Bad unit format:
Close Compile terminated by user error Compile terminated by user Constant expected requirements constants Constant expression expected Constant expression Constant expression violates subrange bounds constant expression beyond the sub-sector range Constant object can not be passed as var parameter constants Constant object can not be passed as a parameter or type variable constant or type identifier expected identifier constants can not be used as open array arguments can not be used to open the constant array parameters Constructing instance of '
Use Dispid clause only allowed in OLE automation section DISPID clause can only be used in OLE automation section Division by zero the divisor is zero Duplicate case label CASE repeated Duplicate tag value numeral duplicate flag value Dynamic method or message handler not allowed here is not here Allow a dynamic method or information handler Dynamic Methods and Message Handlers Not ALLOWED IN OLE Automation section does not allow dynamic methods or message handlers Element 0 inaccessible - Use 'length 0 cannot access - use the LENGTH SETLENGTHError in numeric constant or numeric constant error EXCEPT or FINALLY expected or required EXCEPT FINALLYEXPORTS allowed only at global scope EXPORTS allowed only expression has no value expression has no value in the global scope expression too complicated Expression too complex Field Definition Not ALLOWED IN OLE Automation Section does not allow domain definitions in the OLE Automation NOT OFTER DETHODS or Properties without allowing domain definitions Field or methodiD Identifier Expected requirements Domain or method identifier File Not Found:
No File Type Not ALLOWED Here This does not allow file type for loop control Variable Must Be Simple Local Variable for loop control variable must be a simple local variable for loop control Variable Must Have ORDINAL TYPE for loop control variable must be the order type for While loop EXECUTES ZERO TIMES - DELETED FOR or WHILE loop Perform zero - Delete for-loop variable '
text> Inline assembler stack overflow inline assembler Inline assembler syntax error overflow inline assembler syntax error Instance variable '
Description and reference, but not set Label Expected Requirements LEFT SIDE CANNOT BE Assigned to 值 l (more 255 characters) Row too long (more than 255 characters) Local Class or Object Types Not ALLOWED does not allow local classes or object type local procedure / function '
Not defined Not enough actual parameters not enough actual parameters Number of Number of elements differs from declaration elements illustrate different Numeric overflow numeric overflow Object or class type required Object or class types Object type required Object type Only register calling convention allowed in OLE automation Section only allows registers in OLE Auto Sends to call aggregate OPERAND SIZE MISMATCH Options Size Match Operator Not Applicable To this Operand Type operator Not used by this Operation Object Type ORDER OF FIELDS in Record Constant Differs from declation in record constants Domain order and description Different Ordinal Type Required Requirements Sequence Type Out of Memory Memory Overflow In Conversion or Arithmetic Operation Translation or Arithmetic Operation Automatic virtual method for overriding automated virtual method '
You can not specify DISPIDPACKED not allowed here allowed here PACKEDPointer type required needs a pointer type Procedure can not have a result type process can not have a result type Procedure DISPOSE needs destructor process DISPOSE need destructorProcedure FAIL only allowed in constructor Procedure FAIL only allowed Procedure in the constructor method NEW needs constructor procedure NEW needs constructor pROCEDURE or fUNCTION expected in claim pROCEDURE or FUNCTIONProcedure or function name expected claims procedure or function name program or unit '
Might Be Undefined Function
END. Text This Form of Method Call Only Allowed for Class Methods This method is allowed to allow class method this form of method call only allowed in methods of derived types This method is only allowed to be exported type of method this type can not be initialized this type can not be initialized thread local variables can not be ABSOLUTE thread-local variables can not be ABSOLUTEThread local variables can not be local to a function or procedure thread-local variable to the function can not be a local too many actual parameters too Multi-active parameters TOO MANY CONDITIONAL SYMBOLS Too many condition symbols Type '
Need to initialize - Not allowed to record Type Expected required TypeType Not ALLOWED IN OLE Automation Call In OLE automatic call, the type TYPE OF Expression Must Be Boolean expression must be the type of Boolean Type Of Expression Must Be Integer Expression must be of type INTEGER type TYPEINFO standard function expects a type identifier TYPEINFO standard function type identifier TYPEOF can only be applied to object types with a VMT TYPEOF only be used for a VMT object types types of actual and formal var parameters must be Identical-shaped Participate in the argument must be consistent undeclared identifier: '
Is Declared But Never Used In '
The error is divided into the following three categories: * I / O error: Error number is 100-149 Number Description -------------------------- ------------------------------ 100 Disk read errors, if you want to read the end of the format file, 101 disk write Error, if the disk is full, by Closefile, WriteLn, or Flush Report 102 does not specify a file, if the file variable is not assigned by Assign or AssignFile, it is not opened by reset, shutrite, append, rename and ERASE report 103 file, if the file is not Open, by Closefile, Read, Write, Seek, EOF, Filepos, FileSize, Flush, BlockRead, or Blockwrite Report 104 Enter files Unmopted, Reported by Read, Readln, EOF, EOLN, SEEKEOF or SEEKEOLN The output file is not open, and the text file is reported by WRITE and WRITELN. The text file does not use the console application to generate 106 invalid data format, and the data format read from the text file is incorrect by the read or readln report.
