1344 No more memory is used to update security information.
1345 The specified attribute is invalid, or the specified attribute is not compatible with the properties of the entire group.
1346 Or no mimic levels of the application are provided, or the equivalent level provided is ineffective.
1347 Unable to open anonymity security symbols.
1348 The requested verification information category is invalid.
1349 This type of symbol cannot be used in a tried.
1350 Unable to run safe operation on an object without relevant security.
1351 Failure to read configuration information from the domain controller, or because the machine is not available, or the access is rejected.
1352 Security Account Manager (SAM) or Local Security Authority (LSA) server status is not correct, so security operation cannot be run.
The 1353 domain is in the wrong state of the security operation.
1354 This action can only be performed in the domain's primary domain controller.
1355 The specified domain does not exist or contact.
1356 The specified domain already exists.
1357 Attempts to exceed the limit of each server domain.
1358 The requested operation cannot be completed due to severe media errors or data structures of the disk.
1359 Internal error occurred.
1360 The generic access type is included in the access mask, which is mapped to non-universal types.
1361 Format of security descriptor (absolute or autocorrelation).
1362 The operation requested only allows you to log in. This calling process is not recorded as a login process.
1363 Unable to start a new login session with the identifier already used.
1364 The confirmation packet specified is unknown.
1365 The status of the login session is inconsistent with the operation of the request.
1366 The login session identifier is in use.
1367 Login Request contains an invalid login type value.
1368 The pipe cannot be simulated before using the named pipe reading data.
1369 Registering the transaction status of the form is not compatible with the requested operation.
1370 burst internal security database fault.
1371 Unable to run this operation under internal accounts.
1372 Unable to run this operation in the internal specific group.
1373 Unable to run this operation in the internal specific user.
1374 Because the group is currently the main group of users, users cannot be deleted from this group.
1375 This symbol has been used as a primary symbol.
1376 The local group specified does not exist.
1377 The specified account name is not a member of the local group.
1378 The account name specified is already a member of the local group.
1379 The designated local group already exists.
1380 Login Failure: The user has not been awarded the required registration type on this computer.
1381 Over the maximum confidential limit that can be stored in a single system.
1382 The length of confidentiality exceeds the maximum allowable value.
1383 Local Security Authorized Database Contains an inconsistency in the interior.
1384 When logging in, the user's security context accumulate too much security identifier.
1385 Login Failure: The user has not been awarded the required registration type on this computer.
1386 The password with cross-encrypted password must change the user password.
1387 members do not exist, so they cannot be added to local groups or remove it from them.
1388 new member's account type is incorrect, so it cannot be added to the local group.
1389 The specified security identifier is too much.
1390 The password encrypted by the cross-encrypted password must change the user password.
1391 Indicates that the ACL has no components that can be inherited.
1392 File or directory has been damaged and data cannot be read.
The 1393 disk structure is damaged and data cannot be read.
1394 The specified login session has no user session key.
1395 The service that is accessing allows a specific number of connections. Since the number of connections has reached the number of service acceptable, new service connections cannot be created.
1396 Login Failure: The name of the target account is incorrect.
1397 Mutual authentication failed. The server expires in the domain controller.
1398 There is a time difference between the client and the server.
The 1400 window handle is invalid.
1401 menu handle is invalid.
1402 The cursor handle is invalid.
The handle of the 1403 acceleration key table is invalid.
1404 The plug-in handle is invalid.
1405 Multiple Window Position Structure Handle is invalid.
1406 Unable to create the uppermost sub-window.
1407 can't find the window class.
1408 Window is invalid; belongs to other threads.
1409 Already registered hotkey.
The 1410 class already exists. The 1411 class does not exist.
The 1412 window is still open.
1413 Index is invalid.
1414 Icon handle is invalid.
1415 Using a private dialog window word.
1416 Can't find the list box identifier.
1417 Can't find any wildcard.
1418 The thread did not open the clipboard.
1419 The hotkey has not been registered.
1420 This window is not a valid dialog window.
1421 Can't find the control identifier.
1422 Since there is no editing control, the message of the combo box is invalid.
1423 Window is not a combo box.
1424 Height must be less than 256.
1425 Device Context (DC) handle is invalid.
1426 Mounting process type is invalid.
The 1427 hook process is invalid.
