ADSL cat's default password

xiaoxiao2021-03-06  90

Digital / ASUS:

Username: ADSL Password: ADSL1234

Omnidirectional:

Username: root password: root

Putian:

Username: PUTIAN Password: 123456

E-TEK

Username: admin Password: 12345

Zyxel

Username: anonymous password: 1234

North electricity

Username: anonymous password: 12345

Large

Username: admin password: admin

Datang

Username: admin Password: 1234

Sweet

Username: root password: root

Username: User Password: User

ZTE

Username: ADSL Password: ADSL831

(ZTE's password is ADSL in front of ADSL, the back is model, such as ZTE 831, password is ADSL831)

Everyone uses ADSL's friends, after getting ADSL cat, you should modify the default password in time to avoid being used.

Emma 701g

192.168.101.1 192.168.0.1

Username: admin password: admin

Username: SZIM Password: SZIM

Emma 701H

192.168.1.1 10.0.0.2

Username: admin Password: EPICROUROUTER

Zhanda 2110EH ROUTER

192.168.10.1

Username: User Password: Password

Username: root password: Grouter

Digital / ASUS:

Username: ADSL Password: ADSL1234

Omnidirectional:

Username: root password: root

Putian:

Username: admin Password: Dare

E-TEK

Username: admin Password: 12345

Zyxel

Username: anonymous password: 1234

North electricity

Username: anonymous password: 12345

Large

Username: admin password: admin

Datang

Username: admin Password: 1234

Sweet

Username: root password: root

Username: User Password: User

ZTE

Username: adsl password: adsl831 (ZTE's password is ADSL, the back is model, such as ZTE 831, the password is ADSL831)

1, the whole-to-QL1680 IP address 10.0.0.2, Username: admin, password: QXComm1680, administrator password: QxCommsupport. Omnidirectional

QL1880 IP address 192.168.1.1, username: root, password: root full-to-want QL1688 IP address 10.0.0.2, user name is admin; password is QXComm1688

2, TP-LINK TD-8800 in IE input 192.168.1.1, account name admin, password admin

3, "Senses Zyxel 642 running Telnet 192.168.1.1 password 1234

4, ECOM ED-802EG in IE input 192.168.1.1, username and password are root

5, Shenzhou Digital 6010ra, in IE input 192.168.1.1 User named ADSL, password is ADSL1234

6. The initial IP of Huawei Smartax MT800 is 192.168.1.1, the username and password are admin, and there are two ways to restore the default configuration. One is the RESET key behind the modem, the other is Save & Reboot in the configuration menu. Select the restore default configuration. 7, Itek: IP: 192.168.1.1 Username: Supervisor Password: 12345

8, ASUS IP: 192.168.1.1 User Name: ADSL Password: ADSL1234

9. Alcaters 192.168.1.1 generally no password

10, the same dimension DSL699E 192.168.1.1 User Name: root Password: root

11, OA DB102 192.168.1.1 User Name: admin Password: Dare Advanced Settings: //192.168.1.1/doc/index1.htm

12, WST RT1080 192.168.0.1 UserName: root password: root

13, WST's Art18CX 10.0.0.2 Username: admin Password: conexant usrname: user password: password

14, Zhanda v3.2 root root v5.4 root grouter

15, Pande Admin conlevian

16, Dongxin EA700 192.168.1.1 User Name: Air password: Password

17, Broadmax's HSA300A 192.168.0.1 Username: Broadmax Password: Broadmax

18, Changhong CH-500E 192.168.1.1 Username: root password: root

19, Chongqing Putian CP ADSL03 192.168.1.1 UserName: root password: root

20, Taiwan breakthrough EA110 RS232: 38400 192.168.7.1 UserName: DSL PSW: DSL

21, ETEK-TD ADSL_T07L006.0 192.168.1.1 User Name: Supervisor

PASSWORD: 12345 Solution to the Password: Use the super terminal XMODEM mode to override VxWorks.dlf, password recovery to: 12345 22, GVC DSL-802E / R3A 10.0.0.2 UserName: admin Password: EPICROURNAME: User Password: Password

23, Komai Yi Tong KM300A-1 192.168.1.1 UserName: Password: Password KM300A-G 192.168.1.1 UserName: root password: root Cai Yong KM300A-A 192.168.1.1 UserName: root or admin Password: 123456

24, Sunrise's SR-DSL-AE 192.168.1.1 UserName: admin Password: 0000 Sunrise DSL-802E_R3A 10.0.0.2 Username: admin Password: EPICROCROUR Username: user password: password

25. UTSTAR's UT-300R 192.168.1.1 UserName: root or admin Password: Utstar These are some of the ADSL-fashionable factory default initial IP, username, and password, it is necessary to debug these scheduled things. Generally commissioning these three ways, one is the most common web method, that is, fill in the filling IP in the browser, such as QX1680, is 10.0.0.2 on the browser address bar, after the prompt bar, enter User name admin, password QXCommsupport, you can set the interface. The most common and simplest is this method. The second method is to use Telnet's methods, Telnet IP, such as early disabled 642, method Telnet 192.168.1.1, and then enter the password 1234, you can enter the full-English character interface. The third method is to enter the configuration interface with the configurable configuration procedure with the vendor, such as Cyberlink 6307 / 6309kg which uses DSLCOM.exe in the CybrLink 6307 / 6309kg belt, factory default value: Route IP address: 1 92.168. 1.1 Password: STM, because this method does not have the first two ways, so the current low-end products are less adopted. The debugging of the vast majority of products is to first connect the on-strand of twisted pair of products, set the IP of the unit to the same network segment, and then configure it, if the start is changed. IP or password, most of which can restore the factory default value by reset. The most common way is also the most useful way to set up the reset key, then power up, and then take a small period of time to recover the CT-500 192.168.1.1 root / 1234526. ZTE ADSL841 default IP: 192.168.1.1, username: admin, password: private

Chengdu Tianyi User Name: admin Password: EPICROUROUTER

Shanghai Zhongda User Name: (Free) Password: 12345

Everyone uses ADSL's friends, after getting ADSL cat, you should modify the default password in time to avoid being used.