* Fatal error: Error number is 200-255 Number Description ---------------------------------------------------------------------------------------------------------------------- ------------------ 200 Zero 201 Range Check Error 202 Stack overflow 203 Stack overflow error 204 Invalid pointer operation 205 floating point over 206 floating point Overflow 207 Invalid Floating point operation 215 arithmetic overflow error 216 Access Illegal 217 Controls - C218 Authorization command 219 invalid TypeCast220 invalid variant TypeCast22 invalid variant operation 222 No variant method Call Dispatcher223 Cannot establish variant array 224 Body does not include array 225 variant array boundary error 226 TLS initialization error * Operating system error number description ------------------------------ -------------------------- 1899L cannot generate endpoint mapping database 1752L cannot perform operation 1751L Entry point illegal 1753L endpoint mapping no more available Endpoint 5L Access Illegal 1331L account is currently not available, so you cannot log in to the 1793L user account expiration 1327L username is effective.
However, some restrictions cannot be checked that the user's 57L network adapter hardware error 1379L specified alias existing 1344L allocation for updating memory blocks is less than 85L local device name has been using 183L attempt to establish existing file 1074L system is currently the latest and best Configuring Run 7L Storage Control Block is destroyed 534L Operation Results Beyond 32 Bit 174L File System Does not support lock type Atomic change 199L Operating system Cannot run this program 160L Parameter string of DosexecPGM The incorrect 22L device can not recognize command 1361L security description The comparable format 66L network resource type incorrect 1200L specified device name invalid 119L system does not support request command 10L Environment incorrect 193L% 1 is not a valid Windows-based application 11L attempt to load an incorrect format program 1346L specified The analog-level invalid or no required analog-level 1340L attempts to establish a inherited ACL or does not have inherited ACE24L program specified command length incorrectly 1365L login segment and required operation status inconsistent 67L network name Can't perform a 58L specified server cannot perform request Command 53L Network Path No found 161L Specified path name invalid 230L Piping status invalid 1206L network connection protocol Damage 1204L Specified network provider name invalid 60L remote adapter is not compatible with 159L thread ID Address incorrect 1349L symbol object type Improper 20L system Find the specified device 2202L specified user name invalid 1348L request determined information class is an invalid 1009L Configuration Record Database is destroyed 1010L Configuration Record Key Invalid 1102L encountered a tape head or partition 1076L Current boot has been accepted for the latest control settings 109L pipe end 111L file name too long 1111L I / O bus Reset 170L Request Resources in use 142L At this time, the system cannot perform Join or Subst120L input API can only work in Windows / NT mode 1003L for some reasons that cannot be completed 171L lock requests to provide undo displacement Unconverted 266L cannot be used to use 1407L can not find Windows class 1368L means to try to pass The simulation of the named pipe has not read 82L cannot generate a directory or file 1205L cannot open the network connection protocol 1351L does not contact the domain controller or in the domain object is protected, so it cannot access the necessary information 1310L delegate group cannot prohibit 1347L to try to open anonymous symbol,
The anonymous symbols cannot open 1011L Configuration Record Key Can't open 1012L Configuration Recording Key Can't read 1013L Configuration Record Key Can't Write 1021L Attempt to establish a stable sub-key 129L application% 1 under variable parent keywords 129L application% 1 Running a 1436L child window in Windows mode No Menu 1059L specifying a subordinate service slave 1410L class existing 1411L class does not exist 1412L class still in the open window 1418L thread no open clipboard 1201L device is currently not connected, but to remember The connection 1421L did not find the control ID1121L because the timeout has arrived, a series of I / O operations completed 23L Data Error 16L Directory Unable to delete 1065L Specified databases There is no 1425L passed to the ineffective HDC1051L Termination control has been sent to other independent operation services. The service 1435L does not destroy other threads generated object 55L specified network resource no longer valid 1202L Attempt to remember the previously remembered device 2404L device is used by the activation process, cannot be disconnected 1107L When loading the tape, the tape is not found Subregional information 145L directory non-empty 144L directory is not the subdirectory of