1428 Cannot set non-local mounts without module handle.
1429 can only set the hook process globally.
1430 The diary is installed.
1431 No hook process is installed.
1432 The message of the radio list box is invalid.
1433 LB_SETCOUNT Sends to the list of events.
1434 This list box does not support tab.
1435 Unable to destroy the objects created by other threads.
The 1436 sub-window cannot have a menu.
The 1437 window has no system menu.
1438 Message box is invalid.
The parameters of the 1439 system range (SPI_ *) are invalid.
1440 The screen has been locked.
1441 All window handles in multiple windows must have the same parent window.
The 1442 window is not a child window.
1443 GW_ * command is invalid.
1444 The thread identifier is invalid.
1445 Unable to handle messages for non-multi-document interface (MDI) windows.
1446 The pop-up menu is activated.
The 1447 window has no scroll bar.
The 1448 rolling strip range cannot be greater than Maxlong.
1449 Unable to display or close the window in a specified manner.
1450 system resources are insufficient and cannot complete the requested service.
1451 The system resources are insufficient, and the requested service cannot be completed.
1452 Insufficient system resources, unable to complete the requested service.
1453 Insufficient quota, unable to complete the requested service.
1454 Insufficient quota, unable to complete the requested service.
1455 Page Switching file is too small and cannot be completed.
1456 can't find a menu item.
1457 Keyboard layout handle is invalid.
1458 Do not allow hook types.
1459 This operation requires an interactive window workstation.
1460 This operation returns due to timeout time.
1461 Invalid monitor handle.
The 1500 event log file is corrupt.
1501 Unable to open the event log file, so the event log service cannot be started.
1502 Event log files are full.
1503 Event log files have changed between two read operations.
1601 Unable to access Windows installation services. Please contact technical support staff to confirm that Windows installation services are registered correctly.
1602 Users have canceled the installation.
A serious mistake occurred during 1603 installation.
1604 Installation has been suspended, not completed.
1605 This action is only valid for the currently installed product.
1606 function ID is not registered.
1607 component ID is not registered.
1608 Unknown attributes.
The 1609 handle is in an incorrect state.
1610 The configuration data of this product has been damaged. Please contact technical support staff.
1611 component restrictions do not exist.
1612 The source of this product cannot be used. Please verify that the source exists and you can access it.
1613 Windows Installation Service Unable to install this installer package. You must install Windows Service Park with a new version of Windows installation services.
1614 The product has been uninstalled.
1615 SQL query syntax is incorrect or not supported.
1616 The record field does not exist.
1617 The device has been deleted.
1618 is conducting another installation operation. Please complete the action before you continue this installation.
1619 Failed to open this installation package. Please verify that the package exists and you can access; or contact your application vendor to verify that this is a valid Windows installation package.
1620 Failed to open this installer package. Please contact your app provider to verify that this is a valid Windows installation package. 1621 There is an error when launching a Windows installation service user interface. Please contact technical support staff.
1622 An error occurred while opening the installation log file. Please verify that the specified log file location exists and can be written.
1623 The language installed package is not subject to system support.
1624 An error occurred during the application. Please verify that the specified transformation path is valid.
1625 system strategy For prohibiting this installation. Please contact your system administrator.
1626 Unable to perform functions.
1627 During execution, the function has a problem.
1628 Specifies an invalid or unknown form.
1629 The data type provided is wrong.
1630 This type of data is not supported.
1631 Windows Installation Services failed to start. Please contact technical support staff.
The 1632 temporary folder is full or cannot be used. Please verify that the temporary folder exists and can be written.
1633 This processor type does not support this installer package. Please contact your product supplier.
1634 Components are not used on this computer.
1635 Unable to open the patch package. Please verify that the patch package exists, you can access; or contact your application vendor to verify that this is a valid Windows installation patch package.
