1, vigorously knock the Enter key
This is probably a common problem, because the Enter key is usually our completion, and finally it is about to be hit, probably a sense of victory, everyone is entering this Enter key It is always so vigorous and cheerful. I have been scrapped in this way, and I don't see the word is awsd (huh, I know the name), but the button that cannot be used is Enter.
Workaround: Solution has two, the first is to control your emotions, the second is to prepare your wallet. I chose the second, sometimes a good mood is not enough, what about you?
2, eat snacks on the keyboard, drink drinks
This habit is probably being very common. I have seen many people like this, especially in fascinating, but also used the computer desk as a dinner table. I think you want to remove your keyboard, maybe the same behavior will be reduced, you can see your keyboard is like a spurting rock, for your usual habits, keep a lot of "fossil", rice particles, Biscuits, hair, etc. are everything, no wonder people say: The keyboard in the utility room is dirty than the public toilet. At the same time, such debris may also enter your keyboard, block the circuit on your keyboard, resulting in difficulty input. The harm of the beverage is even more powerful, and it is enough to destroy your keyboard. It is your keyboard, fortunately, I am not being destroyed, I am afraid to play the word, but also sticking very badly.
Workaround: Avoid eating on the keyboard, or buy a waterproof Philips keyboard like me, then give him a sanitation every time a period of time (although this is still very dirty); if you want a pocket, It can be considered for half a year to change a keyboard (I never recommend a poor keyboard, that is, if you are a healthy problem), you should be better. I still have to buy a dinner table for your room.
3, the disc is always placed in the CD-ROM drive (still when you see VCD, you will be played or dinner)
Many people always like to put the disc in the CD, especially the CD disc, in fact, this habit is very bad. The disc is placed in the CD-ROM drive, and the optical drive will be detected every time, especially the burner, always in the continuous detection of the optical drive, and the high-speed optical drive is working, the motor and control components produce high heat. For this purpose, the company has been trying to solve it.
Although there are now many ways to control the optical drive temperature in a reasonable range, but if the light driver is working in a working state, even if the advanced technique is still unable to effectively control the generation of high temperatures. The heat not only affects the stability of the component, but also accelerates the wear of the mechanical components and the aging of the laser head. So let the light drover work, it is really not hilar, unless you want to cook your disc and the optical drive.
Workaround: Try to use the contents of the disc to the hard disk to use, such as transforming the CD to MP3, if you are a perfectionist, use the virtual drive form to manage your common CD disc; the game is trying to use Hard disk version; Most CD version of the game can be found on the Internet to convert the disc version to a hard disk version; otherwise it is also in the form of a virtual optical drive. There are many virtual optical drives on the Internet to download. If you are afraid of trouble, you can use your domestic "Oriental Optical Drive Magic 3" or "VirtualDrive7.0", the interface is simple, and there is no E-article problem, very good.
4, turn off the machine and restart now
Often someone thinks that the disc is not taken out, or there is still something that is not completed, the author is one of them, it can be said that there are people who have the same problem. Many people react quickly, you can think of it, then reach out, then reach out; more DIY good hands, always motion sensitive, shutdown, ten seconds to deal with faults, reboot; don't know how to harm to computers How big is it. First, the voltage impact of the short-term frequent pulse may damage the integrated circuit on the computer; secondly, the most hurt is the hard disk, the current hard disk is high-speed hard disk, from cutting-off power to the disc full stop, need more long time. If the disc is not stopped, turn it back, it is equivalent to recurring the hard disk in the slower state. So long, this impact will definitely make your hard drive live in western.
Solution: After the shutdown, there is something for forgetting, and let him down; be sure to complete, please wait more than one minute to turn it back, or press the hot start button on the chassis when the machine does not disconnect the power. If you can't do your way, for your health, I suggest you take a rope on your computer to use it for more than one minute.
5, start the chassis cover
When the boot box is running, you will know that DIY is often dry. It is indeed a chassis cover that is capable of making CPUs cool, but this cost is achieved by sacrificing other accessories. Because the chassis cover is opened, the chassis will lose forward, the air flow will no longer pass the memory, etc. The heat becomes an increase in heat, not single single, but also used to heat yourself, especially the burner, and the temperature will be much higher than usual.
Do not believe that you have the optical drive temperature that does not open the cover. The turning case will also bring electromagnetic radiation, noise, etc. harm, and make the accessories in the chassis easier, bring static damage, and hinder the rotation of the fan. At the same time, let other hidden dangers can be multiplied, for example, drink a film while drinking tea before the computer, a hilarious lens makes you spraying the Qing's tea in the mouth into the open chassis ...
Solution: Very simple, give you a chassis lock lock, then send the key to me. If you are afraid that overclocking is unstable, don't overclock, now the CPU is fast enough, and the mainstream CPU in the market is enough. If you use the old-cut CPU, I suggest you still change one, change one is about a few hundred yuan (Celeron D or P4, AMD is also good) Why should he be bold and electromagnetic radiation, noise? Or is there a word: Happiness is not available for money.
