PHOTO skills, I want to learn PS to see

xiaoxiao2021-03-06  110

Quick open files

Double click on the background of Photoshop (the default is a gray display area) to open the browse window of the selection file.

2. Change the color of the canvas free

Select the paint bucket tool and hold down Shift Click on the edge of the canvas to set the background color to the currently selected foreground color. If you want to restore the default color, set the outlight of 25% grayscale

(R192, G192, B192) Press and hold the Shift Click on the edge of the canvas.

3. Select the shortcut key of the tool

You can quickly select a tool in the toolbox by pressing the shortcut, and the letter shortcuts of each tool are as follows:

Selection box -M mobile-V set -L magic stick -w

Spray gun -J brush -B pencil-N rubber stamp-S

History Brush -Y Eraser - E Blurred - R Dilling - O

Pen-P text-T metrics -U gradient-g

Paint Barrel-K Suction -i Clap - H Zoom - Z

Default foreground and background color-D switch foreground and background color -X

Edit mode switch -Q display mode switch -f

Also, if we hold down the Alt key and click the displayed tool icon or hold down the SHIFT button and repeat the alphabetic shortcut, you can loop the hidden tool.

4. Get precise cursor

Pressing the Caps Lock button to display the cursor of the brush and the magnetic tool as an exact cross line, then restore the original.

5. Show / hide the control board

Press the Tab button to switch to display or hide all the control boards (including the toolbox). If you press SHIFT TAB, the toolbox is not affected, only other control panels are displayed or hidden.

6. Quick restore defaults

Some people who are not good at photoshop are really a variety of times in order to adjust the satisfaction. The results found that the original default effect is best, this is stupid, regret it, I can't, I can't be the original! how

Restore to the default? Try to touch the tool icon on the option bar, then select "Reset Tool" or "Reset All Tools" from the context menu.

7. Free control size

The shortcuts of the zoom tool are "Z", and the "Ctrl Spacebar" is the enlargement tool, "Alt Spacebar" is a reduction tool, but it can be scaled with the mouse click to zoom; the same

Press CTRL " " and "-" to zoom in and narrowed images; Ctrl Alt " " and Ctrl Alt "-" can automatically adjust the window to display the full screen zoom display, use this

Tools You can browse all over the case, no matter how much the image is displayed! If you want to automatically adjust the window according to the size of the image while using the zoom tool, you can

Click the "Full Canvas Display" option in the attribute bar.

8. When using a non-Hand Tool (Hand Tool), press and hold the space bar to convert to a hand tool, which is the visible range of the image within the window. Double-click the mouse on the hand tool to make the image

Displayed with the most suitable window size, double-click the mouse on the zoom tool to make the image in a ratio of 1: 1.

9. When using the ERASE TOOL (eraser tool), press and hold the Alt key to switch the eraser function to the specified step recording state.

10. When using the Smudge Tool, press and hold the Alt button to apply the purely smear to the foreground color.

11. To move the word pick-up range to use Type Mask Tool (Text Mask Tool), you can switch into a fast mask mode (switch with shortcut q), then move again, complete

Just switch back to the standard mode again.

12. After holding down the Alt key, use the Rubber Stamp Tool (Rubber Stamp Tool) to click the mouse in any open image window, you can set a sampling position in the window, but will not change

Function window.

13. When using the Move Tool (Mobile Tool), press the arrow kemp on the keyboard directly on the image on the layer from 1 Pixel. If you first press the SHIFT button, press the direction button again.

Time 10 Pixel moves images. Press the ALT key to the selection will move the copy of the constituency. 14. When using a magnetic set tool or a magnetic pen tool, press the "[" or "]" button to increase or reduce the sampling width in real time (in the option palette).

15. Measurement tools are very convenient on the measurement distance (especially on the oblique line), you can also use it to be angled (like a plurality of anglers). Select metrics under the premise of the information panel

With a straight line, press and hold the Alt key from the node of the first line, then drag the second line, so that the angles and lines between the two lines are displayed on the information panel. Measurement tool

Drag can move the measuring line (you can only move a node of the measuring line separately), which can be deleted outside the measuring line to the canvas.

16. Use the painting tool such as a brush, a pen, etc.), hold down the SHIFT key with the mouse, can connect two click to line.

17. Press and hold the Alt key Use the straw tool to select the color to define the current background color. Monitor the color change of the current picture by combining the color sampler tool (SHIFT I) and the information panel. Before and after changing

The color value is displayed next to the sampling point number on the information panel. The color mode of the sample point can be defined by the pop-up menu on the information panel. To increase the new sampling point, just use color on the canvas.

Where is the color sampler tool, click on the Alt key to remove the sampling point. But only four color sampling points can be placed on a picture. Dialog box in Photoshop

(For example: color order command, curve command, etc.) When pop-up, add new sampling points must be held down and click on the SHIFT button. Press and hold the Alt Shift Click to lose a sampling point.

18. The cutting tool must have been used, this situation you must also encounter; when you adjust the cutting, the cut box is more close to the image boundary, the clipping box will automatically attach the image.

