The first step is installed on a workstation installed NORTON GHOST 7.5 (including network multicast Ghostcast Server software).
Step 2, create a installation template. Installing a Windows operating system on this computer (other operating system can be adjusted), you can also install a variety of applications, and make appropriate settings and adjustments throughout the system.
In the third step, use GHOST to make a template computer's disk image file.
Step 4, install the multicast server. In the Windows system environment, find a name "Ghostcast" from the Symantec Ghost program group.
"SERVER" shortcuts. This shortcut can be the Windows version that can start the server on the ghostsrv.exe file on the hard disk.
Mr. is required to make a multicast server boot disk under the DOS environment. "Ghost boot" in the program group
Wizard "Disk Create Wizard, create a floppy disk with the DOS version multicast server program. The multicast server main program is dosghsrv.exe.
The fifth step is to make a workstation boot disk. Still run "Ghost Boot Wizard" in the program group, select "Network boot
"DISK". However, when you choose the client type (Client Type), the boot disk of the previously made server is different. Here you have to choose "Symantec
Ghost ".
Then set the IP address, subnet mask, and gateway address of the workstation machine. The latter operation is identical to the operation of the previously made the server guide disk, and it can be done with just clone.
In the sixth step, start more broadcast. Start all the workstations that need to be multicast cloned with a workstation boot disk boot to boot and ensure that it is connected to the server and then start setting.
If you execute the dosghsrv.exe file directly, you need to first in Session.
Name Enter any session name (such as clone98) at an Image (.GHO Image File) or press the "Browse" button to select the image file (such as D: /
Win98.Gho); select an option in "Disk" and "Partition" and select the appropriate disk or partition in its drop-down list; finally press Accept
Client (accepting customers). After everything is ready, click the "Send" button on the multicast server to start multicast clones.