6, touch the screen with your hand
In fact, whether it is CRT or LCD, it can't be touched. The computer will aggregate a large amount of electrostatic charge during the use of components during use. The most typical thing is that the display is used to touch the display screen after use, and the static electrostatic discharge occurs, and electrostatic discharge may harm the display, especially the fragile LCD.
In addition, the surface of the CRT has anti-strong light, anti-static AGAS (anti-glareanti-static) coating, anti-reflection, anti-static ARAS (anti-reflectionanti-static) coating, touch with hand, will stay on top Lower print, don't believe you from the side, you can see a handprint on your screen. Do you want to help the public's uncle, and extract the fingerprint of the damage monitor "murderer"? At the same time, with your hand touch the display, it will also damage the coating of the surface of the display because of the fat on the hand.
The LCD monitor is fragile than the CRT display. It is not advisable to point your LCD display finger pointing or powerfully stamp the display. Although it is not a big problem for the CRT display, the LCD display is different, this may The protective layer causes scratches, damaging the liquid crystal molecules of the display, making the display effect big discount, so this bad habit must be corrected, after all, your LCD display is not a touch screen.
Workaround: Post a sign on your monitor, you can't use the nails to take a channel on the monitor; want to "point to Jiangshan" on your screen, go to buy a laser specified pen. Strong impacts and vibrations should be avoided, and the screens and sensitive electrical components in the LCD monitor will result in damage; the display cleaning should be purchased in a dedicated audio-visual store, then use the glasses cloth and other soft Cloth gently scrub.
7, always use the same wallpaper or screen security with still pictures
Whether it is CRT or LCD display, long-term display of the same picture, will make the aging speed of the corresponding area accelerate, long, will definitely display distortion. If you have the opportunity to look at the computer in the machine room, you will find that there is a significant picture outline above. What's more, life is colorful, why bother to use the same mouth?
Solution: Replace a topic every time, it is best not to more than half a year. When you don't have a long time, you can turn off the display. If you don't have this habit, you can set your right time in the screen saving of the display attribute, so that Windows will help you.
8, put the disc or other things on the display
The display will heat when the display is running. In order to prevent overheating, the display will inhale cold air, allow it to pass through the internal circuit and then discharge it from the top. Don't believe you now touch you on the disc, is it hot asphalt? If you always put the disc or paper on the monitor; more exaggerated is to make your cat to sleep in winter, when the monitor is a hotbed, which will accumulate heat inside the display. So color distortion, imaging problem, even bad, you will find your monitor.
Workaround: If you want the display to keep the best quality, and extend its life, hurry to wake up your cat, let it go to sleep elsewhere. And put your "pancake" to the disc bag.
9, take the computer host to the foot
If you want to kill your desktop computer, drive it to the off-road, or carry it to climb the mountain, Sudi, which will be faster; your way is too small, it is a longer time Can make a score. If you are willing to stick to it, it is estimated that the first result is to produce a hard disk, the death is a hard disk.
Workaround: Take your photo on your computer as your desktop, let you see how difficult you is, so you will not reach your feet again; otherwise you will invoice your computer. On the display, look at the amount on the invoice, you should not be indifferent. If the above method can't stop your behavior, I think you should consider buying a chair with a buckle.
10. Computers and air conditioners, TVs, etc. Household appliances use the same power outlet
This is because there will be a common power pollution phenomenon such as spikes and surges when running with a motor, which will make it possible to break your computer, so that your system does not work even damage. At the same time they are starting, will also compete with the power supply with the computer, and the consequences of the small decrease in electricity may suddenly let your system restart or shut down.
Workaround: For your computer, you are not hungry or eating "food (electricity)" is not clean, first you should use a good quality computer switch regulator power supply, such as the Great Wall and other brands. Second, for some users who are very unstable, it is recommended to purchase equipment such as UPS or stabilizing power to ensure a clean power supply for computers. There is also an optimization of the wiring and minimize the impact of various electrical appliances. 11, pick up the second hand to your computer
Just like cigarettes, cigars or tiny smokers hurt your lungs, smoke may also run your floppy drive and endanger information. Smoke may also cover the read head of the CD-ROM, the DVD driver, causing a read error. Cigarette butter is more likely to make your printer and scanner quality decline.
Workaround: To protect your system and your own best way, don't smoke. If you can't stop smoking this habit, go outside, or open the air fresher around the computer! Of course, don't use your keyboard as an ashtray.
After reading the hardware problem, let's take a look at the software problem.
12, constant replacement driver
A lot of DIY is very like to update the driver. Although the update driver is possible to improve performance and compatibility, inappropriate new versions may cause the hardware function to exceed the exception, and it is recommended not to upgrade the driver at will. Read the driven Readme file first, it is good for you. It is the best way to update the rapid hardware like the graphics card. Don't always be new. Don't use the latest version of the driver, you should use the driver suitable for your hardware situation, because each generation of drivers are the most popular on the market. The graphics chip design, the old chip should not use new drivers, let alone use the test version driver, the test version driver will first allow the editor of the website to test their system.
