://www.bbc.com". 5, ask: How to limit the maximum number of connections to each web site? A: Select the "Web Site" option, "XXX" in the "Limit to XXX Connections" is changed to the required value. 6, ask: If you display the directory and file list of the calling directory when there is no "default document"? A: Choose the "Home Directory" option to select "Directory Browse". 7. Q: How can I do when the page does not exist or have other errors? A: Go to the "/ Winnt / Help / Iishelp / Common" directory, where "400.htm" is the error prompt page that appears when the call does not exist, the editing itself as you need; other prompt information can also Modifications are made by this approach. 8. Q: How do I only allow the authorized user to access my site? A: Choose "Directory Security" option, then select "Anonymous Access and Verification Control", then select "Edit", remove the "Anonymous Access", then you must enter the corresponding username and password when the user is accessed (all Authorized users in 2K users can enter! Or select "IP Address and Domain Limit", add "Edit" to the IP address of the computer that only (or rejected) access to the computer. 9. Q: I can't succeed when I log in to FTP in other users other than anonymous and administrators. why? A: The possible reason is: (1) The user's account has passed the validity period and needs to be reset. (2) When establishing a user account, select "You must change your password next time", you need to turn this item, and then "password is permanently valid".
(3) If the user does not have the right to log in this unit, you need to add the following three groups "administrator", "power users", "Power Userus" in one of the "backup Operators"; or run "gpedit.msc", select "computer Configuration → Windows Settings → Security Settings → Local Policies → User Rights and Assignment, then double-click "Log in" to "Add" to "Add" to "Add" to ". ⑷ The password is incorrect and needs to be corrected. 10. How to refuse the anonymous connection of the FTP user? A: Select the "Security Account" of the FTP site to remove the hook before "Allow anonymity connection". Beautiful coat for your Win95
- Installation and setting of Win2K Terminal Services
I. Terminal Services Overview If someone tells you, Windows 2000 runs like a grandfather of his 32M memory, do you believe? But it is true! - Just because he uses the terminal service of Windows 2000 Advanced Server! Terminal Services provides the ability to remotely access server desktops remotely through "thin client" software that works as a terminal emulator. It has a bridge that migrates from old desktops to Windows 2000 Professional, providing a virtual Windows 2000 desktop environment for non-computer desktops and hardware upgrades that require hardware upgrades to fully run the Windows 2000 operating system; you can also make you Manage your server from anywhere on the network. How to achieve? Very simple! You first have to have two machines that have been connected to the LAN, one (the higher the configuration, the better) should have Windows 2000 Advanced Server, as for another, huh, 95/98 / me / nt .. . With you! Second, the installation of terminal services 1, ready to work: The installation disc of Windows 2000 Advanced Server and two blank floppy disks. 2, the server-side installation (1) Add Terminal Services Components: Select "Control Panel → Add / Remove Programs → Add / Remove Windows Components", select "Terminal Services" and "Terminal Services Authorization", and then select "OK" Start installing the selected component, for all prompts, choose its default option. (2) After the installation is successful, after the prompt is restarted, you can see related components in the Start → Program → Administration Tool, including Terminal Services, Terminal Services Manager, Terminal Services Client Generator. And "Terminal Services Configuration" four items. (3) Making a client installation disk: Select the Terminal Services Client Generator, the "Create Install Disk" window, keep the default option constant, follow the tips to insert two floppicions (note the order mark) Soft drive to complete the production of the client installation disk. 3, the client's installation (1) Run "setup.exe" in the first installation floppy disk, all the selected default options can be installed according to the programs. (2) After the installation is complete, do not need to be restarted, see related components directly in the Start → Program → Terminal Services client, including "Client Connection Manager", "Uninstall" and "Terminal Services Client". Third, the setting of the terminal service 1, server-side-assignment to the terminal login: Open the Terminal Services Configuration window, select "Connection → Right Panel → RDP-TCP → Right" → Properties → Permissions ", and then target the target user ( Or group) name "Add" into the list. (Note: Default, "Administrator" automatically has permission to log in to terminal.) 2, client - establish a login connection (1) Open "Client Connection Manager", select "File → New Connection", enter the connection name (arbitrary ), Server name or IP address. (2) Select "Automatically log in with this information" and enter the corresponding username, password, and domain name. (3) The screen area is generally selected "800 * 600" and "full screen" is selected. Fourth, the use of terminal services 1, double-click the established login connection, you can automate the terminal login.
