The configuration process of the Samba server under Linux (zengl@ics.ic.ac.cn) 1. Find the /etc/samba/smb.conf configuration file, set the Workgroup = Hcycom for the [Global] field this is the definition global parameter, Hcycom is here It is the name of the working group below to connect NT, 98. 2. Add a line of NetBIOS name = zengli "zengli", the name of the Samba server, that is, the // zengli to connect; Server String is the content displayed when you search for your host, not use. 3.Host allow = 192.168.1. SMBPASSWD6. Remove the annotation of [TMP] and the following lines of code. Where Path = / TMP is Linux shared directory 7. You can open another shared directory [public], PATH = / var / ftp / pub saves the SMB.conf file, and then 8. Use the testparm command to see if the configuration is correct. 9. Add Samba users and passwords with the smbpasswd -a username command 10. Restart the Samba server in /etc/init.d/smb RESTART -------- 11. Configure network protocols and services in NT / 98. : NetBeui, TCP / IP, Microsoft Network User, and log in to the 98 / NT system in the Samba user under Linux, the working group (should be specified for the Workgroup in smb.conf), this is not very certain :) 12. All * .reg files from Linux / USR / Share / Doc / Samba-XXX / DOCS / all * .reg files come over. The registry information is added to the system according to the own system is 98 / NT. 13. On C: / Windows> Net X: // DODO / TMP, you can connect the Samba server, of course, the method of mapping the drive can also be used. ------------
