Emulex Lightpulse FC9002L Fiber Card Installation Log

xiaoxiao2021-03-06  86

Emulex Lightpulse FC9002L Fiber Card Installation Log

The driver on the CD is installed on Solaris9. After restarting, the system does not stop, and cannot be UP.

You can download new drivers to the official website.

# Tar xvf solaris-6.01c-1a.tarx EmlxApps300a8-Solaris.tar, 6850560 bytes, 13380 tape blocksx lpfc-6.01c-sparc.tar, 1848832 bytes, 3611 tape blocksx readme.first.txt, 953 bytes, 2 tape blocks # Lsemlxapps300a8-solaris.tar readme.

First.txt ssh-udjgs369lpfc-6.01c-sparc.tar Solaris-6.01c-1a.tar # tar xvf lpfc-6.01c-sparc.tarx LPFC.1, 0 Bytes, 0 Tape Blocksx LPFC.1 / Pkgmap, 1814 Bytes , 4. Tape Blocksx LPFC.1 / Pkginfo, 276 Bytes, 1 Tape Blocksx LPFC.1 / Install, 0 bytes, 0 Tape Blocksx LPFC.1 / Install / CopyRight, 480 Bytes, 1 Tape Blocksx LPFC.1 / Install / PostInstall, 9336 bytes, 19 tape blocksx lpfc.1 / install / postremove, 2848 bytes, 6 tape blocksx lpfc.1 / install / preremove, 1620 bytes, 4 tape blocksx lpfc.1 / install / request, 2378 bytes, 5 tape blocksx lpfc. 1 / Install / Space, 23 Bytes, 1 Tape Blocksx LPFC.1 / Reloc, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / etc, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / etc / system, 0 bytes , 0 TAPE BLOCKSX LPFC.1 / RELOC / KERNEL, 0 BYtes, 0 Tape Blocksx LPFC.1 / Reloc / kernel / DRV, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / kernel / DRV / LPFC, 592692 BYtes, 1158 Tape Blocksx LPFC.1 / Reloc / kernel / Drv / LPFC.CONF, 10863 BYtes, 22 Tape Blocksx LPFC.1 / Reloc / kernel / DRV / SD.CONF, 1185 BYtes, 3 Tape Blocksx LPFC.1 / RELO C / KERNEL / DRV / SPARCV9, 0 BYtes, 0 Tape Blocksx LPFC.1 / Reloc / Kernel / DRV / SPARCV9 / LPFC, 719064 BYtes, 1405 Tape Blocksx LPFC.1 / Reloc / USR, 0 Bytes, 0 Tape Blocksx LPFC. 1 / reloc / usr / include, 0 bytes, 0 Tape Blocksx LPFC.1 / Reloc / usr / include / fcdiag.h, 18051 BYtes, 36 Tape Blocksx LPFC.1 / Reloc / USR / LIB, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / usr / lib / libdfc.a, 43820 Bytes, 86 Tape Blocksx LPFC.1 / Reloc / usr / lib / libdfc.so, 42000 Bytes, 83 Tape Blocksx LPFC.1 / Reloc / USR / LIB / Sparcv9, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / USR / LIB / SPARCV9 / LIBDFC.A, 47936 BYtes, 94 Tape Blocksx LPFC.1 / Reloc / USR / LIB / SPARCV9 / LIBDFC.SO, 51248 BYtes, 101 Tape Blocksx LPFC.1 / Reloc / USR / Sbin, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / USR / SBIN / LPFC, 0 BYTES,

0 TAPE BLOCKSX LPFC.1 / RELOC / USR / SBIN / LPFC / CONVERT_PATH_LPFC, 2257 BYtes, 5 Tape Blocksx LPFC.1 / Reloc / USR / SBIN / LPFC / DFC, 1050 BYtes, 3 Tape Blocksx LPFC.1 / Reloc / USR SBIN / LPFC / DFC32, 118520 BYtes, 232 Tape Blocksx LPFC.1 / Reloc / USR / SBIN / LPFC / DFC64, 120944 BYtes, 237 Tape Blocksx LPFC.1 / Reloc / USR / SBIN / LPFC / RESETQDepth, 1027 BYtes, 3 Tape Blocksx LPFC.1 / Reloc / USR / Share, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / USR / Share / Man, 0 Bytes, 0 Tape Blocksx LPFC.1 / Reloc / USR / Share / Man / Man7d , 0 bytes, 0 Tape Blocksx LPFC.1 / Reloc / USR / Share / Man / Man7D / LPFC.7D, 30587 Bytes, 60 Tape Blocks # lsemlxApps300A8-Solaris.tar LPFC.1 Solaris-6.01C-1A.TARLPFC-6.01 C-sparc.tar readme.first.txt ssh-udjgs369 # pkgadd -d / tmpthe following packages Are Available: 1 LPFC.1 Emulex Lightpulse FC SCSI / IP HOST Bus Adapter Driver (Sun4u) Release 6.01C