the root directory 130L attempts to use the file handle to open the disk operation 267L Directory name is not valid 157L paragraph is lost, can not lock 107L Since the switch is not inserted, the program terminates 1393L disk structure damage, no In reading 112L disk, there is not enough space 1127L even if it retrys, the access hard disk also failed 1126L when the hard disk is accessed, even if retry, the access calibration operation also failed 1128L even if the disk controller is reset, access the hard disk also failed 1114L DLL initialization routine failed 1356L specified domain existing 1357L attempting to exceed the limit of each server domain 1810L specified domain name or secure ID The 108L disk is not consistent 108L disk in use or by other processes to lock 1221L work Ethnic or domain name has been used by other computers on the network with a rename 1078L name on the network has been used in server name or service display name Use 196L operating system to run this application 994L to EA's access illegal 276L in the installation file system The EA file is damaged 255L EA inconsistency 277L EA menu on the EA file of the installation file system, the EA menu, 275L EA, is not suitable in the buffer 282L installation file system does not support the extended attribute 1100L in the operation, the tape tail flag 203L system cannot Find the entered environment option 1129L encountered the physical tail 1501L of the tape, no log file event,
So the event login service does not start 1503L Event log file has changed between 1500L EventLog login files to break 1064L, an unexpected 101L specimal signal appears when the control request is processed, the 192L operating system cannot run% 11208L Extended error 83L INT24 failure 1063L Service Process cannot be connected to the service controller 1392L file or directory is corrupted, can not be able to read the 80L file There is a variable, so the open file is no longer a 2L system does not find the specified file 1101L tape Acquisition David file sign 206L file name or suffix too long 1125L floppy disk controller returned to the uniform result 1122L Did not find ID address flag 1123L floppy district ID Domain and floppy disk controller address does not match 1124L floppy controller reports unable The operation of the error 1007L requested by the floppic drive in full screen mode does not perform 31L connected to the system is not normal 1360L Wall Access Type Contains 1429L in the access shield 1429L This exception branch can only be specified for the global setting 1318L There is a 39L disk full 38L arrival file 1428L has no module processing, which cannot set a non-local exception handling 1431L unusual branch No installation 1409L hot key has been registered 1419L hot bond No registration 1441L All deferWindowsPoshwnd must have the same parent 1324L When updating password, The return status indicates that the value of the 202L operating system containing the unauthorized value 202L operating system cannot run the% 1122L. The data area that is transmitted to the system is too small 1358L because the catastrophic media error or disk data structure destruction causing the requested operation 1383L. The inconsistent 1359L SAM inside the LSA database encounters an inconsistent incorrect internal database, preventing further operation of SAM from further operation of 1800L 1448L scroll strip range greater than 0x7FFF1338L security descriptor structure invalid 198L operating system cannot run% 1180L system detected incorrect Segment No. 1799L Specifically 1352L SAM Server Status error, cannot complete the desired operation 1057L account name invalid or does not exist if the 1052L control invalid 1071L specified service data lock invalid 1213L designated service name format is invalid 1215L The specified shared name format is incorrect 1449L showWindows command invalid 1337L SID structure invalid 209L released signal incorrect 1439L parameter invalid 189L operating system Unable to run% 1188L Operating system Unable to run% 11335L Sub-author limit value 114L target internal file identifier incorrectly 1444L Thread ID invalid 1784L provides user buffers to request operation failure 118L Write verification switch parameter value incorrectly 1400L window processing invalid 1329L user account limit,
