DLINK DI-704P router printing function, resulting in HP LaserJet 6L printing "short paper" failure

xiaoxiao2021-04-02  205

The newly purchased DLINK DI-704P router has a print service function, so it is turned on through the drive disc (here there is a problem I can't understand is the 804 wireless router written by this DLINK DI-704P router random. (USB) Use the disc and ask the dealer to get a reply is universal!). According to the instructions Install the printer, use the HP LaserJet 6L laser printer to print, there is a strange phenomenon, one printing an Excel file, the print light (green light) flashes a few times (yellow light flashing) Show the lack of paper, restart the printer You can find paper, but the problem is as if it is. There is no problem with printing a Word file (Word file is used to test the printer, so there is very little content). The next day, I found the maintenance personnel, demonstrated the phenomenon, and he printed a test page, no problem. He said that it is a computer problem and left. So I can only find a computer, after the Nth printed Excel file, I accidentally read the status information left on the left of the selected printer, and the red word is very eye-catching "printer memory." The first feel is the printer setting problem. Change the following settings: Printer Properties -> Device Settings -> Installable Options -> Printer Memory ... The current value is 1024KB, watching the maximum: 9216kb, change to it, play a few, normal However, I feel that the print speed is very slow.

Invasiveness can only be replaced back to the local area network printer sharing method, here there is a problem that needs attention, that is, when deleting the printer installed on the router port, the system is replaced when the system is replaced with new driver replacement, must To choose replace, otherwise it will be unsuccessful. The system defaults to retain the original driver (and it is also recommended), because I started to choose a reservation several times, so I still thought that the printed machine was broken, and many twists and turns finally found the reason.

So the print service function of this DLINK DI-704P router cannot be used.

In addition, afterwards online, I found out that the printer yellow light flashed and the bright did not represent one meaning, and the bright is a lack of paper, flasher is insufficient. If I know it before. . . !

转载请注明原文地址:https://www.9cbs.com/read-131348.html

New Post(0)