Workaround: Going to a professional website to see the new driver introduction, I think the most insurance method is: the maximum number of drivers in the graphics card is launched by the chip; the motherboard has been driven by the chipset; the sound card and so on. Use the driver after a year; don't use it backwards (unless you have a problem with the previous driver).
13, install a lot of beta or share version
Chasing a new family always likes to use the latest software on their own machine, like the driver, the update program is possible to improve performance, increase functionality, and compatibility, but inappropriate new versions may cause an exception of the system. In particular, the test version of the program is more harmful. Since there is no official version, it will show that the software still has a lot of uncertain bugs. These bugs are like a timed bomb, and they may explode in your system. Damage your system.
Shared version of the software has some time (or number of times) will fail, if your system changes a certain function through shared version software, the shared version software cannot be run because of failure, then your system can't return. To the state you want; there is also the information or documentation that uses a shared version of the software, because the shared version is invalid, and cannot be opened. So when installing a shared version, you should pay attention to the number or time of the shared version to use, so as not to restore the system and lose information.
Workaround: If you don't have to use the new version to solve the problem, try to use the latest official version of the software, and the test work is left to the experts to complete it. Register your shared version as much as possible, otherwise pay attention to the restrictions of shared version software, so as not to lose important files or harm the system.
14. Conduct abnormal restarts in the system operation
At the system run, abnormal restarts (including restart keys, power keys, and CTRL Alt Del on the chassis may make the system lose system files, storage errors, and loss settings. Original Windows is a file that provides disk scan tools, which can correct partial error, but because the scan requires a more time, many people will interrupt his work, often there is such a situation, and it is possible to make the data on the hard disk The chances and number of times have increased, making the entire system crash. Workaround: Try to use a relatively stable system, it is recommended that the CPU frequency is 256M and within 750MHz, and the user uses WinXP system. Other Win2000 can be considered, and it is best to convert the hard drive to NTFS format, which is better than FAT32 The format is safer and it is not easy to make mistakes. There are also users of FAT32 and FAT16, it is best to let the disk scan tool complete its work. Of course, the best way is to find out the cause of the crash and put an end to the emergence of such phenomena.
15, no scanning and finishing hard drive
I often see that many people's hard drives are full of mistakes and fragments, I always feel very bad. In fact, those things will not only increase your system's error, but also make your system becomes very slow, even can't run. In fact, it is very good to understand such a disadvantage, just like your room, there is still a wrapped together, or even damaged, of course, the efficiency of things is very low, it is hidden, but also unwave first; I can't find it, because they are bad.
Workaround: I usually remember to clean your hard drive. Every time you have cleared your hard drive, and organize. If it is a user who adds delete operation, it should be sorted once a month, and ordinary users can organize once three months. Windows self-contained disk finishing tools are very efficient, you can use VopTXP, Norton and other tools to increase speed.
16. Virtual memory does not specify
The virtual memory paying for the names of the hard disk to simulate memory with the hard disk to ensure that the memory requests of the system memory are guaranteed to run. General Windows defaults by Windows yourself to manage virtual memory size, there are two disadvantages: first each request value is inconsistent, so the system will play a place on the hard disk partition, store temporary files, and have not timely Delete, makes the fragment on the hard disk increase, which affects the efficiency of the system. Second, general Windows is the default disk that specifies the storage of the hard disk to be virtual memory, but because many users always put the program in the same partition, the space is getting smaller and smaller, that is, The space used in the virtual memory is reduced, less than a certain degree, will not perform large software, or even enter the system.
Workaround: You should manually specify the location and size of the virtual memory. In principle, the specified system virtual memory is 512M or more (the least smaller and maximum space, to ensure that Windows will not change the position), the location is excessive The space is fine.
17. Do not uninstall, but directly delete folders
Many software installations add registration information and files below the registry and System folder. If you do not uninstall, the information and files in the registry and the System folder will always remain in the registry. Their existence will make your system become very large, the efficiency is getting lower, exceeding your endurance, you have to reload your system.
Solution: When deleting a program, you should go to the delete adding program in the control panel to execute (you can make a shortcut to get more convenient on the desktop), or find the deletion shortcut in the program in the start menu bar, Remove the program by it. There is also the use of green-free installed software as much as possible. 18, software loaded or installing too many equivalent functions
The same functionality will inevitably exercise the same functionality, causing disputes. Software I think that the same function should be hiented, choose software that best suits you usabread. Special anti-virus software should choose one, rather than loading many system resources in the system background, the loading is too much to generate too much consumption, and the disadvantage of the software conflict, and when the virus is found, it may also occur because of the "dispute Kill "virus causes trouble of the system crash; let's work on multiple pops, it is also a trouble.
Workaround: From one and finals ", don't get too much, choose a software suitable for you to use habits, others can uninstall it; correctly treat anti-virus software, you should choose a virus library update fast anti-virus software, And update your virus library to the latest virus library instead of installing multiple anti-virus software.
People have not finished, knowing the error, change is a good comrade. We have to correct some of the usual poor utilitarian habits. After all, the computer is our good partner, don't hurt our friends because some wrong habits!
