RFC66 NIC - Third level ideas and other noise

xiaoxiao2021-03-06  149

Organization: China Interactive Publishing Network (http://www.china-pub.com/)

RFC Document Chinese Translation Program (http://www.china-pub.com/compters/emook/aboutemook.htm)

E-mail: Ouyang@china-pub.com

Translator: CC8131 (CC8131)

Translation time: 2001-12-28

Copyright: This Chinese translation copyright belongs to China Interactive Publishing Network. Can be used for non-commercial use free reprint, but must

Keep the translation and copyright information of this document.

Network Working Group S. CROCKER

Request for Comments # 66 UCLA

26 August 70

Third level ideas and noise

(RFC 66-3rd Level Ideas and other noises)

In August 12, 70, I met BBN and representatives from BBN and MIT, we discussed the third level.

Other agreements.

Dial-Up The Dial-Up protocol mentioned below has passed in the conference.

The purpose of this part of the agreement is to get a path from a site (using site) and another site (service station)

The recorder is connected.

In order to trigger this connection, in the server host, use the path to connect a receiving slot US and request one to 1

Slot connection. So use UCP to send

1 4 4 1

-------------------------------------------------- -

| RTS | US | 1 | P |

-------------------------------------------------- -

| All | P | Space |

-------------------------------

By link, US US is the user's receiving slot, P is a link, space is a certain space point

Match.

The server host may decide to reject the connection, in which case it will respond with the CLS standard. However, if

If it accepts it, it will send a quasi-32-bit number through this connection, and then close this connection. This one

The number of 32-bit is the name of the server host one receiving slot. This slot and the next higher number of slots are

Save to connect to the user. So, NCP sends

1 4 1

----------------------------

| STR | 1 | US |

----------------------------

In the link 1, it will be

4

-----------

| SS |

-----------

In the link P, pay attention to the SS must be an even number.

After sending the service slot number, after SS, NCP sends

1 4 4

-------------------------------------

| CLS | 1 | US |

-------------------------------------

| STR | SS 1 | US |

------------------------------------------ | RTS | SS | US 1 | q |

------------------------------------------

| All | Q | Space |

-----------------------------

The host in use will also establish these connections, by sending

1 4 4

----------------------------------------

| CLS | US | 1 |

----------------------------------------

| STR | US 1 | SS |

--------------------------------------------

| RTS | US | SS 1 | R |

--------------------------------------------

At this point, the user should connect to the recorder on the server site.

Standard console

Second, we agree with an initial network standard console: 7-bit ASCII is transmitted to the 8-digit field

Neighboring string. These special code have been listed in the IMP Operation Manual-BBN Report # 1877.

This seems to be more difficult in PDP-10, but it will be better in other situations.

For interrupt or suspension, many systems have used at least one standard feature. For those who need another kind

Signal,

1 1

----------------

| INR | R |

----------------

It should be sufficient by controlling the connection.

[This RFC WAS PUT INTO MACHINE READABLE FORM for Entry]

[INTO THE ONLINE RFC Archives by gottfried janik 2/98]

RFC 66-3rd Level Ideas and Other Noises Level 3 Ideas and Noise

1

RFC Document Chinese Translation Program

转载请注明原文地址:https://www.9cbs.com/read-127645.html

New Post(0)