D41JCT-LS installation and configuration (under Linux)

zhaozj2021-02-16  82

D / 41JCT-LS installation and configuration (under Linux)

1. Download Linux Streams (LIS) software, version lis-2.13.9.tgz, address http://www.gcom.com/home/linux/lis/index.html (must be 2.13.9 version, manual on note Ming must be this version)

2. Using Redhat Linux 7.3, the kernel is at least 2.4.9 or more (so SYSTEM RELEASE 5.1 ​​can be installed) (Note: Redhat linux7.2 core version is 2.4.7, you can also upgrade the kernel and then use) Dialogic can support Redhat Linux 7.1 and 7.2, but the driver takes 2.4.9 or more kernels. After upgrading, you can also support the confirmation of GCC and kernel version: rpm -qa | grep gccrpm -qa | grep kernelredhat linux 7.3 Under the next version: GCC-2.96- 110 Keernel-Source-2.4.18-3

3. Install listar -xzf lis-2.13.9.tgzcd LIS-2.13make (then is a series of configuration. All press the default value, you must ensure the directory of the kernel source code is /usr/src/linux-2.4. XX) Make Install Confirm: There is a LIS directory in the LS -L / USR / SRC, indicating that the installation is successful.

4. You need to set up boot loader. Generally there are two kinds of grub and lilo, only for GRUB to explain vi /etc/grub.cong for editing: kernel /boot/vmlinuz-2.4.18.3 Ro root = / dev / HDA10 MEM = 255m256m memory will write a 127M parameter of 128M on the memory of the 255M parameter 128m, and the value written on the manual is saved and restarted after the value of the manual.

5. Use the "System Release 5.1 for Linux" CD to install Mount / DEV / CDROM / MNT / CDROMCD / MNT/CDROM / MNTALL.SH (which can use the Echo $ shell command to see the position of the shell / bash)

6. You can only need 1 and 8 when installing, other items do not need to be installed, otherwise it will be a bit problem (ie, install Springware Software and Dialogic Documents).

7. Fill the / usr / dialogic directory after installation can go to /usr/dialogic/docs/html_files/index.html to see how configures can also be completed as follows

8. In the run ./config.sh directory under the disc appears:.. Dialogic System Release 5.1 for Linux CONFIGURATION This is the configuration tool for Dialogic System Release software You will be asked to supply information for configuring Dialogic software Does the system contain a DM3 TYPE BOARD (Y / N, Default = Y)? To select N, because D / 41JCT-LS is not a DM3 type board.

9. Then this must be selected, because it is Springware Board: does the system contain any other type of intel Dialogic Board (Y / n, default = n)? After SNMP does not install, then: Copying Driver Files ... Drivers for LiS will now be built and installed. A makefile will be invoked, which may take several minutes to complete. Many lines of makefile output will be displayed, some of which may indicate a warning. This is normal. Press ENTER to build and Install drivers ... Wait for installation and configuration after entering! The Starting Springware Specific Configuration ... Configuring Springware Drive Will this System Use "ISA / BOARD LOCATOR Technology" Boards EG, D / XXE, D / 240SC -T1 boards (y / n, default = y)? To select n, before confirming that the board is inserted into the PCI slot, then in a series of options: config information for d / xxjct-u Boards ___________________________ (Includes D / 42JCT-U, D / 82JCT-U) Hit Return to Accept Default Values, Which Are Listed In () at Each Prompt ... Enter the number of d / xxjct-u Boards in the system (0): Select Default The value until D / 41JCT-LS appears, only in my machine A board, so select 1 and select A-LAW or U-LAW, to choose A-Law (this is the standard of Europe and China, the default is North America and Japan standards)

11. For voice applications, to change the /usr/dialogic/data/voice.prm file, follow the instructions to remove the comments of the previous line # If there is no SCR application, you don't have to change.

12. Test it with the detect command: Detect My board is: AUID | CT Platform | PCIBus | Pcislot | thumbwheel | log id | Serialnum | Name2 Springware 2 12 0 0 hk008152

13. When starting the application, it has been loaded. If you need to end the startup, you can run the dlstop command in the / usr / dialogic / bin directory, start the dlstart command, if there is no problem, explain the installation and configuration Fully successful.

Reference: [1] System Release 5.1 for Linux Online Bookshelf [2] Intel? Dialogic? D / 41JCT-LS Four-port Simulation Fusion Communication Board Card, http://www.ctiforum.com/train/intel/product/Product01_018 .htmdcyu Written on July 10, 2004

转载请注明原文地址:https://www.9cbs.com/read-13872.html

New Post(0)