Whether the system needs to be reloaded, three laws help you:
If the system appears one of the following three cases, it should be that you consider the reload system:
1) The operating efficiency of the system becomes low, and the junk file is full of hard drives and the distribution of scattered is not convenient for centralized cleaning and automatic cleaning;
2) The system is frequent, and the fault is not convenient for accurate positioning and easy resolution;
3) The system cannot start.
Before reinstalling the system, it is best to list the backup list.
Before preparing to reinstall the system due to system crashes, you should first come back your own data. At this time, you must calm down, carefully listen to the information that needs backup in your hard disk, and write them on a piece of paper, and then back up one by one. If your hard drive can't start, you need to consider the system after starting the system with other boot disk, or copy your hard disk to other computers. In order to avoid disasters that the hard disk data cannot be recovered, it is best to develop a habit of backup important data every day.
User documentation is treasure, the first hand is good
In data that requires backup, the user document is first to consider the backup data. If you are editing or author, you need to back up your own manuscript; if you are a teacher, you need to back up your own lean; if you are a composer, you need to first back up your track ... Usually, the user's document data is put In the "My Document" folder. If the user additionally specifies the stored folder, it is necessary to back up the corresponding folder.
The Internet of the Internet is turned into a blind, only because of forgetting a favorite
Users who are often online browsing, generally collects list of addresses with personal characteristics. The next time you need to search similar content, open Favorites to easily reach your destination. When reinstalling the system, if you forget to back up your favorites, the new system installed almost only one empty favorites are for you. The good address that is previously reserved will fly, you will feel gentle. Although you may say, I have Google and other good search engines, but the working person who can be in place is relatively complicated in one step. Why pain? Therefore, you must back up the "Favorites" before reinstalling the system. The Favorites of Windows 2000 are folders under the system partition, and the middle user is different from person.
To enter high speed, back up the input method
Now, entry Chinese characters is nothing more than using a pen type and pinyin. At present, the mainstream pen type and pinyin input method has intelligent components, that is, the personalized system of the user can be automatically or semi-automatically remembered. Personal users entered Chinese characters in the word library environment with their own characteristics, and work efficiency will greatly improve. If you forget the backup method when you reload the system, the system is re-installed, and the accumulation of personalized words in the input work is equivalent to the beginning of zero. Therefore, don't forget to back up the input method user the language. User's spells are generally under systemic or folders, some input methods themselves contain their own language library backup interface, which is very convenient to use.
Email, QQ backup, eight parties can not disclaim
Chat tools such as emails and QQ are the main contact tools for our modern people. When reinstalling the system, you must do not forget to back up your own email address book and QQ friends information. The information of the email address and QQ chat friends can be backed up with the export function of the corresponding software. In order to avoid the backup of these information after the system crash, it is best to raise the habit of retail these data in the usual time, and the loss is minimized after the system crashes. In fact, Foxmail and QQ are quasi-green software, you only need to compress the two software folders and save it.
The driver is backed up, and the next time you don't need to find it.
The first feeling after the installed should be that the screen flashes so that your eyes are uncomfortable, and the speaker is not a voice. This is the reason for the image card and sound card driver installed. If there are other boards or peripherals in your system, you have to reinstall their drivers. Some users' drivers are copied in the hard disk folder, no installation discs. At this time, you need to pay special attention to it, you must back up your driver before installing the system. Don't delete the original directory, please prepare the installation disk first.
If the file under the original system can also be accessed with a boot disk, etc., after deciding to reinstall the operating system and end the backup work, don't rush to delete or format your original system, you should calm down and think about it. There is no file you need to keep in the system partition. Third, after consideration, the next thing should be ready to install the disc. It should be noted that you need to set the drive to the first start disk in the system BIOS.
Software instructions or envelopes, there are serial numbers
The installation serial number can be a key thing, if you accidentally lose your own installation serial number, and use a new installation, the installation process will not be possible. The sequence number of the regular installation disc should be in a certain location of the software manual or the disc envelope. However, if you use the beta system provided in some software collection CDs, these serial numbers may be in an explanatory text existing in the installation directory, such as sn.txt. Therefore, first read the serial number and record it for later use.
The system is out of the fault file, override installation test
If you prompt you less files when the system starts, or some files have problems, you don't hurry to format your hard drive, but you should first try to make override installations. The main point of the overlay is, first enter the security mode or start to DOS, then perform setup.exe on the installation CD or other files used to start the installer. Note To select the system file in the same directory as the original system during the installation process. After such installation, most of the problems can be repaired, more importantly, some application software previously installed can also continue to use.