Select Package (s) You wish to process (default: all) [?, ??, q]:

Processing package instance from

Emulex Lightpulse FC SCSI / IP Host Bus Adapter Driver (Sun4u) Release 6.01C

LPFC FC SCSI / IP DRIVER

Copyright (C) 2004, Emulex Corporation 3333 Susan Street, Costa Mesa, CA 92626

All rights reserved. This product and related documentation isprotected by copyright and distributed under licenses restrictingits use, copying, distribution and decompilation. No part of thisproduct or related documentation may be reproduced in any form byany means without prior written authorization of Emulex Corporationand its licensors, IF any.

CAUTION:. The lpfc driver will not work with any release of Solaris / SunOSearlier than 2.6 / 5.6 However, even for later releases, lpfc mayhave to be compiled specifically for that release of Solaris Thisversion of lpfc has been built under Solaris / SunOS for. Sun4u.rebuild Manual Pages Database for section 7D [Y, N ,?] Y

Use ip networking over fiber channel [y, n ,?] y

Network hostname (for first adapter) [?, Q] cluster2Using as the package base directory. ## Processing package information. ## Processing system information. 11 package pathnames are already properly installed. ## Verifying disk space requirements. # # Checking for conflicts with packages already installed.

The Following Files Aready Installed On The System and Are Beingused by Another Package: / usr / Share / Man / Man7d

Do you want to install the conflicting files [y, n,?, Q] y ## checking for setuid / setgid program.

.

Do you want to contact with the installation of [y, n ,?] y

Installing Emulex Lightpulse FC SCSI / IP HOST Bus Adapter Driver AS

## installing part 1 of 1. [Verifying Class ] /usr/share/man/man7d/lpfc.7d [verifying class ] /kernel/drv/lpfc/kernel/drv/lpfc.conf/kernel / DRV / SPARCV9 / LPFC [Verifying Class ] /usr/include/fcdiag.h/usr/lib/libdfc.a/usr/lib/libdfc.so/usr/lib/sparcv9/libdfc.a/uSR/ LIB / SPARCV9 / LIBDFC.SO / USR / SBIN / LPFC / CONVERT_PATH_LPFC / USR / SBIN / LPFC / DFC / USR / SBIN / LPFC / DFC32 / USR / SBIN / LPFC / DFC64 / USR / SBIN / LPFC / RESETQDEPTH [Verifying Class ] Modifying / etc / systemModifying /kernel/drv/sd.conf [verifying class ] ## Executing postinstall script.Updating /kernel/drv/lpfc.confUpdating / etc / system (moddir) Configuring / etc / Hostname.lpfc0 as cluster2catman -m // usr / share / man -w 7dthis May Take A While ... Driver LPFC Added to System.

************ Important: you must reboot the system to start this driver.scsi: if you are useless lpfc to access disks, be sure to check the configuration file of your scsi target driver (PRESUMABLY SD .conf) to ensure that the driver will probe for all of the targets / luns in your environment.NETWORK:. The first adapter IP network interface /etc/hostname.lpfc0 has been set up with the hostname cluster2 to configure additional Lightpulse adapters, simply create additional files /etc/hostname.lpfc[1-n] each containing the name of this host from the standpoint of that adapter's network.ALL: Examine the contents of /kernel/drv/lpfc.conf for driver-specific variables and BEHAVIOR. ************

Installation of WAS Successful.

Select package (s) you wish to process (default: all) [?, ??, q]: q *** important notice *** this machine must now be rebooted in Order TO Ensure Sane Operation. Execute Shutdown -y -i6 -g0 and wait for the "console login:" prompt.

转载请注明原文地址:https://www.9cbs.com/read-122606.html

New Post(0)