Use Windows comes with ICS function sharing Internet access

zhaozj2021-02-16  102

Microsoft started from the second edition of Windows 98, and the shared Internet service is built into the operating system. The self-contained shared Internet service settings of Windows is relatively simple, and the client does not require a complex setting, which is not very large for home users. The company is a simple and practical function. This article will share the Internet as an example with Windows 2000, describe how to implement other computers sharing access through this feature. Installing Internet Sharing Windows 2000 Internet Sharing Features A default is installed in the system without having to install it. Setting up the Internet share requires the Internet sharing feature of Windows 2000, while making certain settings can be used. The specific steps are as follows: Network and Coaching (1) On the computer [desktop], right-click [online neighbor], click the [Properties] menu of the pop-up menu, enter the [Network and Coaching] window, as shown in Figure 1 Generally, the local connection 1 is generally displayed. Local connection 2, the author is changed to the access to the local area network, and the connection to the network is changed to broadband; enabling the sharing connection (2) Right-click [Broadband], Select the [Properties] menu in the pop-up menu, pop up the broadband connection Properties dialog box, click the [Sharing] tab, check the Internet connection sharing of this connection, click the [OK] button; Internet Connection Share prompt (3) At this time, the pop-up will be displayed. When the Internet connection sharing is enabled, your LAN adapter will be set to use the IP address 192.168.0.1. Computers may lose connection with other computers on the network. If these computers have static IP addresses, you should set them automatically to get the IP address. Do you really want to enable Internet connection? 】, The prompt information has been understood very well, it changed the IP address connected to [local] to 192.168.0.1, click [Yes] button to confirm; [Note:] If the local connection IP address is not this network segment After the change, other computers on the network will not be able to access the machine, and the solution is to replace the IP address of other computers to 192.168.0 network segments, the IP address can be, the subnet mask is 255.255 .255.0, but the IP address of each computer is not repeated. View this machine's IP address (4) Click the [Start] menu, then click "CMD" in the open text input box, enter the DOS command state, enter "ipconfig" at the DOS prompt, You can view the current IP address, you can see that the local IP address has been changed to 192.168.0.1, and the broadband address is automatically acquired.

转载请注明原文地址:https://www.9cbs.com/read-14178.html

New Post(0)