You cannot log in from the source workstation. Due to the I / O device error, the request cannot complete the 996L overlapping IO time is not in the signal state 997L overlapping IO operation in the processing 197L operating system currently configurable to run application 1119L Can't open and share with other devices IRQ device, at least one other device of this IRQ has been opened 147L without sufficient available resources to process this command 133L Since the drive already contains connection, the Join or SUBST commands cannot use 134L to use Join or SUBST on the connected drive Command 146L The path specified by the command is in an alternative drive directory 135L attempts to use the JOIN or SUBST command 194L operating system in an alternative drive. The 194L operating system cannot run the% 1138L system attempt to replace the alternative directory 140L system attempts to replace the replacement Directory 1430L Daily Anomaly Handling 1018L On the registration key with delete flags 1020L attempts to set the symbol connection 154L input consistent limit, the first 11 characters Write on a disk, the remaining characters automatically delete 1322L Requests Operation is disabled or deleted the latest administrator account 1434L This list box does not support the Table 1416L List ID No 1390L attempts to modify the user password, but no required LM The password 1303L coupled to the local RPC, requiring the user-channel key 167L to try to lock the file failed area 33L Since the other process has locked some files, the file cannot be locked by the 212L end lock, so the 1502L event login file is full 1326L Since the username or verification information is incorrect, try to log in to the invalid 1380L request login type (such as network, service, etc.) is not authorized by the target system 1366L login verification. Use 1363L attempt to start a new voice management program or use the type of LSA login (such as network, service, etc.) requested with the LSA login (such as network, service, etc.) without authorization 1334L without more allocating LuID164L can't generate more threads in the system. 1110L Drive Media Change 1378L Specified account name is not an alias member 1320L specified user account already in the specified group account or because there is a member in the group, can not delete the user 1321L specified by the 1377L member 1321L Account is not a member 1374L of the specified group account 1374L Since the group is a basic group, the member cannot delete 208L stroke file name symbol * or? Enter incorrect or specified global file symbol more 126L cannot find the specified module 234L needs more Multi-Data 1120L a series of I / O operations are written to the serial port operation 317L system You cannot find message number 0x% 1 message 131L attempt to move file pointer at the location of the file header 215L can not nested to log in ,
But the network login service does not start 88L network write failed 64L specified network name no longer valid 65L network access illegal 54L network in busy 6118L This workgroup server list Currently unable to close 1104L in the process in the process, Arriving Data Sign Tail 1309L Attempting is operated by operating analog symbol 1391L ACL on a thread that is currently not in an analog customer does not contain the inheritable component 1019L system cannot assign the volume of space 1807L used by the recording file. The account number used in the internal domain, using a normal account or Remote user account to access accounts used by the server 1809L In the server traveler, use normal account or remote user account to access the server 1311L Currently no login server to serve the login request 1808L in the workstation account In the use of normal account or remote user account to access the server 1112L Since there is no medium in the drive, the tape query failed 18L no more file 259L No more available data 113L No more available internal file identifier 1203L Network provider receives a given path 2138L No network or network is not started 89L This time the system cannot start another process 1302L. There is no specified limit 1447L window. No scroll bar 1350L attempt to operate the object to operate 1116L because there is no shutdown In the process, trying to abandon the shutdown failure 205L In the command subtree, there is no process with signal handle 62L stores the space for the user to wait for the print file. 1376L specified or name does not exist in the specified domain. There is no 1312L specified group. The login path does not exist, and the new member that may have been terminated from 1387L cannot be added to the validation specified in 1364L in the alias. The unknowns 1313L specified privilege does not exist 1317L specified user does not have a 1437L window does not have a system menu 1008L attempt to reference the symbol 1786L workstation does not have a secret 1787L domain controller to the workstation No account 1113L to the target multi-byte code page exists Unicode characters do not map 1394L to the specified login path No user-channel key 125L disk no volume label 1417L did not find wildcard 998L to invalidate the memory location 1445L DEFMDICHILDPROC1332L Map The information is not changed 1300L All permissions are assigned to the caller 1442L window not a child window 2250L network connection does not exist 1207L cannot enumerate the non-container 26L specified disk. No enough space. The command 1130L does not have enough space to process the command server 136L system attempt to delete Unconnected drive 158L segment The action of the 1362L request is only limited by the login process, the calling process is not registered as the login process 288L to try to release the mutually exclusion 21L driver that is not being owned by the caller, no ready 1017L system attempts to load or recover files In the registration,
