Now there are more and more friends from the broadband Internet, but how to make full use of your broadband advantage, I will not be very clear; the author has been pondering this matter after applying for the monthly broadband, first build his own personal website, open File Server, release your own online film (including Win Media Flow Media Server and Helix Server Flow Media Server), then make a self-mail server, so that it can be said that broadband advantages have been played, I want to release online information, share my own experience with my friends, exchange ideas, etc., everything is asked, it becomes simple and fulfilling, don't have to find a large-capacity free mailbox, don't spend a lot of time upload download What you like is shared with everyone, just tell you a message, communication is starting with your heart; if it is very tempting, let's get started!
First, you must prepare for work, this is a must
First: Apply for broadband service, long width, adsl, wired, etc., you can choose according to your own preference;
Second: The work made by the author is done under Windows 2003, so I suggest you install or upgrade your operating system to Windows2003; this will save a lot of trouble during subsequent, such as you don't have to install ADSL super line pass Ah, WINDOWS2003 has a dial-up client with the PPPoE protocol, which is a dial-up connection to the broadband service, just as shown in Figure 1:
Figure 1 windows2003 is a very good server operating system, I believe that you will like her in the future;
Third: The author discussed the personal web server, so how to be a tenet, as for the application for a special line, get the external network can access the web server route created on your local machine, not in our discussion, what we have to do is By the third party's domain name, it is recommended to connect to your web server. It can also be a service. The key to this service is free. I believe everyone is more interested in this is more interest :), okay Gossip less, to the domain technology http://www.oray.net/ Register a free domain name, download its peanut client software, after installation, use the domain passport of the domain in the domain technology to log in Domain server, you will see that as shown in Figure 2: Figure 2 You will come out in your "List of List" in your "List", you can you have a list of free domain names in the domain technology application. Tell your friends, let them access the web server on the unit through the free domain name of the domain technology application, is it simple? Everyone can see my name list, there is an international domain name (www.meansgold.com) in the domain name service provider, and there is also a free domain name (Goldbuy. Vicp.net) application for domain technology. Everyone passes WWW. Meansgold.com and GoldBuy.vicp.net can access my local machine, thus accessing the web service resources I offer, there is a problem here, if you have international domain names that don't apply for domain technology, but Through your international domain name instead of the free domain name of the domain technology, you will have to inform your international domain service provider to modify your international domain, point to you Domain scientific application free domain; here, the outside world is basically opened, and next is that you provide web resource services. So I will introduce one by one, I will introduce the establishment of the web site, the FTP file server, the mail server, the Win Media streaming server, and the Helix Server streaming media server; secondly, the real personal web server is set up and managed, the most exciting moments
First: Create a personal Web site (install IIS application server)
Open "Start → Control Panel → Manage Tools → Manage your server", as shown below: Figure 3 Click Add and Remove the role, see the following Figure 4: Figure 4 Click Next, Figure 5: Figure VIN Click Application Server, click Next, the system will automatically create an IIS application server and a default web server site, which is how we manage this server site. Note: In the legend, because I have created an "Application Server", "Yes" appeared on my "configured", if you haven't created "Application Server", see it will be "No" .
Run "Appsrv.msc", open your "Application Server", select "Internet Information Service (IIS) Manager → (Your Computer Name) Local Computer → Site → Default Website", as shown in Figure 6: Figure Six or right open the "default website" attribute window, as shown in Figure 7: Configure the properties of the website in turn, here only introduce several considerations, others will be slightly, because everyone is relatively familiar with how to configure Web sites;
1. On the "Website" basic attribute, because we use a peanut shell service, there is no ip address, so we don't have to set in the IP address column, and select "all unallocated", and "advanced website" Identifier, the host header is not set, even if you have multiple sites (such as mail server, file server, etc.), don't use you to distinguish, you can access your unified domain name to access you different web services. However, only the ports are different, so in subsequent settings, port settings of various sites must be distinguished; then "Enable Logging" and set the "Properties" dialog box to set your saving log files. Path, it is best not to put it in the system partition, you can choose to choose another partition, and select the content of your log file record, Windows 2003 provides detailed logging, which can easily help you view all of you The visiting data, including GET or post, successful or not, and client address information; you can choose the specific log information to view, this can be seen in the "Advanced" column of the Log Record Properties, specifically 8: Figure 8 2. In the Performance Properties page, you can select "Broadband Limit" and "Network Connections" restrictions, usually select the default; 3. In the ISAPI Filter Properties page, as shown in Figure 9: Figure 9 After installation, the default fPEXEDLL.DLL filter, you can also add Microsoft's Urlscan Security Tool version 2.0, download address: http://download.microsoft.com/ Download / IIS50 / UTILITY / 2.1 / NT45XP / En-US / IISLOCKD.EXE to protect your site;