1636 Unable to open the patch package. Please contact your app provider to verify that this is a valid Windows installation patch package.
1637 Windows Installation Service Unable to process this patch package. You must install Windows Service Pack with a new version of Windows installation services.
1638 Another version of this product is installed. This version of the installation cannot continue. To configure or delete an existing version of this product, use Add / Remove Programs on the Control Panel.
1639 Invalid command line parameters. For detailed command line help, please refer to the SDK of the Windows installation service.
1640 During the Terminal Services Remote Session, only administrators have access, delete, or configure server software. If you want to install or configure software on the server, please contact the network administrator.
1641 The operation requested has been successfully completed. To take effect, the system must be restarted.
1642 Windows Installation Services Unable to install upgrade patch, because the upgraded program is lost, or the upgrade patch will update other versions of this program. Please confirm that the program to be upgraded is on your computer and your upgrade patch is correct.
1700 string binding is invalid.
1701 Binding the type error of the handle.
1702 The binding handle is invalid.
1703 Does not support the RPC protocol order.
1704 RPC protocol sequence invalid.
1705 String Global Unique Identifier (UUID) is invalid.
1706 The format of the end point is invalid.
1707 Network address is invalid.
1708 did not find the end.
1709 timeout setting value is invalid.
1710 Can't find the world's unique identifier (UUID).
1711 The global unique identifier (UUID) of the object has been registered.
1712 This type of global unique identifier (UUID) has been registered.
1713 RPC server is listening.
1714 has not registered the protocol order.
1715 The RPC server is not in the listening state.
1716 The type of manager is unknown.
The 1717 interface is unknown.
1718 did not bind.
1719 There is no protocol sequence.
1720 Unable to create endpoints.
The 1721 resource cannot be completed.
1722 RPC server cannot be used.
1723 The RPC server is too busy and cannot complete this operation.
1724 Network option is invalid.
1725 Remote process calls in this thread do not exist.
1726 Remote process call failed.
1727 Remote procedure call failed and cannot be executed.
1728 Remote Process Call (RPC)
1747 Authentication Service Unknown.
1748 identity verification level unknown.
The 1749 security descriptor is invalid.
1750 authentication service is unknown.
1751 The project is invalid.
1752 The endpoint of the server cannot perform this operation.
1753 The end of the map is not available for more endpoints.
1754 did not export any interface.
1755 The name is incomplete.
The 1756 version option is invalid.
1757 No other member.
1758 can export all content.
1759 Didn't find the interface.
The 1760 project already exists.
1761 The project cannot be found.
1762 Name Service is not available.
The 1763 network address set is invalid.
1764 does not support the requested operation.
1765 There is no security descriptor for imitation.
1766 Remote Process Call (RPC) An internal error.
1767 RPC server attempts to make unparalleled zero operations.
1768 RPC server appears to add an error.
1769 The floating point operation in the RPC server is caused by zero.
The 1770 RPC server generates a floating point underflow error.
1771 The RPC server produces a floating point overflow.
1772 The list of RPC servers that can be used for automatic handles is running.
1773 Unable to open the character conversion table file.
1774 The file containing the character conversion table is less than 512 bytes.
1775 In remote procedure call, the client transmits an empty descriptor handle to the host.
1777 Description of the description in the remote process call changes.
1778 The binding handle sent to the remote procedure does not match.
1779 placeholder program cannot obtain a handle called by a remote process.
1780 Send an empty reference pointer to the placeholder program.
The 1781 list is outside the range.
The number of 1782 bytes is too small.
The 1783 placeholder program receives the error data.
1784 The user buffer provided is invalid for the operation of the application.
1785 Unable to identify disk media. It may not format it.
1786 workstation has no trust password.
1787 Computer account without this workstation trust in the security database on the server.
1788 Establish a failed relationship between the main domain and the trusted area.
1789 Establishing a workstation and the trust relationship between the main domain failed.
1790 Network login failed.
1791 The remote process call has been conducted during the implementation of the thread.
1792 Attempt to log in to the network, but the network login service has not started.
1793 User Account has expired.
1794 Redirects the program is being used and cannot be uninstalled.
1795 The specified printer driver is installed.
1796 The specified port is unknown.
The 1797 printer driver is unknown.
