Exchange5.5 Common Questions and Answers

Exchange5.5 FAQ TYPE: Exchange and Mail Server Time: 2004-11-29Author: Microsoft Taiwan URL: N / AHIT: 7 DayHit: 1 WeekHit: 1 Exchange5.5 FAQ Q01: Upgrade NT Server from 3.51 to 4.0 After the version, how does the original installed Exchange IMC service failure, how should I solve? A: If Exchange Server 4.0 and IMC are installed on the NT Server 3.51 Chinese version, when the NT Server Upgrade to version 4.0, an error message will appear when the IMC starts: "Unable to configure program input on dynamic linkage library uiencodeeuc_jis @ 16 Point Gapi32.dll. " This is because the WMS covers some Exchange files, and the solution is 2: 1. Reinstall Exchange Server 4.0, and select "Reinstall", after being installed, reset the IMC. Note: Before reinstalling Exchange Server4.0, be sure to check if the IMC and the IMC and MTA have no letters. Make sure that the column is empty, you can perform Reinstall. 2. Microsoft has made corrections for this issue The program, the program is named EX4NT4.EXE, and after this correction is executed, the IMC service can also be resolved. Q02: When the English mail system (such as: eudora) is transmitted to Exchange Server, the Chinese word seen when the Exchange Client is displayed in the Exchange Client display to garbled? A: In order to make Exchange Server 4.0's Internet Mail Connector Support for the Chinese fonts transmitted by these English, must be installed on Exchange Server 4.0, the steps are as follows: Put the Chinese version of the Exchange Client CD into the disc machine, turn on the "Command Tips", switch to the disc Machine disk code executes the following instructions to update the internal code page and login file content: CD / CHT / UTIL / IMC Chteximc Q03: Through Exchange Sever 4.0 Chinese version, unable to receive letters from Japan? A: in Exchange Server 4.0 Chinese version After installing the Internet Mail Connector, you should receive a letter from the Internet, but if the associated code page is not installed on the Server, letters from other countries will suffer a failure of letters. In order to receive the letter to Japan, you can solve this problem on the NT machine equipped with an IMC.

How to install Japanese code Page: 1.copy c_932.nls to c: / winnt / system32 2.start regedt32.exe 3.add // hkey_local_machine / system / ccs / control / nls / codePage Value Name: 932 Data Type: Reg_sz string : c_932.nls 4.add // HKEY_LOCAL_MACHINE / SYSTEM / CCS / Control / NLS / LANGUAGE VALUE NAME: 0411 DATA TYPE: REG_SZ STRING: L_INTL.NLS Q04: How to manually increase Code Page? A: In NT 3.51, in order to support the Exchange Client of a variety of languages, it is necessary to manually add top code (Microsoft does not recommend customers to install the English version of Exchange Client on the Chinese version of the job system). So this document is for the English version of the operation system. Microsoft provides a set of "NLS Configuration Tool" automatically sets the Exchange Server support multi-language system, users can get from Exchange 4.0 Resource Kit or Microsoft Tech Network Compact Disk. In order to enable multiple different language clients to log in to Exchange Server, the code page must be installed on Exchange Server, otherwise the Exchange Client may encounter the following error when logging in: "The Microsoft Exchange Server Computer Is Not Configured to Suppute . your codepage, and can not logon to the Exchange Server "Code Page manual installation steps are as follows: 1.Copy the codepage file to the% systemroot% / system32 directory as the file name .NLS, eg C_950 .NLS 2. Start Regedt32.exe 3. Add a value under the registry key: // HKey_Local_Machine / System / CurrentControlSet / Control / Nls / CodePage The value is: value Name: the ANSI Codepage ID Data Type: REG_SZ String: the file name of this codepage file 4. Add a value under the registry key: // Hkey_Local_Machine / System / CurrentControlSet / Control / Nls / Language The value is: value name: the Windows Locale ID Data Type: REG_SZ String: l_intl.nls Far East Double Group Homework System Code Page Page CODEPAGE, ANSI CODEPAGE ID CODEPAGE NLS Files LCID Japanese, 932, C_932.NLS, 0411 Korean, 949, C_949.NLS, 0412 Chinese (PRC), 936, C_936.NLS, 0804 CHINESE (Ta IWAN), 950, C_950.NLS, 0404 Q0

5: When sending a letter to the Internet, some recipients have a garbled to receive garbled and contain an attachment illustration of Winmail.dat? A: Winmail.dat is used to process RTF in the letter, attachments And Postion Inform, if the recipient's mail host cannot interpret the Winmail.dat file, there will be this phenomenon. Solve the method has three: IMC / File / Properties / Internet mail Tab / Interoperability from Exchange Server administration ... button / "send Microsoft Exchange Rich Text Formatting" is selected as "never", and all letters sent to the Internet do not use the RTF format. If the party is a "Custom Recipient", you should pay attention to Advanced Tab. Set, do not check "Allow Rich Text In Messages" If the recipient exists in a personal address book, from the user's terms, in the "SMTP-Address" Tab, do not check "to send it in Microsoft Exchange RTF format. This recipient ". Q06: Can I use DHCP Server to set IMC? A: Not recommended, because the IM IP address must be set in DNS or Host file, so that other SMTP HOSTS can pass letters To IMC, if the IP address period changes, then the DNS or HOST file is also changed. In order to avoid trouble, it is best to set a static IP. If you must use DHCP, then the lease should be set to permanently valid. . Q07: When I transfer the email, I have always received "no route to intended recipient". What does this mean? A: This is caused by the incorrect IMC's Address Space setting. If you want all SMTP Mail, you can pass this IMC go out, you should be in the iMC's Address Space Tab, new internet ..., set Type to SMTP, address is *, Cost is 1. Q08: Client Transfer Internet Transport in the message in EXCHANGE SERVER 4.0 to receive the Internet? A: The following steps are you After installing Exchange Server 4.0, modifications to Internet Mail Connector (IMC) can solve the problem of Chinese garbled, which also records "Installation must read" in Exchange Server 4.0 packaging: Internet Mail Connector is correctly used with this version, we must update its word page usage. Its method is to update the following items of Exchange Server, performing Internet Mail Connector: /exchsrvr/connect/msexcimc/bin/msexcimc.exe /exchsrvr/connect/trn/chsxgb.tr/chtsrvr/connect/trn/chtbig5.trn Steps: please Stop Microsoft Exchange Internet Mail Connector service. Turn on the command window and change to the CD-ROM disk containing the Exchange 4.0 Client CD.

