Dictionary of installing Stardict:
[root @ localhost root] # CD / MNT / WINF / Linux
[root @ localhost Linux] # rpm -ivh stardict-treedict-infobrowse-zh_cn-2.4.2-1.noarch.rpm
[root @ localhost linux] # ls -a
[root @ localhost linux] # tar -xjvf stardict-langdao-CE-GB-2.4.2.tar.bz2
[root @ localhost Linux] # tar -xjvf stardict-oxford-GB-2.4.2.tar.bz2
[root @ localhost linux] # ls -a
[root @ localhost Linux] # mv stardict-oxford-GB-2.4.2 / usr / share / stardict / DIC [root @ localhost Linux] # tar -xjvf stardict-longdao-CE-GB-2.4.2.tar.bz2
[root @ localhost linux] # tar -xjvf stardict-language-ce-gb-2.4.2.tar.bz2 [root @ localhost Linux] # mv stardict-langdao-CE-GB-2.4.2 / usr / share / stardict / DIC [root @ localhost linux] # ls -a [root @ localhost linux] # gedit [root @ localhost linux] # rpm -ivh wyabdcrealpeopletts-1.0-1.noarch.rpm [root @ localhost linux] #
Let the FC2 Vocational System Setting -> Detecting the Sound Card to ensure that KMix is installed, if not installed: # system-config-packages --ioDir = / mnt / winf / linux / installation KMix # kmixinput-> Advanced, stop Several IEC958 and External A ... Installation XMMS: #RPM-E XMMS (uninstall existing XMMS) #RPM -IVH XMMS-1.2.8-1.i386.rpm # xmms Select an MP3 file, play, you should hear the sound!
Install Opera7.5
[root @ localhost linux] # tar -xjvf Opera75.tar.bz2
[root @ localhost linux] # ls -a
7.5p6.zip
Opera-7.50-20040511.1-Static-qt.i386-en.rpmopera75.tar.bz2opera.sn // serial number
[root @ localhost Linux] # rpm -ivh Opera-7.50-20040511.1-static-qt.i386-en.rpmpRepReparing ... ################################################################################################################################################################################################################################## ############## [100%] 1: Opera ####################### ############## [100%] [root @ localhost linux] # GEDIT OPERA.SN
[root @ localhost linux] # unzip -d. 7.5p6.ziparch: 7.5p6.zip infilating: ./lngcode.txt inflating: ./search.ini inflaning: ./zh-cn.lng // Chinese language pack
[root @ localhost Linux] # gedit lngcode.txt [root @ localhost linux] # mv zh-cn.lng / usr / share / opera / locale / [root @ localhost linux] #
Install FlashPlayer
[Root @ localhost linux] # tar zxvf install_flash_player_7_linux.tar.gz [root @ localhost linux] # cd install_flash_player_7_linux [root @ localhost install_flash_player_7_linux] # ls -a. Flashplayer-installer libflashplayer.so Readme.txt .. flashplayer.xpt Readme. HTM
Put the following two files to /usr/lib/mozilla-1.6/pluginslibflashplayer.soflashplayer.xpt
Font beautification: Author: yellow leaves http://hylinux.3322.org/http://www.linuxsir.org/bbs/showthread.php?s=&threadid=110758 I have been to use as guidelines on the most, so it Just add a few fonts to the system. First declare that the font package here doesn't worry, but the original brother is made. I remember that the font package when beautifying Red Hat 9, but I have been using it now. Let's talk about the steps:
1. Establish the following directory mkdir / usr / system download the following font package: http://hylinux.3322.org/software/font.tar.bz2http: //hylinux.3322.org/software/redfonts.tar.bz
Will two packages in the directory / usr / system, there will be two directories: Fonts and Rofonts. 2, download this font to formulate files from below, put in / etc / fonts, please do a good job first: http://hylinux.3322.org/software/fonts.conf
3, separate the two GTK profiles into / etc / gtk and /etc/gtk-2.0. http://hylinux.3322.org/software/gtkrc.zh_cn is placed in / etc / gtk. Http://hylinux.3322.org/software/gtkrc is put in /etc/gtk-2.0 4, add font path to /etc/x11/xorg.conf. FontPath "/ usr / system / fonts" fontpath "/ usr / system / rofonts" Do not join the XTT module. If you join, you will go out. 5, restart X, all fonts in GNOME choose TaHoma, the same in KDE. To this beautification is completed.
Special attention: Please make a backup before modifying any system files. Once an error cannot start XWindow, you can recover from the command line.
Modify directory permissions:
[root @ localhost home] # cd test [root @ localhost test] # ls -l total amount 4-rwxrwrwx 1 Eye Eye 30 August 24 16:58 Test.txt [root @ localhost test] # cd .. [root @ Localhost Home] # chmod -rwx test / * [root @ localhost home] # cd test [root @ localhost test] # ls -l total dosage 4 ----- W - W- 1 Eye Eye 30 August 24 16 : 58 Test.txt [root @ localhost test] # chmod 777 ../test/*[root@localhost test] # ls -l total dosage 4-rwxrwxrwx 1 Eye Eye 30 August 24 16:58 Test.txt [root @LocalHost Test] # Install Canon S200SPX Printer Driver:
Gimp-print-4.2.6 http://gimp-print.sourceforge.net/http://www.linuxprinting.org/show_printer.cgi?recnum=canon-s200s200-gimp-print.ppd.gz and S200-GIMP -Print-ijs.ppd.gzhttp: //karstenfestag.gmxhome.de/canons200.html
[root @ localhost root] # CD / home / eye / downloadload
[root @ localhost download] # ls -a. gimp-print-4.2.6.tar.gz shici.pdf .. print-canon.c.gz turboprint-1.90-1.i386.25.diff S200 -gimp-print-ijs.ppd.gz users-guide.pdfgimp-print-4.2.6 s200-gimp-print.ppd.gz
[root @ localhost download] # tar gimp-print-4.2.6.tar.gz [root @ localhost download] # cd gimp-print-4.2.6 [root @ localhost gimp-print-4.2.6] # ./configure [root @ localhost gimp-print-4.2.6] # make [root @ localhost gimp-print-4.2.6] # make install will s200-gimp-print.ppd.gz and s200-gimp-print-ijs.ppd. GZ two files to / usr / share / cups / model / down, or create a new Canon directory to open your browser: http: // localhost: 631 / addprintername: s200location: / dev / usb / lp0 (according to the printer The USB interface decision decision) The next setting is simple ...