*********************************************************** **********************************

ADSL MODEM initial address and username password Daquan

To debug these schedule, you must first set the IP address of the NIC to the same network segment as these ADSLs.

1, the full-to-IP address 10.0.0.2 in the address bar of the IE browser, the username is admin factory default value: password is QXComm1680, the administrator password is Qxcommsupport

2, the full-to-the-way QL1880 in the address bar of the IE browser 192.168.1.1, the username is ROOT factory default: password is root

3, all-to-the-IP address 10.0.0.2 in the address bar of the IE browser, the user name is admin; the factory default value: password is QXComm1688

4, Cyberlink 6307 / 6309kg It uses DSLCOM.exe in Cyberlink6307 / 6309kg, factory default value: Route IP address: 192.168.1.1 Password: STM

5, TP-LINK TD-8800 in IE input 192.168.1.1, account name admin, password admin.

6. Sentence Zyxel 642 runs the Telnet 192.168.1.1 password 1234, always pressing the RESET reset button behind the body and turns on, keeping a factory default value for tens of seconds. 7, ECOM ED-802EG In IE input 192.168.1.1, username and password are root

8, China Digital 6010RA, in IE input 192.168.1.1 User named ADSL, password is ADSL1234

9. The initial IP of Huawei Smartax MT800 is 192.168.1.1, the username and password are admin, and there are two ways to restore the default configuration. One is three consecutive reset keys, the other is the Save & Reboot in the configuration menu. Select the restore default configuration.

Itek

Http://192.168.1.1/

Username: Supervisor

Password: 12345

ASUS

Http://192.168.1.1/

Username: ADSL

Password: ADSL1234

Alcate

Http://192.168.1.1/

Generally there is no password

Tongyi DSL699E

Http://192.168.1.1/

Username: root

Password: root

Overia DB102

Http://192.168.1.1/

Username: admin

Password: Dare

Advanced setting interface: http://192.168.1.1/doc/index1.htm

WST RT1080

Http://192.168.0.1/

Username: root

PASSWORD: root

WST's Art18cx

http://10.0.0.2/

Username: admin: admin

PASSWORD: CONEXANT

Username: User

Password: Assword

Full-to-want QXComm1688

Http://192.168.1.1/

High-end settings passwords are: qxcommsuport

Ride to QXComm1680

Http://192.168.1.1/

The password to log in to ADSL is: QxComm1680

Zhida

V3.2 root

root

V5.4 root

Grouter

Panthe

admin

CONEXANT

Dongxin EA700

Http://192.168.1.1/

Username: Empty

Password: Password

Broadmax's HSA300A

Http://192.168.0.1/

Username: Broadmax

Password: Broadmax

Changhong CH-500E

Http://192.168.1.1/

Username: root

PASSWORD: root

Chongqing Putian CP ADSL03

Http://192.168.1.1/

Username: root

PASSWORD: root

Taiwan breakthrough EA110

RS232: 38400

Http://192.168.7.1/

Username sl

PSW SL

ETEK-TD ADSL_T07L006.0

Http://192.168.1.1/

User name: supervisor

PASSWORD: 12345

Forgot your password solution:

Have override vxworks.dlf using the XMODEM mode of the super terminal, password recovery: 12345

GVC DSL-802E / R3A

http://10.0.0.2/

Username: admin: admin

Password: EPICROUROUTER

Username: User

Password Assword

KM300A-1

Http://192.168.1.1/

Username:

Password Assword

KM300A-G

Http://192.168.1.1/Username :root

PASSWORD: root

KM300A-A

Http://192.168.1.1/

Username: root or admin

PASSWORD: 123456

Sunrise's SR-DSL-AE

Http://192.168.1.1/

Username: admin: admin

PASSWORD: 0000

Sunrise DSL-802E_R3A

http://10.0.0.2/

Username: admin: admin

Password: EPICROUROUTER

Username: User

Password Assword

UTSTAR UT-300R

Http://192.168.1.1/

Username: root or admin

Password: Utstar

These are all the default initial IPs, usernames, and passwords of ADSL federate, and they must be able to know when they are trying to debug.

Generally commissioning these three ways, one is the most common web method, that is, fill in the filling IP in the browser, such as QX1680, is 10.0.0.2 on the browser address bar, after the prompt bar, enter User name admin, password QXCommsupport, you can set the interface. The most common and simplest is this method.

The second method is to use Telnet's method, Telnet IP, such as early sign 642, method Telnet

192.168.1.1, then enter the password 1234, you can enter the full-English character interface.

The third method is to enter the configuration interface with the configurable configuration program that manufacturers, such as Cyberlink 6307 / 6309KG

It uses DSLCOM.exe in Cybrlink 6307 / 6309kg,

Default value: Route IP address: 1 92.168.1.1 Password:

STM, because this method is not convenient for the first two methods, so the current low-end product is less adopted.

The debugging of the vast majority of products is to first connect the on-strand of twisted pair of products, set the IP of the unit to the same network segment, and then configure it, if the start is changed. IP or password, most of which can restore the factory default value by reset. The most common way is also the most useful way to put the reset key after it is, and then power up, and you can restore the factory defaults after a short period of time.

转载请注明原文地址:https://www.9cbs.com/read-123414.html

New Post(0)