See what you have now on the screen, and what is the difference between 2K desktop? It can be said that it is cast from the same mold - only "Windows 2000 Terminal" reminds you: This is just a magical terminal service! 2, okay, now you can use the contents of the 2K server like the software running your machine! 3. Press the "Ctrl Alt Break" key key, you can convert between the window and full screen; "Start → Shutdle → Logout" can be exited in the terminal window. TSAC: 2K terminal service running through the browser
- "Installation and setting of Win2K Terminal Services" improvement
I. Tsac Overview TSAC (Terminal Services Advanced Client, Terminal Services) is a Web component and management kit based on the terminal service advanced client Win32⑨ ActiveX⑨ control, which allows the same function as the full terminal service client in IE. Terminal service session. With TSAC, you only need to install the files you need at once on the 2K server, then your client does not need to install any additional software, nor does it need to make any additional settings, open the browser directly, enter Corresponding address, you can get the same functionality as a normal terminal service client! It should be noted that TSAC must be installed in a server running IIS 4.0 (IIS, Internet Information Services) or later; clients can be 98 / me / nt / 2k, etc. The server side of this article takes Windows 2000 Advanced Server (hereinafter referred to as "2K") as an example. TSAC's installation file size is only 312K, and can be found in the "/ valueAdd / Tsac" directory of the 2K SP1 installation CD; or download it at the address provided herein. Second, TSAC installation 1, ready to work (1) Make sure the server is installed with the TSAC installation file. Download: http://www.enanshan.com/dow/tswebsetup.exe (312K) (2) Make sure the server is installed IIS 4.0 . This paper recommends using 2K self-contained IIS 5.0, in general, it has been installed by default. (3) Make sure the terminal service component has been added. If you do not, you can add "Terminal Services" and "Terminal Services Authorization" in "Control Panel → Add / Remove Programs → Add / Remove Windows Components". (Restart the computer.) ⑷⑷ Recommend the client system is 98 / me / nt / 2k. 2. Installation (1) of the server-side installation: Run the installation file "TSWebSetup.exe"; select the default option. Restart your computer according to the prompt after installation. (2) By default, TSAC related files will be installed to the "/ inetpub / wwwroot / tsWeb" directory of 2K disk. 3, the client's installation: The client no longer needs to install any other software. Third, TSAC setting 1, server-side settings (1) Open IIS Manager: Select "Start Menu → Programs → Administrative Tools → Internet Information Services". (2) Set the "default Web site" attribute: select "Default Web Site → Right Key → Properties → Web Site", select a local IP address in the "IP address" column, then press "OK" to exit; other items Can not be modified. 2, the client's setting: The client no longer needs another other settings. Fourth, TSAC use 1, open the IE browser on any client (or a server), enter as "http: // wy / tsWeb" ("WY" computer name) or "http: //192.168.0.48/tsweb "format, then enter the terminal login interface. 2. Enter the name (or IP address) of the 2K server in the "Server" column of the terminal login interface, select the appropriate resolution in "Size", and then click the "Connection" button. 3. Enter the corresponding username and password in the subsequent terminal login window, and then press "OK". 4, you can successfully call the desktop of the 2K server through the IE browser. V. Tsac FAQ 1, Q: I will not be able to use the "main directory" of "default Web Site" in the IIS Manager. Tsac cannot be used. What can I do? A: You need to set the directory of TSAC's related files to a virtual directory under the new "default Web site".
The method is: (1) In the "/ inetpub / wwwroot" directory of 2K, select the directory "TSWeb", click Right click, select "Share"; (2) Select the "Web Sharing", will "/ inetpub / wwwroot / TsWeb "shared as" TSWeb ", then determine. (3) The format is in the form of the previous, such as "http: // wy / tsWeb" or "http://192.168.0.48/tsweb". 2, ask: Can the desktop of the 2K server that tsac in the browser can display it full screen? A: Yes! Like a normal terminal server, the full screen / window is converted with a combination key "Ctrl Alt Break". 3. Q: Can you exchange files between the terminal window and the unit, such as copy, mobile, etc. A: If there is enough permissions, you can delete any files on the 2k server in the terminal window; however, the public clipboard between them can only exchange the copy of the plain text content. 4. Q: How do I close the terminal window? A: You can select the "Start" menu in the Terminal window, then select "Close System", then select "Logout XXX"; of course, the easiest way is to close it directly to the browser window! 5. Q: Can the client be restarted (or closed) 2K server? A: Yes! As long as the users you log in have enough privileges.