However, the specified file format is incorrect 17L system does not move files to different drives 137L system attempt to delete the no alternative drive 50L does not support the network request 1022L change request is completed, and the information is not returned to the buffer buffer. Call Require analog files to find the modified 1386L does not provide the necessary NT cross confidential password and try to change the user password of 1304L Windows in the security account. The password is too complex, and it cannot be converted to a network password for Windows (this password Returns NULL String) 110L system You cannot open the specified device or file 2401L with open file or request in connection period 995L due to thread exit or application request, I / O operation Abandon 28L printer without paper 84L Processing This request does not have enough space 14L processing The operation does not have enough space 1105L tape no partition 1330L user account password has expired 1325L In the update password, the state indicates that the path specified by some password update rules 148L is now not available to the 3L system cannot find the specified path 231L all the pipeline entity Busy 535L on the other end of the pipe has a process 536L wait for the process to open the other end of the pipe 233L in the other end of the pipe does not process 1446L drop-down menu Activated 1131L has detected the potential deadline condition 63L To print the waiting file to be deleted 1802L printer There is a 1795L specified print driver installed 61L print queue Full 1415L Use the local Dialog window word 1314L request permission client without 127L specified procedure No 1067L process suddenly terminates 30L system You cannot read 72L from the specified drive 72L specified The printer or disk drive is suspended 1794L Heavers In use, file structures or files that cannot be unloaded 1015L registration files or files cannot recover 1016L registration initialization I / O operation There is an unrecoverable error, registration cannot complete read, write and other operation 1014L contains system One of the files of registration data has been restored successfully 201L operating system You cannot run% 151L Remote computer is not available 1220L to try to establish a LAN management server word,
However, many 71L network requests have not accepted 1816L Processing This command does not have enough quota 1812L Specified image file does not include the resource part 1815L specified resource language ID in the image file Can't find 1814L specified resource name in the image Can't find the resource type specified in the file in the image file, less than 1306L is found in the image file. Two version levels are not compatible with 207L 2 ring stack in the use of 200L code segments that cannot be greater than or equal to 64KB1370L in the registration transaction commissioned. 1369L registration Transaction Status and Request Operation Incompatible 143L System You cannot replace the same drive or directory 1440L Screen The 1382L secret length exceeds the allowed maximum length 27L driver does not find the requested sector 25L drive Cannot find the area specified on the disk and 132L The file pointer cannot be set at the specified device or file 102L signal settings that cannot be turned off 187L specified system signal name without finding 105L of the previous main relationship of the signal has been terminated. The 121L signal is inserted to 106L in the drive 1 inserted into the disk 1118L serial The device is not initialized, and the serial device does not have a 1341L GUID Assignment server. The 1811L server is prohibited from using the 1811L server, and the 1342L cannot be unloaded. The GUID allocation server 1056L service entity is running 1061L service at this time that the control message 1055L service database lock 1075L Debut Service does not exist or have made delete flag 1068L slave service or group launch failed 1058L Specify service prohibition, can not start 1060L Specifies that there is no 1073L specified service that has existed 1069L Due to login failure, service cannot start 1072L The specified service has been deleted Sign 1077L boot without starting service has started 1054L Can't generate thread 1062L service that does not start 1053L service The startup does not respond or promptly controls the request 1066L service has returned a service specified error code 1070L is startup After the service hangs the certificate provided by the launch wait state 1219L and the existing certificate set conflict 1433L LB_SETCOTCOUNT to the non-slow list box 1103L tape reachable setting flag 36L open shared file too much 70L remote service pause or start-up 32L Since the file is used by other processes, the process cannot access 1115L system shutdown in processing 162L signal already suspended 156L accepting process rejection signal 1301L to map some of the information is not transmitted 1371L attempts to incompatibility with built-in account is incompatible with a built-in account The operation of the 1372L request cannot be executed on the specified group, because its built-in special group 1373L request cannot be executed on the specified user, because its built-in special group 1001L is too deep,
