Sygate allows you to use only one modem to bring machines within the entire local area network.
INTERNET. Set extremely simple, support Windows 95/98 / NT 4.0, but also support ISDN,
ASDL and Cable Modem.
Sygate features: Sygate setting is simple, the function is very powerful, because using low-level package exchange technology
Excellent performance, support almost all Internet applications and protocols: Web Browsers, Email
Readers, News Readers, WS_FTP AND CUTEFTP IN Passive FTP Mode,
ICQ, MS Chat, Reaudio (TCP Connection Mode), Netshow, IRC, DNS,
Telnet, Starcraft, Diablo, Ultima Online, Gamespy, Quake II, PING,
Traceroute DHCP Server of NT 4.0, Server MS NetMeeting
(Partially Supported).
Download & Installation: Sygate's homepage at http://www.sygate.com/, you can directly
Download the latest version. The current latest version is 3.0, supports Windows 95/98 / NT, file size
2352K, the form of executable files installed directly.
Configure TCP / IP network environment:
1. Determine the RJ45 or the coaxial cable assembly, pay attention to the interface of these two ways of network cards,
It is recommended to use the RJ45 method, but buy more HUB. If you only need two machine networking,
Can spend a few dollars to customize a special RJ45 line, so you can save the money of Hub.
The method is: a) a total of 8 lines in the double rubber line, the color order is not related, as long as the two heads 1-3 are guaranteed,
2-6 Conditioning can. Note: Part of the crystal head projection is for you, from the left 1-8 ...
If you want to use the NIC connected to the two-machine connection [such as I am a LAN user, the other network card is used to connect
Internet] PNP attribute removes [There is associated DOS tool in the driving disk of the network] to ensure Windows
The same as the interrupt and port used in DOS. C) The relevant protocols to be installed are: Microsoft network users,
Files on the Microsoft network, shared, IPX / SPX compatible protocol, NetBeui, TCP / IP.
2. Each machine is installed on the web, connect with the network cable to determine your network is through (online neighbors)
See each other).
3. Start -> Settings -> Control Panel -> Network -> Add -> Protocol -> Microsoft
-> TCP / IP, add TCP / IP protocols for each machine.
4.Sygate server (ie, dial-up machine) TCP / IP settings: IP address =
192.168.0.1, subnet shield = 255.255.255.0, gateway = no, DNS = no.
5.Sygate client (ie other machines from the local area network) TCP / IP settings: IP
Address = 192.168.0.x, subnet shield = 255.255.255.0, gateway = 192.168.0.1
(Pointing to the Sygate server), DNS = 192.168.0.1 / or your ISP DNS
address. Note: The IP address of each machine must be different, the format is 192.168.0.x, Sygate
The address of the server must be 192.168.0. 1.
6. Under the Sygate client, start-> Run -> Command -> Ping
192.168.0.1, see if you can ping.
7. Under the Sygate server, the same last step, ping other Sygate client.
If you are all ping, congratulations, TCP / IP network environments will be equipped!
installment and debugging
After downloading the Sygate installation file sg121.exe, install it on the Sygate server, other machines
No need to do anything. After installation, Sygate will start and dialog.
1. Now you don't need to do any settings, launch your dial-up network, dial-up, and determine
Sygate is successfully connected to the Internet.
2. From the Sygate client, start-> operation -> command -> ping
202.96.0.133, see if you can ping. If successful, the Sygate has been working!
3. From the Sygate client, start -> run -> command ->
Ping www.taurus.com.cn, see if you can ping, if the domain name is fails,
Try to change the DNS of the client to the DNS address provided by your ISP. If successful,
Indicates that DNS is working properly.
4. Tap!
By default, Sygate will run as a service, that is, when Windows 95
After Sygate automatically runs in the background, you can run Sygate Manager to change the settings.
Start Sygate Service Automantical Controls this feature.
Sygate settings
Under the default setting, Sygate has been working very well, there is no need for any other settings at all, this
It is the most attractive thing of Sygate, compared to, Wingate or WinRoute is more troublesome.
If you have time, you can also do something simple setting, let Sygate work better!
1.enable Dial-on-Demand, when Sygate detects to the Internet
The connection request and the dial is not established, and Sygate will automatically call the Internet. MMH, it is recommended to ban this
item.
2.Auto hang up after 180 idle seconds, indicating if you let
Dial-up network free time is more than 180 seconds, and Sygate will automatically cut off the dial-up network connection, you can set
A suitable idle interval.
3.Start Sygate Service Automantical, decide if Sygate is used as
Service is running.
4. Others, try themselves.
Setting of Internet Application
For the general Internet application, use it directly, Sygate has already been covered.
However, there is always one or two stubborn molecules, it takes special care ...
FTP: Set the FTP software (such as CUTEFTP or WS_FTP) to work in Passive mode.
Mail & News: If you use Mail & News on the Sygate server,
The Sygate client is not in a spirit, then the address of the SMTP / POP3 / News server can be
IP try again. I didn't have encountered this problem.
Starcraft & Diablo: Special support "Star Biretronics" and "Big Pineapple"! you still can
Go to the Battle Network through the LAN to play these two games! The only limit is that you can't choose the same game group (this is said to be said), but this function I have not tried it, hehe.
Reaudio: Set to use TCP connections.
ICQ: Surprisingly Sygate actually supports ICQ, I really can't think of it. You can be in Sygate
The client sent / accepted information on the client, calling others. Because now you are through the Sygate
In order to let others call you to Chat, you need to send a message to others, or let them send
Message to you, then you can Chat. ICQ on the Sygate client To use "Dynamically
Allocated port "to configure" Behind FireWall ",
Click "Close" and end the settings.