4. In the "Main Catalog" property page, as shown in Figure 10: Figure 10 Select the local path of your website, the system default path is shown in the figure, you can choose the path to your Web resource; select "Read", default Is not selected, then select the execution permission for the application settings to "Pure Script", open the Configuration dialog, as shown in Figure 11: Figure 11 If you want to support such a "../", etc. If you want to support such a "../", etc. The formal path file lookup method, please select the "Enable Parent Path";
5. Set your SharePoint and FrontPage Server extensions, as shown in Figure 12 If your server has not installed SharePoint and FrontPage Server extensions, to http://www.microsoft.com/downloads/details.aspx?displayLANG=zh -cn & familyid = 5cc0a845-1884-4A16-A8CB-25D2F0815FA3 download FrontPage Server Extensions 2002 and then install Front Server Extensions 2002 to find "Sasetup.msi" Microsoft resources toolkit (after installation of Windows2003 after installation "SASETUP.MSI" ) Install SharePoint, then open "Add or Remove Programs" Wizard, as shown in Figure 13: Figure 13 Open "Add / Remove Windows Components", Figure 14 Figure 14 Select "Application Server" item, click "Details ", As shown in Figure 15:" Internet Information Service (IIS) ", click" Details ", as shown in Figure 16: Figure 16 Check" FrontPage 2002 Server Extensions ", click OK to install" "" "" "" Setting the directory security, as shown in Figure 17: Figure 17. The "Edit" button of "Authentication and Access Control", set access, as shown in Figure 18: Figure 18 Select "Enable Anonymous Access" and "Integrated Windows Authentication"; Use the "IP Address and Domain Limit" in Figure 17 to limit some IP or domain names to your machine; then use the "Secure Communication" in Figure 17 Install your server certificate, pay attention to you If the server certificate is not installed, Figure 17 will be the "Installing Server Certificate", and "Edit" is invalid, and the installation of the server certificate is only summarized: First, you have to generate a server certificate, follow CA website Get server certificates, then install server certificates, and finalize the server certificate;
7. Set the extension of the web server, as shown in Figure 29: Prohibit Web service extensions are set here, ASP, ASP.NET, FrontPage Server Extensions, and the server-side include files, you are allowed, There is also a Win Media streaming media server to set it here to allow Win Media services to extension. As for other suggestions, it is not necessary to allow security considerations;
Ok, a basic personal Web site is basically built, and it will be the content of your website. This is not in our discussion, you can add your website in Figure 20 to the default document, ie website Home, this way, when others are knocked into your domain name, they see the content of your website. Figure 20
Additional information, pay more attention to Microsoft's security updates, download the timely patch, make sure your website is safe; Microsoft Security Update Website: http://www.microsoft.com/security/.
Second: Establish your own FTP file server
According to the first step three, Figure 4 and Figure 5's way of walking, only in Figure 5, "File Server" is selected, click OK, create a file server, and then configure your file server; run "FilesVR. MSC ", as shown in Figure 21: Figure 20" Share (Local) ", select" New Sharing "in the pop-up menu, as shown in Figure 21: Figure 21 Click Next, such as Figure 22: Figure 22 Enter the shared folder path, click Next, as shown in Figure 23 "Shared Name" can keep the folder name, you can also modify the name other, Then give your "Shared Folder" into some descriptions, such as what is the shared folder, etc., click Next, appear as shown in Figure 24: Figure 24 Defines shared permissions, recommend customization, Thus, you can define some rules that access your file server, select "Use Custom Sharing and Folder Permissions", click "Custom", as shown in Figure 25: Figure 25 You can add or remove user The permissions of this shared folder, my FTP server provides an anonymous user browsing and download permissions, so I only add a "Everyone" user's read permissions. If you just want to specify the user can browse and download, you are Add a user, then set the specific access permission of the user in the Security page, such as only browsing, or only read, or both browse and read, etc., as shown in Figure 26: Figure 20 Six, if you want to set more detailed permissions, you can also click on "Advanced" settings, as shown in Figure 27: Selected users join the users, click "Edit" as shown in Figure 28, you can edit it User's detailed authority: Figure 28 is not very clear, the permission is also very fine, click OK, the user's permission control is basically getting. Then click on the "Complete" button of Figure 24, which will create a shared directory for your file server. You can access the FTP shared folder on your local file by accessing the file server port you set;
After adding a shared folder, go back to Figure 20. Double-click the shared folder name you just created, and the shared folder properties of Figure 30: Figure 30 Here you only need to set up two properties, "General regular "Properties and" Publish "properties, as shown, I set up the maximum number of users who allowed access to this file server sharing folder to 1000, of course, you can set your own maximum number of users you want. Then in the "Publish Page", if your machine sets the domain and has multiple machines and you link, you can publish your file server sharing folder name in the domain, share your folder in the domain.
