Distribute disk group (EMC array)

xiaoxiao2021-03-06  93

The current system status, you can see the address of the LPFC enable IP function:

# Ifconfig -alo0: flags = 1000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 bge0: flags = 1000843 mtu 1500 index 2 inet 172.16.33.70 netmask ffffff00 broadcast 172.16.33.255 ether 0: 3: ba: 3c: 2a: d lpfc0: flags = 1000842 mtu 65280 index 3 inet 172.16.33.70 netmask ffffff00 broadcast 172.16.33.255 ether 0: 0: C9: 3D: CF: D3

Assign a disk group to the host in the EMC. You can see a shared disk. If you install PowerPath, you can see the dual channel (this example does not have a PowerPath Client):

# FormatSearching for disks ... DONE

Available Disk Selections: 0. C0T0D0 / PCI @ 1C, 600000 / SCSI @ 2 / SD @ 0,0 1. C0T1D0 / PCI @ 1C, 600000 / SCSI @ 2 / SD @ 1,0 2. C2T0D0 / PCI @ 1D, 700000 / FIBRE-CHANNEL @ 1 / SD @ 0,0 3. C2T1D0 / PCI @ 1d, 700000 / Fibre-Channel @ 1 / SD @ 1,0Specify Disk (Enter ITS Number): 2Selecting C2T0D0 [Disk formatted]

转载请注明原文地址:https://www.9cbs.com/read-122604.html

New Post(0)