On the edge, you can't cut the image. However, just take the "ctrl" button when adjusting the cutting border, then the cut box will serve the post, let you crop.

Replication skills

19. Press and hold the CTRL Alt button to drag the mouse to copy the current layer or the selection content.

20. If you have recently been copied in a clipboard, Photoshop will use the size of the new figure as the size of the new map as the size of the newly created drawing when there is a new file (Ctrl N). Whisker

After this feature, use the last setting, hold down the Alt key (Ctrl Alt N) when open.

21. If you create a new work, you need a file with a file that has been opened with an open picture. Select "File" → "New", point photoshop menu bar

Windows options, click on the top column of the pop-up menu, click on the name of the picture, is this simple!

22. Press the ALT key (Ctrl Alt T) when using the free transform tool (Ctrl T), then copy the original layer (CTRL SHIFT T) after the current layer is copied. Again

Perform the last transformation, Ctrl Alt Shift T is re-executed after copying the original map.

23. Using "By copying new construction (Ctrl J)" or "Cut new construction (CTRL J)" command can complete copy to paste and cut into paste;

(Cut) The new layer command is still placed in their original place, however pasted by copy (cut), it will be attached to the center of the picture (or selection).

24. To copy the image directly without wanting the naming dialog, press and hold the Alt key before executing the "Image" → "Copy" command.

25. Photoshop's clipboard is very easy, but you prefer to use the Windows system clipboard directly to process images taken from the screen. Ok, press Ctrl K, in the pop-up

The "output to the clipboard" point on the board!

26. Regular replication in Photoshop

When you are designing, we will often place certain elements to seek a form of beauty, and you can easily derive the combination of four shortcuts in Photoshop. (1) Select the object you want to copy;

(2) Press CTRL J to create a floating Layer;

(3) Confirm after rotating and moved to the appropriate position;

(4) You can now press "T" and then press "T" to regularly copy the continuous object. (I only hold Ctrl Shift, just regular movement)

27. When we want to copy selected objects in the file, use the copy command in the Edit menu. Copying once you may not feel trouble, but you have to copy multiple times, click on the other once.

When it is inconvenient. At this point you can select the object first, then click the mobile tool, then hold the "Alt" button. When the cursor becomes a black or white overlapping two arrows together,

Drag the mouse to the desired location. To copy multiple times, just relax the mouse.

28. You can use the optional frame tool or a settling tool to drag the selection from one document to the other.

29. To establish a replication document for the current historical state or snapshot:

(1) Click "Creating a New Document from the Current Status" button;

(2) Select a new document from the historical panel menu;

(3) Drag the current state (or snapshot) to the "Creating a New Document from the Current Status" button;

(4) Right-click on the status (or snapshot) from the pop-up menu to select a new document to drag a historical state of the current picture in the history state to another picture, change the inner picture of the target image.

Rong. Press and hold the Alt key to click any historical state (except for the current, the most recent state) can copy it. The status that is then copied becomes the current (most recent) state. Press and hold the Alt drag action

The step can be copied to another action.

Selection skills

30. When dragging the selection zone or layer from one document, hold down the SHIFT key to place it in the destination document. Drag if the source document and the size of the destination document are identical

The elements are placed in the same place as the source document (rather than placing the center of the canvas). If the destination document contains the selection, the dragged element is placed at the center of the selection.

31. Click the triangle button in the upper right corner in the action template, select the load action from the pop-up menu, enter the Photoshop / Goodies / ActionS directory, there is button, specifications,

Command, image effect, text effect, texture, six action sets, including a lot of practical things! In addition, there is an Actions.pdf file in this directory, available

The Adobe Acrobat software is opened, and the method of use and the resulting effect of these actions are described in detail.

32. Click the brush tool in the toolbar, click the small triangle on the right side of the touchpad label in the subsequent displayed attribute bar. In the pop-up menu, click the small arrow to select "Load Brush ...".

Select * .abr in the brushes folder of Photoshop Directory. It has so much lovely thing here.

33. Picture of a beautiful mark and want to reuse in the work? Good to do it, select it with a set of cable, select "Save Brush ..." in the BRUSHES pop-up menu, then use the brush tool to choose

This new pen is ... Friend, want to make room spray?

34. If you want to select a part between the two selection zones, press and hold the SHIFT and Alt keys while the existing selection area is dragged, draw the second selection area (mouse cross

A multiplication is displayed in shape, indicating that the zone that will be retained).

35. Remove the square or circle in the selection area, first add any of the selection zones, then in this selection area, press the ALT key to the rectangular or elliptical mask tool. Then loosen

Alt key, hold down the Shift key, drag to you. Then release the mouse button first release the Shift key.

36. Delete a selection area from the center, in any of the selection area, first press the Alt key to the rectangular or elliptical mask tool, then loosen the Alt key once again, and finally release the mouse button again. Loosen the ALT key.

37. When you want to quickly switch the mask area or select the area option, first click on the Alt key and then move the cursor to the fast folding mode icon.