Now is the time when your FTP file server is published in the web server, open the application server management window shown in Figure 6, expand "FTP Site", right key "default FTP site", select "Properties" in the pop-up menu As shown in Figure 31: Figure 31 Do you have seen it different from the "default Web site" attribute, here, there is no "advanced website logo", so it should be said to be your web A branch of the server; also, we don't need to assign it IP address, set the maximum election set when the file server sharing file name is set, and then open "Security Account", as shown below: Figure 32 Recommended "Allow anonymous connection", but should be canceled "Allow anonymous connection", then use user access to the user access to the FTP file server when creating a file server sharing folder name; if the server certificate is installed, You can also use SSL encrypted form to control the network to file server access; set the message and directory style of the file server, as shown in Figure 33: Enter the corresponding information text in the corresponding text box, set the main directory ", As shown in Figure 34: Figure 34 Sets the FTP file server site directory for the shared folder directory you just created, then select" Directory List Style ", by default, MS-DOS® directory list style The year is displayed in two formats, which can be changed to the year in four-bit format. Method: Open the metabase.xml file in C: / Windows / System32 / InetSRV to find / LM / MSFTPSVC / N, where n represents your first ftp site, if only one is then n is 1, set MSDOSDIROUTPUT to True, then Join FTPDirBrowShowlongDate = "True", others see the four-bit format displayed in the four-bit format when visiting your FTP file server. As for "directory security", usually we do not do IP address restrictions, so you don't discuss it here. Third: Establish your own mail server
According to the first step three, Figure 4 and Figure 5 of the way, only in Figure 5, "Mail Server (POP3, SMTP)" is selected, click OK, so the system will automatically create a SMTP in your local computer. The virtual server and the POP3 service of this virtual mail server are configured to configure your SMTP virtual mail server;
Run P3Server.msc, as shown in Figure 35:
Figure 35
Right-click your local computer name, then select "New → Domain" in the pop-up menu, as shown in Figure 36:
Figure 36
Enter your computer domain name, such as my computer domain name meansgold.com, I will enter my domain name meansgold.com, click "OK", you will see the SMTP domain you just created in Figure 35, Right click on the domain you just created, select "New → Mailbox" in the pop-up menu, appear as shown in Figure 37:
Figure 37
Enter your mailbox name, note that you entered the local username created in Computer Management, if you don't create a local username, you will create a user in "Computer Management", if you are a domain account, To create a user in the Active Directory User and Computer, you create a user name, you enter the username you created in Figure 37, or select "Create the user to create this mailbox", then enter This user's login password, click OK, as shown in Figure 38: Figure 38
This way you successfully created the user's mailbox account and clicked OK. You can send and receive emails with software such as Outlook or Foxmail. POP3 service The default server port is 110. If you want to set it into other ports, or change the folder path to send and receive mail, you will select your local computer name in Figure 35, as "admin" in the figure. In the pop-up menu, select "Properties", as shown in Figure 39:
Figure 39
Because my local machine is a member of the domain server, I choose "Active Directory" POP3 authentication, POP3 service provides three authentication methods: Active Directory integration authentication, local Windows account authentication and encryption password file identity Verification, if your computer is not a domain member, you select "Local Windows Account Authentication", then set the POP3 port in "Server Port", and then set the local mail clip path to send and receive emails in the "Root Mail Directory", which, you Can you be very convenient to view the email directly on your email folder path? Ok, here, your mail server and your private mailbox are completed, go to the Application Server window to see your mail server settings, open as shown in Figure 6, find "local computer" "Default SMTP Virtual Server", right-click it, select "Properties" in the pop-up menu, appear as shown in Figure 4: Figure 40 Follow the configured Web site and the FTP server, set the advanced ID, set your mail server The number of connections, enabling logging, the photo is filled in, then set the access control of your virtual mail server, as shown in Figure 41: "Authentication", pop up the map forty-two conversation Box: Select "Integrated Windows Authentication", click OK, return to Figure 41, click "App", "Connect", "Relay", take the default configuration; then set the mailbox, as shown in Figure 42 As shown: Figure 42 is clear, limited mail size, session size, number of messages, dead letter catalog, etc., as for "delivery", "LDAP rout", "security", Using the default configuration, do not take it, click OK, the SMTP virtual server setting is completed, in Figure 6, expand "Default SMTP Virtual Server", click "Domain", you can see the "POP3 Service" manager created Your default domain name and you add a domain name mail server. As shown in Figure 43: Figure 43 View Domain Properties, just right click to select the domain name, select "Properties" to view, here, your mail server is basically built, tell your friends, is it Can you help him build a mailbox? You can say that oversized space is free, is it very tempting?
