AIX installation

xiaoxiao2021-03-06  77

First, install the basic operating system (BOS) Open the computer or restart (#Reboot) in the power-on state to put the AIX installation disk into the optical drive When the system self-test Keyboard passes, press "5" (from the CD-ROM drive) System Tips: please After define the system console, press "1" (Verify Terminal) System Tips: Type A "1" and press Enter to Use this terminal as the system console Press 1 (Select English to install language) Enter the installer, follow system prompts Operation: Select "2 Chang / show installation settings and install" Other options do not need to change, just do two items: Change the installation method to "New and Complete Installation" Select the Disk to install the system to start install.

Second, set the terminal type (TTY) After the installation Term = IBM3151 (Set the terminal type, otherwise you can't access the SMIT) #SMit TTY (setting the terminal type, otherwise the terminal is started later) Select the Terminal type) Select Chang / Show Characeristics of a TTY (Modify) Modify Enable Login to "Enable" TERMINAL TYPE is IBM3151, install bundle #smit easy_INSTALL Select Input Device / Directory for Software for [/ dev / cd0] (Press F4 Select) Select SELECT A FileSet bundle to Server and App-DEV (with graphics) to choose graphics-startup ) Fourth, the choice to install the software into the #smit software installation and Maintenance-> install and Update-> SoftwareInstall and Updata from LATEST Available software selected INPUT device / directory for software is [/ dev / cd0] (press F4 selection) sOFTWARE to install into the Select the software you want to install, there is "@", has been installed with " " inquiry is not installed, if the graphics terminal is not installed, the following must be installed with "X11" must be installed: bos.compat (compatible AIX 3) BOS.DATA BOS.DOSUTIL (DOS Utility) About INFO, MSG must be loaded five, set TCP / IP #LSDEV-CC Adapter View NIC settings (Select IBM 10/100 Mbps Ethernet PCI Adapter) #Smit TCPIP Selection " Minimum Configuration & Startup Select "EN0 Standard Ethernet Network Interfa" in the "Available Network Interface" dialog box CE "Note: If there are multiple network cards, according to the settings of the previously viewed, select the correct network card, generally do not select" ET0 IEEE 802.3 Ethernet Network Interface "The host name (F50-CMIS) is filled in HostName. In Internet Address (Dotted Decimal) Sets IP Address (16.54.2.7) Mask in Network Mask (Dotted Decimal) Mask (255.255.255.0) Setting up the gateway in the DEFAULT GATEWAY Address in Your Cable Type Select "TP" to press Enter ( ENTER) Run Six, set VG (Volume Group) #Smit VG Select Add A Volume Group Settings Volume Grp Name Set Physical Partition Size In Megabytes (PP Value, typically 2.2g 4, 4.5G can be set 8, 9.1g 16) Set the Physical Volume Names (Select the desired disk) All selected, press Enter to run seven, set the LV (logical volume)

#SMIT LV Select Add A Logical Volume Volume Group Name Select the name of the LV from the LV to the LV size in the Number of Logical Partitions in the Number of Logical Partitions (the number of Logical Partitions), a LP default When equals a PP), press Enter to press Enter to run eight, set file systems #smit to enter System Storage Management (Physical & Logical Storage) -> File Systems-> Add / Chang / Show / Delete File Systems-> JOURNALED File System-> add journal-system modified this file system block (Size of File System), a piece of 512 Bytes modifies Mount Point (specify paths for the file system, such as [/ Oracle]) decides whether it is automatically mount when the system is started. After all the file systems are selected, press Enter to run Nine. Install the C and C Language View the software installed in the C language in the C language (Software Must Be installed) #LSLPP -L | grep bos.adt. INCLUDE #LSLPP -L | GREP BOS.ADT.LIB Use two commands to view these files for Comitted #smit install_latest Put the C / C language mounting disk into the optical drive into the Input Device / Directory for Software Selection "/ dev / cd0 (SCSI MultiMedia CD-ROM Drive) Medium disk Connect (specific connection method to view 7133 / model 600 random data) Note: The disk of the 7133 SSA interface is loop connection. After the SSA Adapter after the host, the hard disk is connected in this loop. That is, the host is used hard disk #CFGMGR (activation system, configuring disk) Note: After the connection is connected, then the system automatically calls CFGMGR eleven. The system disk hot plug must make the LV (Logical Volume) in the VG in the disk you want to perform Umount #LSVG -L DataVG (View Details in DataVG). #Df -k (View File System Information) #umount / CMIS (Umount File System CMIS) #varyoffvg DataVG (DTAVG) #lsvg-# (View Current Activated VG) #Exportvg DataVg. (Output DataVG) This disk can be taken (the disk can be built-in). Put the disk in another host #importvg -y datavg hdisk1 (type the command on another host). Second, backup strategies rootvg can use #Smit mksysb to back up file systems in DataVG can enter Smit-> System Storage Management (Physical & Logical Storage) -> File Systems-> Backup A File System, select the pre-backup file system, Enter confirmation, you can use the smit command SMIT VG-> Back Up A Volume Group, select the pre-backup VG,

转载请注明原文地址:https://www.9cbs.com/read-120480.html

New Post(0)