Preschool IIS WWW setting 1, ask: Is there any difference in "http: // IP address" and enter "http: // IP address /" in the browser? What will they do? A: There is no difference! The previous format browser will also automatically add "/"! They mean "sequentially" to find and call the "default document" under the corresponding "home directory". In addition, the "IP address" in this question can also be "domain name"; the reason is exactly the same. 2. Q: When doing a web page, enter the link with "IP Address" and enter "http: // ip address"? A: It is generally possible to enter two formats, but in fact they are different. In some of the more special formats, add "http: //" and do not add two things! In those places, the first format is seen as a directory link under the "current directory"; the second format looks it as a separate website starting from other "root directory". Therefore, for the insure, it is recommended to link to other sites in the web page, plus "http: //" before the corresponding domain name (or IP address)! 3, ask: Why do I have access to all the IP addresses when I have a IP address in INTERNET Information Services (IIS Manager), "http: // localhost /" access, but "http: / /127.0.0.1/ "Access will pop up username, password, and domain verification window. A: Normal phenomenon! At this point, you can see content you can see if you use "localhost" or "WY" (this name), but this is actually the help page of IIS5.0. For security or other considerations, the system default is that hostnames (including localhost and computer names you entered when installing) may, and IP addresses must be username and password - At this point "Administrator" and corresponding passwords can. 4. Q: I specified IP addresses (such as "192.168.0.1") in the IIS Manager ("192.168.0.1"), "http: // localhost /" http://127.0.0.1 / "No use;" http://192.168.0.1/ "" "" "" "" "" why? A: In order to understand the principle of a Central in order to know more clearly, I tried to analyze step by step, I hope it will not be "Luo Wei"! ^ - ^ 1 Open the browser at this time, enter the IP address and then enter, you will find it to enter you and password, then enter the administrator's username and password to enter; then you use this IP back Add a "win2000.gif" file name (such as "192.168.0.1/win2000.gif" format), you will be surprised to find that a picture appears, and does not need you to enter anything else! Why is this? (By the way, "http: // wy" is available, no password is required.
2 Please enter the IIS manager, select "Default Web Site → Right Key → Properties → Document", you can see that "default document" is three, and "default.htm", "default.asp", and "Iisstart.asp"; you will go to the "home directory", it corresponds to "d: / inetpub / wwwroot"; then open "My Computer", enter the "D: / INETPUB / WWWROOT" directory, Among them, "Iisstart.asp" and "Win2000.gif" are also obvious! It turns out that when you are in your browser, if you only enter the corresponding IP address (or domain name), it will automatically find the "Default Document" in its corresponding "main directory", which calls "Iisstart.asp" files. And this file itself requires username and password to enter; when you follow the name of the specified file name, it will only find and call this file, and this image file is not encrypted, so do you need a password? That is to enter! That is, this is not a setting problem! Instead, "IISStart.asp" this default call file itself plus secret! 3 How to solve it? Very good! You can change the "home directory" to any other directory you need; you can also copy a "default.htm" or "default.asp" or "default.asp" or "Iisstart.asp" in other directories. In short, don't With the original "Iisstart.asp"! - You will never see the annoying password window! :-D 5, ask: Why do I have the same operation as "Management Web Site" and "Default Web Site", but said that I have no right to access? "Manage Web Site" is used for what is used? A: Generally, we use the "default web site"; if you want to add more sites, just "New" site. As for "Managing Web Site", its home directory under "D: / WinNT / System32 / IneTsrv / Iisadmin", it allows you to reach and IIS Manager in any client (of course, server side can also) with a browser The same operational purpose - remote management IIS! Very useful! However, when you use the Manage Web Site, you must first know, in it, not only the special port number (different from the default 80 port), and the default only server "127.0.0.1" Such IP addresses can be accessed; other server and workstations are all in the category of "prohibiting" access! If you want all the machines to access, you need to do the following: 1 Enter the IIS Manager, select "Manage Web Site → Right Keys → Properties". 2 In the "Web site → TCP port", you can see the words "4884", which can generally do not change it; change the "IP address" column to the value you need. That is, the URL called "Managing Web Site" should be the format of "http://192.168.0.1:4884"! (": 4884" can not be omitted; only 80 ports can be omitted as ": 80" part!) 3 In "Directory Security → IP Address and Domain Limits → Edit", you can see the default only "127.0.0.1 "I can access it, and other IP addresses are" rejected ".