Client enhancement

xiaoxiao2021-03-06  55

Regret: 1. For DHCP's address settings, the CPU frequency can only take the current frequency 3, the NDIS layer is not implemented by the policy access network, and the support of the network firewall is not implemented. 5, IE repair title is "* **hall"

September 2nd Btask 1.0.0.1 played a package

BTASK 1.0.0.2 Take customer information, there is information behind 0 after the information, has been resolved

Take a MAC address, from the original MAC that only takes the first network card to take the first effective NIC Mac

Changed a lot of processing when reading the registration value, originally putting the results directly in the parameter, easy to cause effective value

There is garbled behind, and the unified change is changed to the buff, and then strcpy is copied into the parameter, and the error (when the value is too long,

Will exceed the capacity of the parameters, resulting in illegal coverage of memory, serious error occurs)

16:05 hit a package

On September 4, there were many MessageBox statements in the WinVNC series project, and the package sent the IE address column record, plus the determination length, and the implied error was removed.

On September 6, the function of testing the BTASK item 101 command in the ClientApp project. If it returns an error, then the line is on the line.

September 7th's registry of the binary type registry, has not been strictly tested, and this feature has not been suggested. The original / set the first Ethernet card to the current network card (through the current IP and type, two Conditions to judge

Broken) Pack Btash1.0.0.3

On September 8th, the function of the BTASK project has an error, temporarily removed, and then flipped, but the test is not big, and the test for this machine

The firewall generally does not block, so the function is removed. The lock keyboard has a problem, only lock once, there is a function of deleting the keyboard hook in the chook destructor (original plus,

Forgot to delete it), delete it. Take a package at night

September 9th 98 to get the MAC seems to have a wrong, how to take the dialing Mac? 98 how to quit? Do you quit it? Don't go off the line in Win2000, log in for a long time, then go offline, It's just OK, the problem is not large, don't take the time to check the IP modified part, and make a package getFirstMacadDress plus returning error.

Replace the function of the MAC address package BVERIFY1.0.0.10 (Urnsodize Mac) btask1.0.0.4, this version is not good to use the new product release, found that Host can't get it, change another function, OK, Find a package

September 10th, a new product was held, successful. Success. Huaxia Bank 13964012090 3183318 Support@beelink.com ??

Note that the MAC address in BVERIFY is not updated

On September 13, the MAC address in BVERIFY was changed to take the current MAC to determine the check of BVERIFY to determine the IP / MAC binding situation. After the test is tested, no problem is due to the inconsistency of IP / Mac, but in the login window Still timing, and the icon has become red, it has been solved, in Frame

Ontimer plus a sentence of the change. There is a very few, it has always been online, and it is actually not online, click the next line and then go online, it is ok.

It is. Will take the history of the IE address bar to history, the maximum 999, played a package

9.14 Test, no problem!

转载请注明原文地址:https://www.9cbs.com/read-116620.html

New Post(0)