Maximum way to install NT and Linxu simultaneously on the system Null Null
〖
Back to〗 Forward〗
$: Because NT and Linux have to write MBR, it is more troublesome when two systems are installed on the machine. The simplest method is to install 98 and then NT and then install Linux when installing Linux. The MBR is instead of installing the Linux partition. Then use fdisk to set the Linux partition to ACTIVE. After startup, you will first enter the Linux LILO option and enter the NT OS option. $: Add NT and Linux on a hard drive, I The opinion is better with NT's OsLoader, at least its selection menu can be seen, and can be Chinese. 1. Pack 98, NT 2. Pack Linux, put lilo in the first sector of this zone. 3. Use the loadlin vmlinuz root = / dev / device name or floppy disk to start the system to the Linux system. 4. Write the boot record with DD if = / dev / hdxn of = / root / linux.ldr bs = 512 count = 1. 5. Add a description of the Linux boot file in C: OOT.INI. Note that if the core is recompiled, you have to do 4, 5 steps. If Linux is installed on the hard disk 8G, this method can't, because LILO reads the number of hard drives in the BIOS, cannot be greater than 1024
