Homemade Linux Bbiagent router, sharing broadband

xiaoxiao2021-03-06  113

586- Pentium 133, 16M EDO memory, 1M graphics card and floppy drive; also bought two TP-LINK RT8029 from the computer city inserted into the PCI slot of the old machine, the hardware is ready. On the Internet, the hardware is 386 or a better central processor, but because 386 does not have a PCI slot, 486 slot is very small, and it is difficult to find, I use 586 configuration, this router is not High end :). Enter http://www.bbiagent.net/ after entering the website, click on the software to download, see no ... I. Make and download the image file of the router boot disk Click this section to click on this section, ie "applet" ". what? No! Hey, you are as unlucky as me, use Microsoft's Windows XP, no way, we go http://java.sun.com/getjava/download.html to download and install a Java virtual machine! After clicking, wait for a while, will pop up a custom window, of course, "Next", set the router in the IP address in the local area network, the subnet mask (not everyone here, do not change), router computer CPU type, Memory size, then "Next" begins to choose the network card model you use to connect to the local area network, my TP-LINK RT80299 10M PCI network card; after selecting the NIC, you will ask you to fill in the interrupt request of the NIC, because I am two blocks It is a PCI network card, so you don't have to fill, and ISA you have to set it carefully. If you see the benefits of 586 now.

The internal setting of the LAN is over, and the next step is of course setting the block that is connected to the Internet. First, you need to select a broadband type, I am based on DHCP-based FTTB LAN, of course, Select DHCP (Dynamic Host Configuration Protocol). ADSL can select PPOE, and Modem can select PPP. Then I choose the NIC. It is the same network card model to connect to the Internet. The two network card model I bought is the same, and the same is true for the LAN; according to the next step, you should write interrupt requests, don't write, then Next, good Now you can choose the IP segment of the machine that you want to access the network within the local area network and the gateway, according to the default. Still the next step, confirm that the parameters you have chosen are correct, press the download, the system will automatically generate a routing program that is suitable for you, and the file name of the compressed package is: bbiagent.img.

JAR installation method:

If your computer is installed in the Java running environment, download bbisetup.jar first, then execute the command to run production wizard,

Java -jar bbisetup.jar

MS Windows operating system, if bbisetup.jar is saved in the C: / Path, you can click on the DOS command window or click "Start" and "Run" below.

Javaw -jar c: /bbisetup.jar

转载请注明原文地址:https://www.9cbs.com/read-126280.html

New Post(0)