SCO5.0.5 installation steps

1. Installation Preparation:

[1] Prepare the installation medium, including the guide disk and the medium disc.

[2] Some network cards need to set up addresses and interrupts in the DOS environment to be used. Be pre-set before installation.

[3] The network should be guaranteed before installation.

Second, insert the SCO SopenServerBoot Disk floppy drive into the floppy drive, turn on the host and display power, start the machine.

Third, when the boot: prompt appears, press Enter to start the system.

Fourth, the startup is completed, the bottom of the screen appears as follows:

When you press the button to enter the next screen.

5. This screen is some introductory information, press the key button to enter the next screen.

6. Select the installation media:

Move the cursor, high brightness accept Above Choices, press the to accept the default settings, go to the next screen.

7. Insert the SCO OpenServer disc into the optical drive, move the cursor high brightness OK, press button, will check the installation media, please wait.

8. Select the keyboard to select the default setting, high brightness accept Above Choices, press the key button to enter the next screen.

Nine, some introductory information, press the button to enter the next screen.

Ten, enter the system's authorization code information, high brightness accept Above choices, press the button to enter the next screen.

11. Select high-brightness Fresh, press to fully install, enter the next screen.

Twelve, select the high brightness OK, press the button to enter the next screen.

Thirteen, enter the following information:

[1] System name: Host name.

[2] Domain name: Enter the domain name.

[3] Security profile, choose Traditional.

[4] Time Zone: Press the space button, and the post screen prompts the title "Time Zone" dialog. Move highlights to "Geographical Area:", enter spaces, and the screen prompts a regional list box. Use the up and down button to select "Asia" and press . Make the screen back to the dialog of "Time Zone", move the highlight to "Asia Time Zone", enter space. The screen prompts a time zone list box, select "China Standard Time (CST)" and carries with the Upload button.

[5] Language: Press the null, select Standard C (English)

[6] Move the high brightness light strip to Accept Above Choices, press the button to enter the next screen.

14, enter the following options:

[1] Standard Enterprise System Configuration: YES

[2] Lightweight Character Terminal Configuration: No

[3] IF you Run Large Database Products, Choose The Following: Database Services: Yes.

[4] Move the high brightness light strip to Accept Above Choices, press the button to enter the next screen.

Fifteen, enter the following information:

[1] First select the first high brightness first Hard Disk setup, press the space bar, enter the next screen.

[2] This screen shows the setting hard disk, high brightness at the first hard disk, press the space bar to select Interactive FDisk / Divvy, and other hard drive remain unchanged. [3] Select high brightness, press the key screen, will display some explanations, press the button to enter the next screen. Select high brightness and press the button to enter the next screen.

XVI, enter the following information:

[1] In the Netowrk Card, the AUTO Detect is selected, the screen prompts detected the network card type, press the Enter key to continue, or it can be temporarily unpredictable.

[2] Press the space bar in Network Address, enter the network address, subnet mask, broadcast address according to the screen prompt, and then select High Brightness Accept Above Choices to return.

[3] In Video and Graphics, IBM VGA is default.

[4] HiGH Resolution Keyboard-Mouse in Mouse (you can also follow it)

[5] The MMDF is selected in the EMAIL System.

[6] Select High Brightness Accept Above Choices and press to enter the next screen.

Sevente, enter the root password, then enter once to confirm: Select High Brightness Accept Above Choices, press the button to enter a screen.

Eighteen, choose OK, press the button to enter the next screen.

19. Choose 1 (1.Continue with hard disk initalization.), Enter.

Twenty, choose 2 (2.USE Entire Disk for UNIX), Enter.

Twenty-one, select 5 (5.activate Partition), setting the Unix partition created as an active partition, then enter the 'Q' Enter.

Twenty-two, choose 1 and enter.

Twenty-three, choose 1 (1.thorough scan (6m / min approx)) and press Enter, and then enter 'Y', 'y' according to the screen prompt, will start the scan of the hard disk bad point, waiting time is about 20 minute.

Twenty-four, press the return of the value.

Twenty-five, the size of the input switch area is in KB. This value should be 2-3 times the physical memory.

Twenty-six. Enter the size of the Boot area and press Enter the value of the value.

Twenty-seven, do you want a SEPARATE / U FileSystem? (Y / n).

Enter 'N' Enter.

Twenty-eight, do you wish to make any name 帖子 帖子 帖子 帖子?? (Y / n)

Enter 'N' Enter

Twenty-nine, the operating system installation begins, please wait. . . . The installation time is expected to be 1-2 hours, and the screen will prompt the percentage schedule for the system installation.

Thirty, after the installation is complete, restart the system according to the screen prompt.