2202 memory overclocking stable parameters

xiaoxiao2021-03-19  214

About 2202 performance memory is its bottleneck, the original 333 memory A64TWeaker overclocking can greatly improve performance (memory bandwidth and 3D performance increase of about 40%), but the super-stability is what we have to worry, I just tried a set of A64Tweaker's most stable setting parameters, sharing with you.

left

TCL selection 3.0

TRFC selection 12

right

2T Timing DISABLE

MemClk Frequency selected 183 *

Then press SET

After setting up, open CPU-Z You will find that the frequency will automatically increase according to the usage of memory, the system is running in the original 160MHz, and the opening program is automatically rising to 177MHz, (Note: If MemClk If the frequency is 200, it will not be automatically lifted, so be sure to choose 183 *)

In this way, it greatly improves stability while performance improvement, controlling fever, and set to boot automatic operation.

Let's test how big the performance after this setting is:

3dmark2001se: 4080 points 3200 points after SET 3DMark2003: set 890 points after SET 1180 points SiSoftware Sandra 2005: SET 1962/1963 SET 2492/2493 Optimization Master V6.7 graphics card and internal deposit item: set before 200 points after SET 240 points

The related pictures of this topic are as follows:

转载请注明原文地址:https://www.9cbs.com/read-130221.html

New Post(0)