NFS mode installation thizlinux

xiaoxiao2021-03-06  104

Provide NFS installation server

Thizlinux7.0 installation discs have two (Disk1, Disk2) main catalog tree structure:

Create an install directory in / down, follow the Thizlinux installation disk directory structure, copy DISK1, DISK2, respectively, the corresponding directory under / install, the directory structure is as follows:

Edit / etc / exports file Share / install directory.

Start Portmap Service: Service Portmap Start [Restart].

Start NFS Service: Service NFS Start [Restart]. At this point, it is time to provide the NFS installation, and then start configuring the client (hypothesis server IP: 192.168.0.1, customer IP: 192.168.0.5):

Client configuration

This example uses a local hard disk as a boot boot (after normal conditions, after booting the machine, select NFS Image installation mode):

1. Start PortMap service: Service Portmap Start [Restart].

2. Start NFS Service: Service NFS Start [Restart].

3. Mount / Install catalog: Mount -T NFS IP: / Install / MNT / SYS

4. New NET_INSTALL directory under the / boot directory

5. Copy / mnt/sys/images/bootnet.img to / mNT

6. Mount BootNet.img file:

mount -o loop / mnt/bootnet.img / mnt / img

7.CP / MNT / IMG / * / BOOT / NET_INSTALL /

8.Vi /Boot/net_install/syslinux.cfg

Refer to the content of the file editor /Boot/grub/grub.conf

Add Title NFS_Install, edit root ..., kernel ..., respectively.

Initrd ... statement line. [Note] 1 Remove the FS related statement 2 Add text to the Kernel line, make the text mode when the NFS installation is performed

start installation...

The client restarts, select NET_INSTALL in GRUB;

Select NFS Image installation method;

Configure local IP and subnet mask, etc .: 192.168.0.5

([Note]: You must access / install to server-side sharing / installation

Configure server address and installation directory: 192.168.0.1 / installe

All the way Continue ...

转载请注明原文地址:https://www.9cbs.com/read-126884.html

New Post(0)