LILO and partition Q & A (2) Null Null
〖
Back to〗 Forward〗
Q: HDA1 1.5G HDA5 2.5 HDA6 3G: FAT32 HDA3 SWAP 128M HDA4 Linux Native 2.1G HDA7 Linux Native 1G HDA7 HDA4, Blue Point Was Nomal, And Could Write Lilo. HDA4 Turbo Can't Write Lilo I don't know why Turbo CAN't do this !!! a: 1. Please read the previous document carefully. In fact, because Linux initial design lacks certain advanced, there is a limit of 1023 (or 1024) cylinders, that is, If your Linux operating system is installed outside 1023 cylinder, then your lilo is very likely to install, in fact, on my computer, TurboLinux is installed within 1023 cylinders, redhat is installed at 1023 In addition to the cylindrical, LILO cannot be installed correctly even if the RedHat's / Boot area is installed within 1023 cylinders. More serious, I started from RedHat, and I can't talk to the CD. The system told me: Don't support VFAT. So your problem is nothing to do with the specific version of Linux, and their core should be different, it is entirely due to the difference in the location of your installation. 2. If two Linux operating systems are installed on a single computer, you don't need to install twice, you can guarantee that you can install it for the first time, just modify the first operating system /etc/lilo.conf , Then write to the MBR, you can't install the second LILO.Q at all, thank you again, I didn't explain that I didn't explain that my hard disk partition was as mentioned above; Linux installed several times, no matter the BluePoint installed in that partition (especially in HDA4), it could be installed normally. BluePoint in HDA7 bruises Turbo's LILO information to it, writes LILO success, but terrible is still behind, when I boot from LILO to Turbo, the Chinese characters become chaos ...? ? At that time, I thought that I installed the problem, I reinstall Turbo results, and finally I gave up Turbo installed Oracle in this partition. Finally, I think that Turbo is chaotic after starting, because his own LILO information is not successful. Reason, I don't know if it is this? ? I have also installed Turbo it is normal after HDA7! ! ... I really don't understand, I asked the teacher, he said that Turbo's Lilo has problems. Sorry to bother you again. A: Show the chaos, I think it is because of their different Chinese, BP is kernel and Hanhua, and TL is plug-in, which may not support each other. My 15G hard drive is two kinds of Linux can't install LILO, I am booted with LoadLin. The key here is to guide the kernel, the VMLinuz file, to use the / boot / vmlinuz file in the Linux primary partition after installation (the file name is finally possible, such as VMLinuz-2.2.17. About 600K, don't use that A few megabytes.
Different versions of Linux different files, if all other versions of VMLinuz performance answer is very discount, if you can't install the sound card, you can't mountWindows partition, etc. ==================== ========================================= q: I have two hard drives I want Install Win98, Winnt, Linux, one of which hard drives are installed, and another Winnt, Linux is installed. Win98 is installed I don't want to reload it. I would like to install Winnt, Linux.
A: First determine the main hard disk partition is FAT16, so NT can be installed. If you can use PQ to change. Upload NT on the second hard disk. Use PQ to divide the Linux primary partition and exchange partition on the second hard disk, start loading Linux Note that LILO must be installed on the Linux partition and have a Linux boot disk. Install the complete floppy disk, use the DD command to get the Linux partition file. Copy to the first hard disk, configure the boot.ini file. Refer to the previous post. ================================================= ==================: NT OS Loader method A: 1. Put the NTLDR in the NT installation to C: below (this assumes The original Windows 9x, requires FAT16, NT does not recognize FAT32). Then in Win 9X 2 (Win 9X DOS Mode is not working, do you have to go to C: disk, because Direct Disk Access) 2. Run the NT installation disk Winnt / b (Floppyless Operation, / X is similar) Its operation is to back up C: Boot Record into bootsect.dos, and add a boot.ini, plus two in boot.ini. Entry, then change C: Boot Record to NT (HEHE, what is this) To note that WinNT / B test can Ctrl Alt Del to do it, do not waste disk space. And be sure to put NTLDR COPY to C: Under, then say that NTLDR Not Found can't start. 3. This will be installed after NT OS Loader, then you can change Boot.ini you attrib - R -H -S is more convenient =========================================== ==================== Q: How do I look at the EXT2 partition under NT? A: There is a Dongdong called Explore2fs.exe You can get this software in the address, the specific situation readme http://uranus.it.swin.edu.au/~jn/linux/ good Luck = ============================================================================================================================================================================================================= =========
=== Q: Is there a software that is read and written on Windows? A: 1. Ext2 Tools v1.1 ext2 Tools is a set of toolkits that allow you to read Linux EXT2 file systems. 2. Ext2 Tools supports Windows 9x / NT 3. LTools 4. fsdext2 http: // www. GO.dlr.de/linux/src/.warix/ fsdext2.zip.html can write 5. Explore2fs http://uranus.it.swin.edu.au/~jn/linux/ can write ====== ============================================================================================================================================================================================================= ========= q: The following is the details I installed, please ask the high finger: hard disk: QT4.3, first divide 2.54G format into NTFS with PQMAGIC, install the W2K Chinese Professional. Then start the installation of Red Hat6.1 from the disc, divide the remaining hard drive into swap, /, and / boot, put lilo / below (also trying to install LILO, before using Win98 NT4 Linux) use). After the installation is complete, start with the floppy disk to enter Linux, execute # dd if = / dev / hda7 of = / bootsect.lnx BS = 512 count = 1 where HDA7 is my root partition and then # mcopy /bootsect.lnx A: Exit, from The hard disk is started to enter the win2000, copy the bootsect.lnx on the floppy disk to C:, then modify C: OOT.INI, plus a C: bootsect.lnx = "linux" After saving, there is a menu, all of which is LiNux NT-loader mini-howto, I used to use Win98 NT4 Linux very good, now I have no problem, I only see a cursor in the flash, I haven't moved, but I also started with the floppy disk. Entering Linux. Although it can be used in this way, the spring weather is wet, in case the start of the floppy disk is broken, it will not die, please expert guidance.俺 is a novice, can you trouble you say in detail, I believe a lot of newcomers are waiting to see it, thank you first.
A: You can install this: Install Linux LILO to your Linux Site / dev / hda7 then use fdisk to set the / dev / hda7 to Active and start the system will first enter the system first, then enter the W2K system boot program = ============================================================================================================================================================================================================= ================ q: / etc / fstab, WIN98 is vfat, NT is? / DEV / HDA5 / MNT / WINNT? DEFAULTS 0 0 对? Is Linux for NT operation is read-only? Thank you! A: DOS / 95/98 can Mount into a VFAT format, you can try with a floppy disk, use the vfat format mount to see the long text name. NTFS format partition, only mount under Linux, RO.A: / The format of the ETC / FSTAB file is: #Device mount_point fs_type mount_option fsck_option (2 digits) Your mount option is selected to be a RO test. In addition, you don't have to change fSTAB, you first in the mount ntfs partition in the shell, if there is no error , Modify the fSTAB file. =================================================================================== ================== Q: I have an empty hard drive, I want to install DOS, Windows95 and Linux, what is the best way? A: We recommend you installation Before Linux, you can first install other operating systems. This allows other operating systems to better cooperate with hardware, or avoid other systems to modify the data in the MBR. Maybe you should install it according to the steps described below. First do other operations first The system's installation process, but if other operating systems occupy all disk space, you can try to "stripped 'out part of the space," Native FDisk' is used to generate other operating systems required (space size depending on the operating system, You can decide yourself), then reinstall this operating system. After installation, you can start Linux installation. 1, first install Win98 (the first partition is a FAT system, if you want to put Winnt in the first Dividend.
