The method of restoring Windows 95 dual startup is introduced. However, it is really not new to play the computer first, don't look at it. Published in the fourth edition of "Student Computer World" on April 27, 1998, there is a release of applement, this is the release after the deletion, this is the first article published in my life, the draft fee 25 yuan.
====
Dual startup started in Windows 95, the dual selection startup of the old DOS and Windows 95. Press "Starting Windows 95 ..." when booting "Starting Windows 95 ...", press the old DOS; press F8 to start the menu, select Windows 95 or DOS startup. However, the dual start of Windows 95 sometimes expires. The main phenomenon is: pressing F4 after power on; pressing a non-old version of the DOS in the menu that appears in F8; pressing the system prompts to boot DOS failure after the F4; select the old version of the old version of the Old version of the Old version of the system prompt DOS guidance failed. These conditions have the following mains: 1. Upgrade installations when installing Windows 95. 2. Although the method "installed in other directories" is used, an unexpected DOS file is destroyed during use. The double start is banned in the 3.msdos.sys file. 4. When installing Windows 95, it is the installation of the "Windows 95 Standard Edition" starting machine on the new machine, there is no DOS system on the original machine. So, how to recover after losing the double start function? First, for the case 3: "Double start in MSDOS.sys." The case, simply modify the MSDOS.sys file, make sure there is "Bootmulti = 1" in this file. For other cases, the following method can be repaired: First find a computer that correctly installs the DOS system or prepares a first number in the DOS installation disk, which will top IO.SYS, MSDOS.SYS and Command. The COM file is renamed IO.DOS, MSDOS.DOS, Command.dos, and copy it into the C-root directory of a computer with a Windows 95 system. Next, establish a suitable config.sys and autoexec.bat files, which are renamed CONFIG.DOS and AutoeExec.dos, and copy it to the root directory of the C drive. Finally, BootMulti = 1 line should also be added to the MSDOS.sys file. Restart your computer, the dual start function is restored.