1798 Print handler Unknown.
1799 The specified separator file is invalid.
The priority specified by 1800 is invalid.
1801 The printer name is invalid.
The 1802 printer already exists.
1803 The printer command is invalid.
1804 The specified data type is invalid.
1805 The designated environment is invalid.
1806 No other binding.
1807 The account used is a trust account across the network. Use global user accounts or local user accounts to access this server.
1808 The account used is a computer account. Please use the global user account or a local user account to access the server.
1809 The account used is a server trust account. Please use the global user account or a local user account to access the server.
1810 The designated domain name or security identifier is inconsistent with the trust information of the domain.
1811 The server is in use and cannot be uninstalled.
1812 The image file specified does not contain the resource section.
1813 Can't find the specified resource type in the image file.
1814 Find the specified resource name in the image file.
1815 Can't find the specified resource language ID in the image file.
1816 The available quota is insufficient and the command cannot be executed.
1817 There is no registered interface.
1818 Remote process call is canceled.
1819 The binding handle does not contain all the information you need.
1820 The communication failed during the remote call.
The identity verification level required 1821 is not supported.
1822 The main name is not registered.
1823 The specified error is not a valid Windows RPC error code.
1824 The UUID that has been assigned only on this machine.
1825 produces specific secure package errors.
1826 There is no cancellation thread.
1827 The operation when encoding / decoding processing is invalid.
The 1828 version of the serialization package is not compatible.
The version of the 1829 RPC placeholder program is not compatible.
The 1830 RPC pipeline object is invalid or damaged.
1831 Attempts to operate on the RPC pipe object.
1832 The RPC pipeline that is not supported.
1898 Cannot find a member of the group.
1899 Unable to create endpoint mapping database entries.
The Global Identifier (UUID) of the 1900 object is empty. 1901 The time specified is invalid.
1902 The specified form name is invalid.
1903 The specified form is invalid.
1904 The specified printer handle is waiting for processing
1905 The specified printer has been deleted.
1906 The status of the printer is invalid.
1907 The user must change its password first before logging in.
1908 can't find the domain controller of this domain.
1909 Reference account is currently locked, may not log in.
1910 There is no discovery of the specified object exporter.
1911 No specified object is found.
1912 No specified object parser is found.
1913 Some of the data to be sent is still stayed in the request buffer.
1914 Invalid asynchronous remote procedure calling handle.
1915 This operation is incorrect.
The 1916 RPC pipeline has been closed.
1917 RPC calls are completed before all of the pipes are processed.
1918 There is no other available data from the RPC pipe.
1919 This machine does not have a site name available.
1920 The system cannot access this file.
The 1921 system cannot resolve the file name.
The 1922 project is not the type of desired.
1923 Unable to export all objects of UUID to the specified item.
1924 Unable to export the interface to the specified item.
1925 Unable to add the specified profile item.
1926 Unable to add the specified profile element.
1927 Unable to delete the specified profile element.
1928 Unable to add group elements.
1929 Unable to delete group elements.
2000 pixel format is invalid.
2001 The specified driver is invalid.
2002 The window style or class attribute of this operation is invalid.
2003 does not support the requested metafile operation.
2004 does not support request conversion operations.
2005 Do not support the requested clip operation.
The color management module specified in 2010 is invalid.
The color file configuration specified in 2011 is invalid.
2012 can't find the specified ID.
The identification required by 2013 does not exist.
The identity specified in 2014 already exists.
Color file configuration specified in 2015 is not related to any device.
2016 can't find the specified color file configuration.
The color space specified in 2017 is invalid.
2018 Image Color Management is not enabled.
2019 has an error when deleting the color conversion.
2020 The specified color conversion is invalid.
2021 The specified conversion does not match the color space of the bitmap.
2022 The specified name color index does not exist in the configuration file.
The 2108 network connection has been successful, but it is necessary to prompt the user to enter a password different from the original designated.