Stack overflow 141L system Attempts to Subst a driver to an alternate drive Directory 139L system Attempt to replace a driver to a directory 0L operation successfully completed 999L Access paging file error 150L system tracking information is not specified config.sys file Middle or tracking does not allow the 210L signal handle without setting 1406L CREATEWINDOWS failed, establishing a top-level window 1375L of the WS_CHILD class attempt to establish a symbol as a basic use, but the symbol is already in use. A basic symbol 56L has reached the network bios command Restrictions 1384L In trying to log in, the number of secure ID1333L requested by the user's secure stacking set is not available in a single assignment to allocate too many dynamic connection modules to the program or the dynamic module 152L has set too much signal. 68L exceeded the name limit of the LAN network card 4L system You cannot open this file 298L to signal too much mail 1381L can store the maximum number of secrets that can be stored in a single system Before 103L signal cannot be reset to 100L cannot establish another system signal 69L network BIOS road beyond 1389L Specifies that too much SID155L cannot establish another thread 1790L network login failed 1788L between the main domain and the trusted domain failed 1789L between the Trustee relationship between the workstation and the main domain failed 1108L attempt to lock the lack of pop-ups Medium failed 59L show unexpected network error 1796L Specified processor unknown 1798L print processor unknown 1797L print driver unknown 1305L encountered or specified version of the version unknown 1785L disk media unrecognizable, may be unformatted 1005L Volume does not include the identification file system 1316L specified by the user already exists 240L word to cancel 128L No waiting sub-process 1423L window is not a command box 1420L window is not a valid dialog 1408L invalid window, belonging to another thread 29L system cannot be written The specified drive 19L media write protects the wrong disk in the 34L driver, inserts% 2 (volume series% 3) into the drive% 1 1323L When the password is updated, the status indicates that the password value is incorrect-11L invalid input. Handle-2L invalid input handle -7L input parameter exceeded range -5L LZFILE file structure memory insufficient -6L incorrect global handle -3L damaged compressed file structure-4L output file space insufficient -8L unrecognizable compression algorithm 0L no error 1768L Additive Error 1713L Server is listening from 1711L Object UUID Registration 1746L connection does not include authentication information 1726L remote process call failed 1727L remote process call failed,
Cannot perform 1791L Remote Procedure Call has been in the thread tension 1764L does not support request operation 1720L cannot generate an endpoint 1740L endpoint Repeat 1760L Entry Existing 1761L Inlet No 1769L The floating point operation of 1769L is floating on the server is zero 1771L to float on the server Point over 1770L appears on the server, the floating point overflows 1898L group members did not find the 1755L entrance name Improve 1759L interface did not find 1766L in the RPC 1744L security context invalid 1702L connection handle invalid 1734L array boundary invalid 1736L endpoint format invalid 1736L Name syntax invalid 1727L network address invalid 1724L network option invalid 1900L object universal unique identifier is an empty 1704L RPC protocol sequence invalid 1700L string connection invalid 1705L string UUID failure 1733L flag invalid 1709L timeout value invalid 1756L version option invalid 1742L call Maximum number Too little 1762L Name Service Unavailable 1718L No Connection 1725L No Remote Procedure In This thread No security context available 1735L Nothing 1735L connection does not include entry point name 1806L does not have enough connection 1719L No Agreement Sequence 1714L No Registration Protocol Sequence 1715L server does not listen to the 1710L object UUID Nothing found 1721L Not enough resource completed the operation 1745L process number Over the range of 1728L Apc protocol error 1744L RPC protocol sequence does not find 1703L does not support the RPC protocol sequence 1731L server does not have enough memory to complete the operation 1723L server is too busy,