NetScreen password recovery [include OS (2 files)]
About the password recovery of NS, it is said that the version 3.0 can make username and password with the serial number, and restore to the factory settings, but many
The user tried unsuccessful:
Quote
NetScreen Technologies Inc.NS10 System Monitor V2.1Copyright, 1997-199932M SDRAM detectedSDRAM test0 passedNetScreen Technologies, IncNS10 Load SoftwareCopyright, 1997-1999Version 2.1Hit any key for Boot / Diag modeHit any key for Boot / Diag modeHit any key for Boot / Diag modeHit Any key for boot / diag modestart loading ........................................ ................................................ ................................................ ................................................ ....... Done.NetScreen Technologies, IncNS10 System SoftwareCopyright, 1997-2001Load Manufacture Information ... DoneLoad NVRAM Information ... (2.60) DoneSoftware version 2.6.0r4.1Verify ACL register default value (at hw reset). .. DoneVerify ACL register read / write ... DoneVerify ACL rule read / write ... DoneVerify ACL rule search ... DoneURL Filtering initialization doneInstall modules (004e6470,00539d70) ... done (53) load dns tableSystem config (4045 LoadedLoad System Configuratio N ............................................. ................................................ .
Because it is said that there is a number of NS10 and NS100 not supported this method yesterday, I also tried 5GT's RESET small hole. Later, all NS-10 did not support RESET holes, 2.6.0, and below are no support for serial number: Re-transfer a new OS diagnostic mode in the diagnostic mode: HIT Any Key for Boot / Diag Modehit Any Key for Boot / Diag Modehit Any Key for Boot / Diag Modehit Any Key for Boot / Diag Modeq Friends S9602 There is also a more detailed article -
Quote
NS-25 upgrade from 3.0 to 4.0 process detailed (equally to 4.0 upgrade to 5.0) NS-25 upgrade from 3.0 Upgrade to 4.0 Process Detailed 1, download TFTPServer2000 software (you can search, English website provides more download, Chinese website is almost Can't find the download). 2, install TFTPServer2000 software (if you don't want to see this forum), the installed machine must be able to communicate with NS-25, and can PING. My IP is 192.168.10.9, note this IP, and it is used later. 3. Open the program, system ==> Setup, set Inbound and Outbound to store the system image file. 4. Get the image file of the new version of OS (I got NS50NS25.4.0.0R6.0, thank you for JANKING to provide this file) and save it to the previous directory set (that is, the root directory of the TFTP server) ). 5. Use the NS-25 randomly distributed flat cable to connect the computer's COM port and NS-25 console port. 6, run attachment ==> Communication ==> Super terminal 7, just enter a connection name, choose an icon, determine, "select" Select "TCP / IP", enter NS-25 management IP (Manager-IP I am 192.168.10.2), determined, enter the username and password (if you have forgotten "NetScreen" as a username and password .8, enter the command save software from flash to TFTP 192.168.10.9 Oldos.R3.0 (file name Just take the old OS to the TFTP server root directory (that is, the directory set by the previous steps) .9, enter the command save config from flash to TFTP 192.168.10.9 Oldos.cfg Save the old settings to a file (The file will be saved to the root directory of the TFTP server (that is, the directory, file name set by the previous steps). 10, the most critical step, that is, the upgrade system: Enter the Save Software from TFTP 192.168.9 NFS50NS25. 4.0.0r6.0 to flash waited for a large string (there's a lot of lines), indicating that it is refreshing, when praying, don't stop power, after about one or two minutes, prompt to upgrade success (English, look at it). In the back Part of the exclamation, there will be a pause for a period of time (like death), don't worry, wait, don't restart the machine .11, reset reboot, then you can use your new OS. 12, I wish Good luck !!!!!!!!!!!!! Postscript: If your system can log in to the web management interface, you can also upgrade from the web interface, the upgrade process is simpler. This is no longer described here.