38. When using the box tool, press and hold the SHIFT button to draw the square and the regular selection; press and hold the Alt key to set the selection from the starting point.

39. Use the "Researcher command (Ctrl Shift D) to load / recover the previous selection.

40. Press the Alt key when selecting the setup tool to switch between the setup tool and the polygonal settles. Press and hold the space bar when you select the constituency.

41. Press and hold the Ctrl key to click the icon (on the layer panel) to load its transparent channel, then press the Ctrl Alt Shift key to click another layer to select the transparent channel of the two layers.

42. Switch to fast mask mode between zoom or copy images [Q] can retain the original constituency.

43. How to use the Shift and Alt keys in the Select Box tool:

When using the "Select Box", you want to expand the selection area. When you hold the Shift key, the cursor " " will become "ten ", drag the cursor, so that you can re-expand the basis.

You need the selection area. Or two or more selected boxes are simultaneously selected in the same parallel image.

When using the "Select Box", you want to subtract redundant pictures in the "Select Box". At this time, "Alt" button, the cursor " " will become "Ten -", drag the cursor, so Can stay

The picture you need.

When using the "Select Box", you want to get the part of the two selection frames, then hold the "Shift Alt" button, the cursor " " will become "ten í", drag the cursor, so you want

Part of the part.

When you want to get the front or square in "Selection Box", hold down the "Shift" button, you can.

44. How to use the SHIFT and ALT keys in the "Settings" tool:

Increase the selection range Press the "Shift" button. (The same as the "Select Box")

Reduce the selection range Press the "Alt" button. (Methods and "Select Box" 2)

Two selection frames are superimposed by "Shift Alt" key. (Method and "Select Box" 3 identical)

45. How to use the SHIFT and ALT keys in the Wand Tool:

Increase the selection range Press the "Shift" button. (The same as the "Select Box")

Reduce the selection range Press the "Alt" button. (Methods and "Select Box" 2)

Two selection frames are superimposed by "Shift Alt" key. (Method and "Select Box" 3 identical)

Quick key skills

46. ​​You can quickly browse your image with the following shortcuts:

Home rolled up to the upper left corner of the image; END rolled to the lower right corner of the image; Page Up rolled up to the above image; Page Down rolled down to the image below; Ctrl Page Up to the image

Z. Ctrl Page Down Roll to the image of the image.

47. Press the CTRL button ALT button 0 key to make the image to be displayed in 1: 1.

48. When you want to "tight" (adjust the space between individual letters), first click between the two letters, then press the Alt key to adjust with the left and right direction keys.

49. Restore the settings in the dialog to the default, then press the Alt key first, the CANCEL key will become a reset button, and then click the Reset button.

50. To quickly change the value displayed in the dialog box, first click on that number, let the cursor in the dialog box, and then use the up and down direction keys to change the number. If

Use the arrow keys to change the value before pressing the SHIFT button, the change speed of the value will speed up. 51. Photoshop 6.0 adds SHIFT CTRL Z (to follow the order of operation in addition to the frequently familiar shortcut CTRL Z (can be switched in history and current state)

Constant step-by-step recovery operations) and Alt Ctrl Z (User Operate can be continuously canceled in operation) two shortcuts. Press CTRL ALT Z and CTRL SHIFT Z composite bonds to

In the middle of the history, you can use these commands in the middle of the history (or you can use the menu in the historical panel).

52. Fill function:

SHIFT Backspace opens the fill dialog;

Alt Backspace and Ctrl Backspace combinations are filled in foreground and background colors;

Press Alt Shift Backspace and Ctrl Shift Backspace key combination to fill only existing pixels (maintain transparent areas) when populating the foreground and background colors.

53. The D key on the keyboard, the X button can quickly switch the foreground color and background colors.

54. Draw a straight pen touch with any drawing tool: first click on the start position, then hold down the SHIFT button, then move the cursor to the end point.

55. When opening the CURVE dialog box, click the Curve box after pressing the Alt key to make the grid are finer, and then click the mouse to restore the original.

56. After selecting the tool selection range using a rectangle (ellipse), press and hold the mouse and then press the space bar to adjust the position of the pick box, and then adjust the size of the selected range after release.

57. Increase a rectangle or ellipse drawn from the center, in any of the selected selection area, press the SHIFT key to drain the rectangular or elliptical mask tool, then release the SHIFT button.

Then press the Alt key and finally release the mouse button and release the ALT key. Press ENTER or RETURN to turn off the slider box. To cancel your changes, press the ESCAPE button (ESC). To open pop-up

When the slider dialog increases or decreases value by 10%, hold down the Shift key and press the arrow key or the down arrow key.

58. To preview the CMYK mode color of the RGB mode image on the screen, execute the View "→ New View command, after generating a new view, then execute" View "→" Preview "

→ The "CMYK" command can simultaneously view images of the two modes for comparative analysis.

59. Press the SHIFT key to the Spring tool restriction box as a square or circle; press the Alt key to pull the box tool from the center to draw the box; press the SHIFT ALT key to move the box tool from the center

Draw a square or circular box.