2202 The username specified is invalid.
2250 Network connection does not exist.
2401 In this network, there is an open file or unprocessed request.
2402 The connection is still present.
2404 The device is being used by the activity process and cannot be disconnected.
3000 Specified print monitor is unknown.
3001 The specified printer driver is being used.
3002 Can't find a spool file.
3003 No StartDocprinter call is issued.
3004 has not yet issued AddJOB calls.
3005 The specified print handler is already installed.
3006 The specified print monitor has been installed.
3007 The specified print monitor does not have the required function.
3008 The specified printer monitor is in use.
3009 This operation request is not allowed when the printer has a job row queue.
The operation of the 3010 request is successful. Only restarting the system, the changes will take effect.
The operation of the 3011 request is successful. Only by restarting the service, the changes will take effect.
3012 can't find the printer.
4000 Wins encountered an execution error when processing a command.
4001 Unable to delete local Wins.
4002 The introduction from the file failed.
4003 Backup failed. Come before the complete backup?
4004 Backup failed. Please check the target directory of the backup database.
4005 Name does not exist in the WINS database.
4006 Do not allow a copy of the unconfigured portion.
4100 DHCP Customers get an IP address that has been used online. The local interface will be disabled until the DHCP customer gets a new address.
4200 WMI data provider cannot recognize whether the GUID is valid.
4201 WMI data provider cannot identify if the instance name is valid. 4202 WMI Data Provider Unrecognizable data item identifier is valid.
4203 Unable to complete WMI request, please try again.
4204 Can't find the WMI data provider.
4205 WMI data provider references an unregistered instance group.
4206 WMI data block or event notification is enabled.
4207 WMI data block is no longer available.
4208 WMI data services cannot be used.
4209 WMI data provider cannot complete the request.
4210 WMI MOF information is invalid.
4211 WMI registration information is invalid.
4212 WMI data block or event notification has been disabled.
4213 WMI data items or data blocks are read-only.
4214 WMI data items or data blocks cannot be changed.
6118 The list of servers of the working group is currently unavailable.
6200 To run normally, the configuration of the task planning program service must be run in the system account. Separate tasks can be configured to run in other accounts.
7001 The specified session name is invalid.
7002 The specified protocol driver is invalid.
7003 The specified protocol driver cannot be found on the system path.
7004 The specified terminal connection driver cannot be found on the system path.
7005 You cannot create a registration key for event logs for this session.
7006 The same name is already existing in the system.
7007 Suspend in a session.
7008 There is no output buffer available.
7009 Can't find the Modem.inf file.
7010 Did not find the modem name in Modem.inf.
The 7011 modem does not accept the instruction sent to it. Verify that the modem of the configuration is matched to the connected modem.
The 7012 modem does not respond to the instruction sent to it. Verify that the modem is correct and opens the power switch.
7013 Due to disconnection, carrier detection failure or carrier stop.
7014 did not find dial tone during the required time. Make sure the phone line connection is correct and can be used.
7015 The bus line signal is detected when the remote site is called.
7016 The sound is detected on the remote site when the callback is called.
7017 Transport driver error
7022 Can't find the specified session.
7023 The specified session name is already in use.
7024 Since the terminal connection is currently being busy with a connection, disconnection, reset, or delete operation, the request cannot be completed.
7025 Attempts to connect to its video mode is not received by current customer support.
7035 Application Try to start DOS graphics mode. Do not support DOS graphics mode.
7037 Your interactive login privilege has been disabled. Please contact your administrator.
7038 This request can only be performed on the system console. This is usually a result of a driver or system DLL requires direct console access.
7040 Customers have failed to respond to server connection messages.
7041 Does not support disconnecting console sessions.
7042 Does not support re-connect a disconnected session to the console.
7044 Remote control of another session request is rejected.
7045 Refused Request Session Access.
7049 The specified terminal connection driver is invalid.
7050 cannot be remotely controlled
