I spent more than a year ago, more than six thousands of silver finally took a self, according to the configuration at the time, was not bad. CPU selection the latest Celeron 500, elite P6VAP-A motherboard, Kingmax PC133 64M memory, Quantum 15g hard drive, Zhongyu TNT2-M64 / 32M graphics card.
In order to optimize the computer, I optimize all hardware and software, update the latest drivers, overclocking the graphics card to 150/165 (core / memory), but CPU is only 75 and 83 due to the main board at 66MHz The frequency is optional, first jump to 75, the CPU is displayed as Celeron562, everything is normal; then jump 83, black screen, unable to start, ultimately on 562. But then I found that as long as I dial online, I will crash after more, I will crash. I found it because my miscellaneous built-in soft cat could not be stabilized at 37MHz PCI bus, and I have to go online almost every day. Finally, I have to jump back to the default 66MHz. To stabilize overclocking, you can only select the standard forever, and the superclocular limit of the classification is about 600MHz, and the Celeron500 is more than 7.5. I have tried the extraordinary frequency, but the foundation is not bright, but Also, I didn't burn the CPU.
Soon my computer, Intel launched a new Celeronii CPU based on the CopperMine128 kernel, using 0.18 micron technology manufacturing, support SSE technology, excellent overclocking, becoming the favorite of DiYer. And I watched my own love machine couldn't overclock, I wouldn't help but have some regrets. Not long ago, the opportunity finally came, one formerly known, he got a motherboard, but the highest can only support the CPU of Celeron500, and now I can't find this CPU in the market, so I put my Celeron500 transfer to He, it is a waste of heat, but also has 300 silver. This is a good price. I have to know that I asked JS, acquire the second-hand CPU up to 180! Solding old race, I immediately published a "computer newspaper" with Celeronii overclocking numbers in February, playing the CPU market on the same day, Celeron 800 and 850 are more than 600 yuan, and overclocking performance is not Ok, do not meet the needs of DiYer, and the lowest end of the class is 633, it is 340 yuan, and then up to 400 to 500 yuan in 667/365, more than 400 yuan. In addition, I also found that a store has two three race 566, 335 yuan, but I don't know if it is old. As soon as I consider that Caiyang 566 can be more than 850, and 633 950 is less heard, but the price is only 5 yuan, but it is not willing to buy 633, if it is not too much. It is also better than 566. However, in the electronic city, I didn't find the number of CPUs on the newspaper on the two or three circles, and I changed it, and I couldn't think that the CPU on the market is newer, and the newspapers in February will certainly have. So I bought a piece of class 633 and numbered SL4PA. I want to buy another one again? I am broken, my stalk, I don't know how I don't know how to try it again.
Go back to install the machine, just try the 5th, 6 dollars of JS when you buy your computer. Open the machine normally, display Celeron633, run a few software everything is normal, the chassis / CPU temperature is displayed 30/34 ° C; start overclocking, first jump 75MHz, start displaying as Celeron712, running several test software everything is normal, chassis / CPU temperature display For 30/38 ° C, it seems that the CPU of Intel does not have a lot of heat. Jump 83MHZ, but the boot is not light, can this CPU only be super to 75MHz? I am sorry, simply try again 100 out-of-band, when I carefully skip the jumper to 100, when pressing the power switch, the screen actually "beep" appears, Celeron950! , But one entering Windows started 缶 缶 缶 阑 俅 舳 舳 涣莶 涣莶 涣莶 舳 舳 舳 涣莶 涣莶 涣莶 涣莶 涣莶 涣莶 涣莶. 涣莶... 涣莶. Hurry and shut down, touch the fan, wow! Extra hot! Don't burn the CPU I just bought. Waiting for the cool and jump back to 66MHZ, start a try, okay, CPU is fine, fortunately! It seems that there is a play, since 100 can light, it means that the quality of the CPU is not bad, and the 83MHz is not bright. It may be because the AGP bus is 83MHz, the PCI bus is 41MHz, other equipment such as graphics, hard disk, etc. Can't be too high Run under standard frequencies, it seems to buy a good fan.
After a few days later, I went to the electronic city. I found a 25 yuan poisonous dragon fan. I didn't buy the nearly 100 yuan overclocking fan. It mainly considers two points: First, Intel's CPU itself is not very hot. Big, and I use the original 5, 6 yuan of ordinary fan overclock rate to 75MHz, and the second is that the overclocking fan is mainly for AMD's CPU and high-frequency Intel CPU, and the merchant also said that the match is not so expensive. After buying the fan, I saw that the memory has changed so powerful. It is simply a more than a year, and it is estimated that the space is not big. It is better to take the opportunity to add 128M memory. What is good! So spend 125 yuan and bought a HY-PC133 128M memory strip. Let's try CPU, apply silicone, install a new fan, and the temperature is better than the original, it seems that the fan is different. Jump 100MHz, this time, I can go to the CMOS setting interface, the temperature displayed is not high, but I can't enter Windows, it seems to use the second trick-plus voltage. Shut down, change the jumper, increase the CPU voltage, set to 1.8V, turn it on, this successfully started, enter Windows, and start the CPU only 3,4 degrees higher than the chassis, run test software such as Sisoft Sandra The 2001, 3DMark2000, etc., the chassis / CPU temperature is 35/43 ° C. Successfully, finally set Celeron633 to 950, and running at 100 MHz standard. Next, put the newly bought 128M memory strip, boot, OK, test the CPU performance with Sisoft Sandra 2001, the performance is between the poisonous dragon 800 and the Pentium three 1G, quite good, memory performance is also greatly improved. 3DMark2000 test reached 2398 under 1024x768x16bit, and I originally Celeron500 can get more than 800 points. The elite motherboard also supports memory inherent techniques. The memory can be up to 133MHz when it is 100MHz, and my three memory can be PC133. I will further dig up the potential of hardware and strive to achieve higher performance. However, this time is not smooth, but the self-test cannot be passed, but it is not a deadline to report an error. Analyze the cause, it may be a memory problem. So unlock the memory one by one, and finally discovered that the HY-PC133 64M memory I bought was could not be 133MHz. It seems that although the three memory SPD parameters can reach 133MHz, but still have to pass Actual operation can confirm. No way, if you want to memory 133MHz, you have to idle a 64M memory. This does not meet the principle of the use of the same, and finally, I decided only to 100MHz, sacrificed a little performance, and the system has 256m memory.