60. To prevent the box from using the cutting tool to adsorb on the picture border, press and hold the CTRL key when dragging the control point on the Cutting Tools box.

61. To correct the tilted image, first use the measurement tool to draw a line as a level of horizontal or vertical direction (such as the horizontal line of the image, the horizontal line, the horizontal line, etc.),

After the "Image" → "Rotate Draw" → "Any Angle ..." is selected from the menu, it will be automatically filled with the correct rotation angle, as long as it is OK.

62. You can use the cutting tool to complete the rotation and cutting work: first draw a box with a cutting tool, drag the control point on the box to adjust the angle and size of the pick box, and finally press Enter

Implement rotation and shear. The angle of the measurement tool is also automatically filled in the Digital Transform Tool ("Edit" → Transform "→" Number ") dialog box.

63. All pixels outside the cropping range are lost after cropping images. To cut without loss, you can replace it with the "Canvas Size" command. Although Photoshop will warn you will do

Some cutings, but for some reason, in fact, there is no way to reserve all "cut" data outside the screen, but this does not work on index color mode.

64. When combining the layer, press Ctrl Alt Shift E to copy all the visible layers to the current layer after copying all visible layers. You can also hold the Alt key when the merge layer will hold the current layer.

After copying a copy, it is incorporated into the previous layer, but CTRL Alt E This hotkey does not work.

65. Press the SHIFT BackSpace key to activate the "Edit" → "Fill" command dialog, press the Alt Backspace button to fill the foreground color to the optional box; press the Ctrl Backspace button to put the background

Fill in the eight selection box.

66. Press the Shift Alt BackSpace button to fill the foreground color into the option box and keep the transparent settings, press the SHIFT CTRBACKSPACE button to keep the background color into the Select box to keep the transparent setting.

67. Press the Alt Ctrl Backspace key to fill the selection or layer from the history, press the SHIFT ALT CTRL BACKSPACE button to fill the selection or layer in the record and keep the transparent setting.

68. Press the CTRL "=" button to make the image display continuously, but the window does not shrink; press the Ctrl "-" button to make the image display continuously, but the window does not shrink; press

The Ctrl Alt "=" key allows the image to display continuously, and the window is zoomed; pressing the Ctrl Alt "-" button to make the image display continuously and the window is reduced.

69. When moving the layer and the selection, hold down the Shift key to do the movement of horizontal, vertical or 45 degrees; press the direction button on the keyboard to do one pixel movement each time; hold down the Shift button and press the keyboard

The arrow keys can be moved each time 10 pixels.

70. When creating a reference line, press the SHIFT key to adjust the reference line to the scale scale; press the ALT key to change the reference line to change the reference line to horizontally or vertically orientation.

71. In the "Image" → "Tuning" → "Curve" Command dialog box, press and hold the Alt key to click the mouse in the grid line to make the line fine or rough; hold down the Shift key and click on the control point to select

Multiple control points, press and hold the CTRL button and click a control point to delete it.

72. To copy the image on a layer to another image window in a different image window, press and hold the SHIFT button while dragging to the destination window, then the image is dragged to the destination window.

It will be automatically centered.

73. When using the "Edit" → "Free Transform" (CTRL T) command, press and hold the CTRL button and drag a control point to perform free deformation adjustment; hold down the Alt key and drag a certain control point

For symmetric deformation adjustment, press and hold the SHIFT key and drag a control point to adjust the adjustment of scale zoom; hold down the Shift Ctrl key and drag a control point to make perspective effects

Adjust; press the SHIFT CTRL button and drag a control point to make a slope adjustment; press ENTER to use the transform; press the ESC button to cancel the operation.

74. In the swatch tuning board, press the SHIFT key to click on a color block, replace this color with the foreground; press the Shift Alt key to click the mouse, insert it to the new color block in the order;

Press the Alt key to click on a color block, turn the background color color; press the CTRL button to click a color block to delete the color block.

75. On the layer, channel, path tuning, press the Alt key to click the tool button at the bottom of these tunnels, and the corresponding dialog changes to the corresponding dialog change settings.

76. On layers, channels, path tuning boards, press CTRL keys and click on a layer, channel or path to load it as a selection; press CTRL SHIFT to click, add to the current selection; press Ctrl Shift Alt key and click, cross the current selection.

77. When using the layer mask in the layers, press the Shift key and click the layer mask to abandon map, there will be a red fork, indicating that the current mask is disabled, press the Alt key and click on the layer Meng Board

Figure, the mask will display the overall image to facilitate observation adjustment.

78. In the path tuning board, press and hold the Shift key on the path to the path tuning board to switch whether the mouse can switch whether the path is displayed.

79. After changing the settings of a dialog box, if you want to recover to a previous value, press and live in the Alt key, the cancel button will turn the reset button, click on the reset button.

Path skill

80. After selecting a point on the adjustment path, press the "Alt" button, then click the left mouse button to click on the point, then one "adjustment line" will disappear, then click Next

The path is not affected.

