Bundle Mac and IP address

xiaoxiao2021-03-06  51

Bundle Mac and IP address

First click "Start" to select "Run", then enter the WiniPCFG command inside, which can detect your own network card address (as shown). After the record, let the network administrator make the network administrator to bundle the static IP address of your Internet with the network card address recorded. The specific command is:

ARP -S 192.168.0.2 AA-BB-CC-DD-EE-FF

In this way, it is bound to computers with the IP address 192.168.0.2 of the Internet and the NIC address, even if others are stealing your IP address 192.168.0.2; Server Internet. It should be noted that this command is only useful in the LAN's proxy server side, but also a static IP address, like a general Modem dial-up network is a dynamic IP address. The function of the specific parameters of this command is as follows:

ARP-S-D-a

-s - Bind the corresponding IP address with the physical address.

-d-- Delete the bundle of the IP address given to the physical address.

-a - The IP address and the corresponding physical address are displayed by querying the ARP protocol table.

转载请注明原文地址:https://www.9cbs.com/read-118111.html

New Post(0)