Wireless LAN settings easy

xiaoxiao2021-03-06  124

For the settings of the local area network network parameters, I believe that everyone will not be too unfamiliar, so whether the settings of its network parameters are the same as the previous setting method for the current popular wireless LAN In fact, the wireless local area network is not very mysterious. Its parameter setting is largely similar to the previous setting method; this is not, the content below this article will give you a detailed introduction to how to set the wireless local area network under various operating systems. parameter.

Before setting the network parameters, you should properly install the wireless network card correctly in the computer that needs to be transmitted in each unit, and adjust the distance between the computer and the computer, and the location of the computer is placed, so as not to affect the normal transmission of the signal. . Then, according to the following method, the network parameters are appropriately configured.

First, under Windows 98, Windows ME, and Windows 2000

Since Windows 98, Windows Me, and Windows 2000 systems themselves are not related to components to support the use of wireless networks, everyone must use a special wireless network management and configuration program before the setting of network parameters. Network parameters, there are currently many wireless network cards to come with the Client Manager program, and install the program correctly in the corresponding operating system according to the regular method, and then perform the following setting steps:

1. On Windows 98, Windows ME or Windows 2000 System Desktop, click the Start menu with the mouse, then execute the "Program" / "Wireless" / "Client Manager" command, open a title "Wireless client management Setting interface;

2. Move the mouse to the menu bar of the setting interface, click the "Operation" menu item, and execute the "Add" command from the subsequent drop-down menu, then select the Edit Configuration from the subsequent lower-level menu. "Options, you can display a" Select Introduction "setting dialog box on this screen;

3, in this setup box, you can click on the "Edit" button in the mouse, the system will open a setup dialog that titled "Edit Configuration"; if you don't want to use the default configuration name, you can "Select Introduction" Settings Dialog box Click the "Add" button to recreate a wireless network configuration name; 4. If you want the computer to use the "Add" function here, you can use the "Add" function to create more Different configuration files, when you select a configuration name that is related to the corresponding local area network, you can quickly set the wireless network parameters associated with the corresponding local area network;

5, then you can click the "Network Type" drop-down button in the Edit Configuration settings dialog box, select the "Peer Working Group" option from the pop-up drop-down list, continue to click on the interface with the mouse "Next" button;

6. Subsequently, the "Identification Network" will appear on the screen. In this interface, you can click the "Scan" button in the mouse so that the Client Manager program can automatically scan the current computer system can be used. For peer wireless networks, simultaneously display the results correctly; 7, in the search results page, use the wireless network searched in the mouse, then click the "OK" button in the search page to exit the search results page. Returns in a large number of "Identification Network" settings interface and continue to click the "Next" button;

8. So everyone will see a dialog that is "setting security", where you can select the Enable Data Security check box, encrypt when data transfer, ensure communication security of the wireless network. Enter the key you want to set in the Key setting bar. However, if everyone is transmitted is not important file information, it is also possible to encrypt the information. If you do not encrypt the information, then the information transfer will occupy a relatively small computer system resource; 9. After setting the security parameters, click the "Next" button in the interface to open a "Power Management" setting dialog. . If you use a laptop, you can select the "Open" option here to enable the power management function to reduce the consumption of electricity. However, once the power management function is started, then the wireless transmission performance of the local area network will decrease, then the rate of information transmission and the distance requirements of transmission will be reduced;

10, if the power management function is turned off, although the information transmission consumes a lot of power, the network's wireless transmission performance will be guaranteed, especially the transmission rate of information can reach a fast standard, and the transmission distance can be further a little;

11. After configuring the power management function, click the "Next" button with the mouse to open the "TCP / IP Behavior" settings dialog, you can use the mouse to select "Update the IP address when selecting this profile" Option, this computer can automatically complete the update of the IP address when the computer moves from a network to other different networks;

12. Finally, use the mouse to click the "Finish" button in the setting interface to end the setting of the LAN wireless network parameters.

转载请注明原文地址:https://www.9cbs.com/read-126971.html

New Post(0)