81. If you use "path" to draw a path, and the current state is a pen, you only press the carriage return button on the keypad (remember is the carriage return on the keypad, not the primary keyboard

of! ), Then the path will change immediately to "select the area".

82. If you draw a path with a pen tool, and now the state of the mouse is a pen, you only need to press the carriage return on the keypad (remember is the carriage return on the keypad, not the primary key.

On the dish! ), Then the path is immediately loaded as a selection.

83. After holding down the Alt key, click the mouse on the trash can icon on the Path Control Board to delete the path.

84. Press and hold the CTRL button when using the path other tool to temporarily turn the cursor to select the range tool.

85. When holding down the Alt key, click the mouse on the trash can icon on the Path Control Board to delete the path.

86. Press and hold the CTRL button when using the path other tool to temporarily select the range tool.

87. Click on the blank area on the path panel to close all the path display.

88. When you click on the few buttons below the path panel (with the foreground color), use the foreground color stroke path to load the path as a selection, press and hold the Alt key to see a series of available work.

Take or option.

89. If we need to move the entire or multiple paths, select the path you want to move and use the shortcut Ctrl T to drag the path to any location.

90. In the outline path, our most commonly used operation is still a single line of the pixel, but there will be problems at this time, that is, the torque teeth exists, which affects the practical value. At this time, we may wish to first

Its path is converted into a selection, and then the constituent will be strokes, and the lines of the original path can be obtained, but the torque teeth can be eliminated.

91. Converting the selection zone to the path is a very practical operation. This feature is consistent with the corresponding icons in the control panel. When this function is called, the desired property setting will be available.

Out of the Make Work PQTH setting window.

92. Press and hold the SHIFT button when making a path using the pen shape, press and hold the path or 45 degree angle, vertical or 45 degrees, press and hold the CTRL button to temporarily switch to the path selection tool, hold down Alt

The key clicks on the black node on the black node to change the direction of the direction, so that the curve can be turned; pressing the ALT key to select the tool Click the path to select the entire path;

Multiple paths can be clicked one by one after the SHIFT; pressing the "Ctrl Alt" button when using the path selection tool to switch to the plus node and the subtile mesh tool.

93. To switch whether the path is displayed, you can click on the SHIFT button to click on the path to the path palette, or click the Gray area of ​​the path coloring version.

Ctrl Shift H. To switch the color mode directly on the Color palette, you can first press the SHIFT button, and then move the cursor to the colors bar. Filter skill

98. Filter Shortcut

Ctrl F - uses a just used filter again.

Ctrl Alt F - uses a new option using a just used filter.

Ctrl Shift F - retreats the last used filter or adjustment effect or changes the synthesis.

99. In the filter window, press the Alt key, the CANCEL button will turn into the RESET button to restore the initial situation. Want to enlarge the size of the image preview in the filter dialog, press "Ctrl" directly

Click on the preview area with the mouse to zoom in; if the "Alt" button is quickly smaller in the preview area.

100. The first line of the filter menu records the usage of a filter, which is easy to perform.

101. The effects of opaque and color mixing can be adjusted on the effect of the filter in the panel of the layer (the object of operation must be a layer).

102. The range of feather (Feather) can reduce the feeling of abrupt.

103. When using the "Filter" → "Rendering" → "Cloud" filter, to generate more obvious cloud patterns, then press and hold the Alt key and then execute the command;

The color effect, you can press the SHIFT button before executing the command.

104. When using the "Filter" → "Rendering" → "Light Effect" filter, if you copy the light source within the dialog, you can press and hold the ALT key and then drag the light source to achieve copy.

105. Processing for the selected area. If there is no selected area, the entire image is processed; if only one layer or a certain channel is selected, only the current layer or channel is active.

106. The processing effect of the filter is in pixels, that is, the same parameter processing different resolution images, the effect will be different.

107. RGB mode can use all filters to graphics, and text must become a graphic to filter.

108. Use the new filter to first use the default setup experiment, then give a lower configuration, try again. The process and results of the following changes were observed. Use a smaller image

Processing, and save the original file, not to use "Restore". This makes the operator to compare the result, and write down the settings you really like.

109. Before selecting the filter, the image is placed in a newly established layer, and then the layer is processed with a filter. This method allows the operator to mix the effect of the filter into the image, or

Change the mixed color mode to get the effect it needs. This method can also make the operator in the process of design, change the filter effect of the image at any time according to its own idea.

110. Even if the operator has used the filter layer, it is also possible to select "faded ..." command. When the user uses this command, only the opacity can be adjusted, but also change color

mode. Before ending the command, the operator can use the filter to process the layer with a filter. Note that if "restore" is used, it cannot be changed.

111. Some filters can handle a single channel, such as a green channel at a time, and it can be very interesting results. Note that any filter can be used when processing the grayscale image.

112. The data processing of the Alpha channel will be excited with the filter, and the grayscale image can also be processed, and then the channel is selected, and other filters can be applied.

