Select (reproduced) about Passat Masterway

xiaoxiao2021-03-06  68

Selection of PASSAT manual car shift timing

First of all, it will be explained: the Passat car is equipped with 1.8, 1.8t and 2.8v6 engines are Audi Carstributes from Sports Characteristics. The engine per cylindrical door (three into two outs) is high in high speed, so it belongs to the high rotation engine category. Since it is a high speed engine, a large power and torque can be output when the speed is high. The Passat car is relatively heavy (SAD PASSAT is 10 centimeter, which makes the vehicle weight by about 100 kg), and in comparison, the discharge of 2.0, 1.8, 1.8T engine is not big. The displacement is not large and the speed is fixed: small displacement engines output power and torque at low speeds often do not have a large displacement engine. Therefore, it will feel power when starting speed, in other words, the low displacement engine low-speed reserves are insufficient. After you understand this feature, you will take the speed of the engine as soon as possible to get the sufficient power and torque required for speeding. This is the theoretical basis of 1.8 and 1.8T engines to pull high speed shift.

Selection of manual vehicle shift timing:

A working chart of the engine (the power of the engine and the torque output graph); the second must see the speed ratio of each gear.

I have an experience of 1.8T car:

One gear 2000 rp / min ~ 2500 rpm; 2 gear 2500 rp / min ~ 3000 rev / minus three gears; three gears 2500 rp / min ~ 3000 turn / points up four gears; four files 2500 rpm / Different to 3000 rpm / minus five gears.

In fact, such a shift does not feed oil, no machine. Because the stepping of the oil gallop speed to 3000 rpm, it takes only a few seconds, and the engine continuous work is extremely smooth, and it is a good! Conversely, often high-grade low-speed driving, will increase the load of the engine and gearbox, which affects its life.

If someone thinks that the 3000-turn / split file is too large, the speed is too high. Look at these engine speed meter: 6400 rpm into the red area, 3000 rpm does not reach half of this limit, so it should not be a high speed!

It's really inner way to see the doorway, and the outside is lively!

转载请注明原文地址:https://www.9cbs.com/read-120299.html

New Post(0)