Take the entire image. This technique is especially suitable for crystal refractive filter.

113. Users can break the appropriate settings and observe what effects occur. When the user does not set a filter in a regular setting, a wonderful special effect can be obtained. For example, will be vainless or dust

The parameters of the scratches are set to be higher, sometimes smooth, and the effect is particularly good.

114. There is a technology that produces better and special effects, ie, the same (too much). This technology is particularly good in Western Europe for the operator filter. Of course, other filters can be used. The user can also use the same filter, or use a completely different filter, multiple times for the same choice, look at the effect.

115. Some of the effects of some filter are very obvious, and the subtle parameter adjustment can result in obvious changes, so it is necessary to choose carefully to avoid the wind of each filter because it is too large.

grid. The image that handles the transition can only be used as a sample or example, but they are not the best art, and the use of filters should also be selected according to the needs of artistic creation.

Layer skill

116. To move the current changing layer: Next "Ctrl ]" key key, you can turn the current layer to the top; press the "Ctrl [" key button, you can put the current Figure

Layers downwards.

117. Drag the layer to be copied to the "New" icon on the top of the panel to create a layer.

118. When moving the layer or selected range, hold down the SHIFT key to move the level, vertical or 45 °.

119. When moving the layer or selected range, press the direction button on the keyboard to make the movement of 1 PIXEL.

120. When moving the layer or selected range, press the SHIFT button and then press the direction button on the keyboard to move each 10 Pixel.

121. When deleting the layer directly, you can first press the Alt key to move the cursor to the trash can on the layer control board.

122. After pressing the CTRL button, your mobile tool has an automatic selection function. At this time, you only click on the object on a layer, then Photoshop will automatically switch to that object.

At the layer; but when you release the Ctrl key, your mobile tool is not automatically selected, so it is easy to prevent you.

123. You cannot drag multiple layers to another document simultaneously in the level panel (even if they are linked) - this only moves the selected layer.

124. To put multiple layers into a group, the fastest way is to link them and select Group Link Layer Command (Ctrl G). When moving multiple layers between different documents

You can use the mobile tool to drag multiple layers during the document. It can also be used to combine (Ctrl E) multiple visible layers (because the current layer is linked to other layers "

A layer group command will become a "Group Link Layer" command).

125. Press and hold the Alt key between the layer board to click on the two layers. When some layers are in some and you just want to group some of them to group some of them.

Because the group command (Ctrl g) is turned to the group link layer command (Ctrl g) when the current layer is linked to other layers.

126. Double-click the "T layer control" panel with the mouse to edit the text again.

127. Press and hold the Alt Click the desired layer of eye icon to hide / display all other layers.

128. Press and hold the Alt Click the brush icon before the current layer to release the link to all other layers.

129. To clear all the layers on a layer, press and hold the Alt key to double click the layer effect icon on this layer.

130. To turn off one of the effects, press and hold the Alt to select its name in the Layer → Layer Style submenu; or cancel it in the Layer Effect dialog box "

"mark.

131. Here is a way to increase the adjustment layer of time: just hold down Ctrl Click "Creating a New Layer" icon (at the bottom of the floor) Select the adjustment layer type you want to add!

132. In addition to editing the layer mask in the channel panel, the icon on the plane on the alt click can open it; hold down the Shift key to attack the mask icon to turn off / open the mask (will display one

Redficard x represents the shutdown mask). Press and hold the Alt Shift Click on the slightplate to display ruby ​​(50% red). Press and hold the CTRL key to attack the mask icon to load its transparent constraint.

133. Display all contents of the current selection on the "Adding Layers Mask" icon (bottom at the bottom of the floor); Press and hold the Alt key "Add Layer Mending" icon plus Mongo hides the current selection content.

134. When the current tool is a mobile tool (or press and hold the Ctrl key at any time), right-click on the canvas to open a list of all layers of the current point (press from top to bottom): Select the name of the layer from the list.

To make it a current layer.

135. Press and hold the Alt key mouse button to automatically select the most upstairs of the current point, or open the automatic selection layer option in the Move Tools Options panel can also be implemented.

136. Alt Shift Right click on whether the current layer is linked to the top layer.

137. When we need multiple layers, we can first select the area in the file in the selection tool, draw a selection virtual box; then hold the "Alt" button, when the cursor becomes a small right corner

When "-" " " (this represents the selected area or pixel), pull out the second box in the first box; then press the "shift" button, when the cursor becomes a lower right corner Take one

When the " " big " ", the third selection box is pulled out in the second box, so that the two can be used, and multiple layers can be selected. Use this method or choose irregular

Object.

138. Press the SHIFT " " button (forward) and the SHIFT "-" key (backward) to switch on the synthesis mode of the various layers. We can also quickly switch in accordance with Alt Shift "a character"

Mode.

N = normal (Normal)

I = Dissolve

M = positive bracket (Multiply)

S = screen (screen)

O = overlay

F = soft light (Soft Light)

H = strong light (hard light)

D = color reduction (Color Dodge)

B = color burn K = Darken (DARKEN)

G = bright light (LIGHTEN)

E = difference (DIFCERENCE)

X = exclusion (Exclusion)

U = color phase (hue)

T = saturation (SATURATION) C = color (color)

Y = luminosity q = back (behind 1)

L = threshold (Threshold 2)

R = Clear (Clear 3)

W = dark tone (Shadows 4)

V = middle tune (Midtones 4)

Z = highlight (Highlights 4)

Color skill

139. Photoshop is a 32-bit application. In order to properly watch the file correctly, you must set the screen to 24-bit colors.

140. Execute the View "→ New View command first, generate" View "→" Preview "→" CMYK "after the new window, can simultaneously view images of two modes.

141. Click the straw or ten boss on the window, you can change the size and color mode by the pop-up menu.

142. Press and hold the color strip under the SHift Click on the color panel to change the type of chromatogram it appears. Alternatively, right-click on the color strip, from the pop-up color bar option menu

Select other color mode.

143. Click any of the blank (gray) area on the panel panel to add a custom color on the palette, press and hold the CTRL button to minus a color, hold down Shift Click for

Change a color.

144. By copying the 16-encycloped color value displayed in the Photoshop pickup, you can exchange color between Photoshop and other programs (other programs that support 16-en-colored value).

according to.

145. When opening the color range dialog, press the CTRL key to make an image and select the preview switch. If you press the SHIFT button to make the straw becomes a " " symbol, if the ALT key is pressed, the straw becomes a "-" symbol.

146. Press SHIFT BackSpace to call out the fill dialog box.

147. Switch the color mode directly on the color control panel, and then move the cursor to the column mouse and click the SHIFT button.

148. To convert a colored image into a grayscale image, the usual method is to use "image" → "mode" → "grayscale", or "image" → "decoration". But now there is a method

It can make the color to convert into grayscale is more delicate. The step is to first convert the image into a LAB color mode: "Image" → "Mode" → "Lab Color", then come to the channel panel, delete

Channel A and Channel B, you can get a grayscale more delicate image.

Image processing skills

149. Press the CTRL button to click on the preview area with the mouse, the image is enlarged; press the Alt key to click the preview area with the mouse, and the image is reduced.

150. Picture of making a transparent background

In general, the pictures of the transparent background in the network are GIF format. In Photoshop, you can use the command "Image" → "Mode" → "Index Color" to 256 colors.

, Use the command file / export / gif89a to output the picture to the GIF map file that can contain a transparent background, of course, don't forget to use Photoshop's color dropper in the command window.

Part of the color is set to transparent color! Do not choose to save or save when saving files, but directly select "Output GIF" and then select transparent colors, if you need transparent parts are white

Color is white, sequentially introduce the background image, and then Save for Web can be transparent.

151. Write Chinese on the GIF map, why is the writing not continuous?

First turn the GIF to RGB, write the word and then turn back to INDEX Color.

152. If the bright color is excessively phenomenon due to the execution of a USM sharpening command, the image can be converted to the LAB color mode, and then execute the USM sharpening command in the mulking channel.

This can not only achieve the purpose of clearing the image, but also avoid affecting the color.

153. To check if the image entered by the scanner is ideal, you can open the information tuning board to view the bright portion of the image and the dark portion of the image reaches 240 and the dimension value reaches 10, indicating that this image is included.

Enough detail.

154. To convert color pictures into black and white pictures, you can transfer color mode into LAB mode, then take the magic channel in the channel panel, then execute "image" → "mode" → "grayscale

"Command, due to the wider color gap between the LAB mode, this is richer in the transformation.

155. When using Photoshop, we often need to find the right material from a large number of gallery, then you can use acDsee to help, you can use the ACDSEE window with the photshop window.

Arrange to screen on the screen, then drag the selected picture in the ACDSee browsing window (can select multiple files while pressing the Ctrl button) to the Photoshop window, wait until the mouse pointer

After the " " small icon is released, the mouse is released, the picture is opened in Phoshop.

156. What picture is suitable for weight loss?

In general, we must make corresponding weight loss measures based on the quality of our requirements. There are also some pictures to be modified. If you easily merge it, click on the storage, then

You will become complicated in your future modification. Because it is not possible to restore the resolution after storage, everyone should think twice. So don't pursue capacity and neglect quality

Quantity, and bring unpredictable troubles in the future!

157. Image file weight loss

Re-adjusting image size: larger size image occupies more disk space because it has more pixels. But if you try to use the width and height properties in the tag to adjust the size of the image, you will be disappointed because you don't save download time.

Use thumbnail: By setting a small image version, make the user clicks to see the full image. But you should specify the full map size next to it so that the user decides whether to watch the full picture.

Store GIF in JPEG: JPEG compression is most applicable to images with many colors.

Increase the compression ratio: If it is a JPEG file, you can re-save it with a higher compression than to reduce the file size. But don't forget the price: higher compression ratio reduces image quality.

Reduce the color depth: A GIF image has a maximum of 8 bits (256 colors), and there is fewer information in each pixel, and the final file will be smaller.

Adjust the contrast level in the image: Most graphics software provides a heavy rolling option such as gamma correction and highlight / medium (Midtone) / shadow to change one

Comparison within the image. Reduced these values ​​can usually reduce file size.

Inhibition jitter: Jitter refers to a color that is not in the palette with the color in the existing palette. Jitter increases the GIF file size.

158. How to lose weight with a font

Many times we like to use Photoshop's "Font" feature to add a few words to the picture, make the picture more beautiful. But this dragon's finger will make the space size of the occupancy will violently

By dozens k becomes the capacity of M count. Strange, why is the change will suddenly be so big?

In fact, after you merge the layers, you can use other tools such as ACDSEE transition format or saved to other formats, it will be smaller! Generally stored .jpg comparison

Suitable.

If your image quality requires not too high, you can first merge the layers then convert it to Index Color (256 color or less) or control the size on the basis of .jpg format.

159. Document weight loss

For example, in Photoshop, save a * .tif file, how can the file that the two K K will become 3m? In fact, you can remove the original files as long as you replace a format.

160. Black and white map scanning what format file

If it is the chart, use GIF, if it is a photo, JPG. Black and white picture suggests first convert to grayscale, then save it as GIF; if the color is 256 or less, it is best to use GIF - file size

Small, no loss of quality; if it is true color, you must jpg.

161. Transition from the real thing

How to achieve a certain region or the opacity of a selected area or the opacity of a certain selection area or a layer of opacity? Simply as long as the feather selection or make a layer mask, then create a layer to make it black and white

Gradient, then merge the layer of layer that needs to be effect.

It is also possible to transition this area or layer from above to 100% opacity from above to 0% by Mask. These percentages can also be changed at will.

162. Image mixing overlay

In the advertising design, the synthesis and superposition of images are often used. In fact, the implementation is simple:

Open the main image as a background diagram.

Then open another picture, CRTL A is all selected, CRTL C copy.

Go back to the main image, CRTL V paste. A new layer appears here. In this layer, the mode is Multiply or Screen. At this time, the two images have been superimposed together. Finally adjust the image

The location is best.

Very artistic effect is not there, you can also clone your twin compatriots!

163. How to implement a dashed line in Photoshop

Double-cracked brush, remember 100% in spacing, it will leave a gap, then use Brush paintings. Popular path, define brush: Space is set to 200 or more, open the Path panel --storke path.

How to overlap two equivalents of the same size in a translucent effect?

In the layer panel: The transparency of the upper layer can be changed, or the mixing mode of the layer can be changed.

164. Go to the burrs

You can try the outer contour of the image with a path tool or a magic rod, and then use "Send" "feather", then reverse selection and then delete it, it may be better.

165. How can I store the buckle or not the background of the back?

Will "Copy" selected by the dashed line, then "Paste", then delete the bottom layer, and finally "Ctrl S". Note that the storage format should be. Psd format or .eps format or .AI format.

166. Quickly fill

Open the picture you want to fill, execute Ctrl A, select all images, execute "Edit" → "Define Pattern", define the image as the pattern to perform "Edit" → "Fill".

167. Remove the image of the picture

(1) Scan pictures of pictorial or magazine

Under normal circumstances, the generation of the messenger is caused by a rough texture of the image or magazine printing paper. When the scan is scanned, the value of the DPI should be set, the higher the resolution, and the figure is swept out.

The larger the film, the higher the relative fineness. Higher resolution will create good conditions for the next picture reduction and filter processing.

(2) Adjust the picture to the appropriate size

Select the "Image Size" option under the "Image" menu, pop up the Image Size dialog, determine the limit scale option under which it is checked, in the pixel size, the image after Width

The percentage is percentage. At this time, the width value becomes 100, then you can enter the percentage value required, and reduce the picture. The narrowed network liner is slightly weakened.

(3) Eliminate the network with Gaussian

Select "Display Channel" in the Window menu, and the channel panel appears, and the four channels are RGB, Red, Green and Blue, respectively. Select the Red channel, the picture is displayed as a black and white effect.

Select "Fuzzy" → "Gauss" in the Filter menu, which popsters the Gaussian blur dialog box. Adjust the radius value, control the range of the falundation, so that the row in the Red channel is almost

However, the picture content is slightly ambiguous. The GREEN and Blue channel are then adjusted in this method to disappear with the network in the channel. Finally, I returned to the RGB channel. At this time, the picture already

There is no interference of the network. Note: The value of RADIUS cannot be set too large, so as not to cause excessive impact on the RGB channel to make the picture shook.

(4) Adjust the last effect

If the rig is too clear to cause a largermost value setting, the picture in the RGB channel will be a bit blurred. If you want to make the picture clear, you can also perform the "Filter" menu.

"Sharpening" clear effect. Finally, use the "Adjustment" → "Color Order" or "Brightness / Contrast" option in the "Image" menu to set the final full fullness.

Effect

转载请注明原文地址:https://www.9cbs.com/read-125888.html

New Post(0)