Execute the following instructions to update the binary file: COPY /UPDATE//msexcimc.exe / connection / msexcimc / bin here: = alpha, i386, mips or ppc = Exchange Server directory The disk machine code and path (such as C: / ExchsRVR) perform the following instructions to update TRN files: Copy /update/ /*.trn / connection / TRN Perform the following instructions to update this login item: / update / / regini msexcimc.ini Perform the following instructions to update the internal code page and login: CD / CHT / UTIL / IMC ChTeximc, please change the directory to / CHT / UTIL / IMC, then execute the ChTeximc instruction to perform Chteximc. After doing all the revisions, please change the Characterset Translation in the Internet Mail setting page in the IMC content page to Chinese (Traditional). Start Microsoft Exchange Internet Mail Connector service. After doing the above modified Chinese email, it is no longer garbled, but if the other party uses the English mail system, receive Chinese email sent by Chinese Exchange Client, the mail main part If there is Chinese may not Normally, this is because Exchange will set the hearting of the MIME specification to BIG5, and some English mail systems do not support multiple languages, and do not recognize the language code of BIG5. If the problem with Chinese garbled is still existed after being corrected, check the following login items, determine that all login values ​​are the same as if necessary in the following, if necessary.

/ HKEY_LOACL_MACHINE / software / classes / MIME / Database / Charset / Big5 "Codepage = REG_DWORD 0x3b6" / HKEY_LOACL_MACHINE / software / classes / MIME / Database / Charset / GB2312 "Codepage = REG_DWORD 0x3a8" / HKEY_LOACL_MACHINE / software / classes / MIME / Database / CodePage / 936 "BodyCharset = REG_SZ GB2312" / HKEY_LOACL_MACHINE / software / classes / MIME / Database / CodePage / 950 "BodyCharset = REG_SZ Big5" / HKEY_LOACL_MACHINE / software / classes / MIME / Database / Charset / x-big5 Empty / HKEY_LOACL_MACHINE / software / classes / MIME / Database / Charset / x-gb Empty / HKEY_LOACL_MACHINE / system / CurrentControlSet / Services / MSExchangeIMC / Parameters "ISO-8859-1 = REG_DWORD 1" Q09: how do I set a particular Internet user rejection letter sent? A: Exchange 5.5 support this feature prevents the user to specify a particular SMTP address of destination, set as follows: perform REGEDT32.EXE HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Services / MSExchangeIMC / Parameters Use the Edit / Add value menu on the PC in IMS Option and add the following: value name: Turfdir Data Type: REG_SZ C: / Exchsr / ImcData / Turfdir (Where Trufed Messages Will Be Placed) User Edit / Add Val ue again and add the following: Value Name: TurfTable Data Type: REG_MULTI_SZ user@SMTP.address user2@SMTP.address Add the users whos inbound messages will not be delivered end regedt32.exe program, restart IMS, so letters Sent. When you consistent with the list in Truftable, the letters will be placed in the Turfdir directory, and at Even log will see the following message: '4Pagb6z7' is the message That Will Be Placed in the Turfdir Q10: How to Exchange 5.5 Setting Internet Mail Routing Limit? A: Exchange 5.5 SP1 provides a new Internet mail service feature --- provides a tool for administrators, specifying a mail letter from a specific mail user in Exchange Server in Exchange Server. Set Internet Mail Restrictions can be set by Exchange Management:

We must first install Exchange Server 5.5 Server Pack 1 (or greater). Open the properties on the Exchange Server Internet Mail Service and select the 'Routing' page. After SP1 installation, this page will have an additional button called . Click Routing Restrictions To Bring Up A Dialog Box with Additional Restrictions. Q11: Telnet to IMC Connection 25 Test IMC Communication A: Before starting the Telnet work phase, first find the full SMTP address of Microsoft Exchange users ( Similar to user@site.domain.com) and the IP address of the IMC Microsoft Exchange Server (similar to 125.125.0.4). Note: If you want to use this document Telnet to other hosts, you only need to replace the IMC IP location with the host's IP address, and replace the Microsoft Exchange SMTP address to become the effective address you want to link the host. can. Confirm that IMC has been started through the [Service] small rule in [Console]. It is also important to note that some TelNet applications require you to open the native response (Echo) to view the instructions being entered. Confirm that the communication between the host and IMC is normal in accordance with the following steps (Note: After the input is completed, press Key): Start the Telnet work phase using the following instructions: Telnet 125.125.0.4 25 (Replace the above IP Address) If you work properly, you can see the following from IMC replies: 220 site.comPany.com Microsoft Exchange Internet Mail Connector 4.0.xxx.xx where xxx.xx is 837.3 in RTM, and 838.14 in SP1 is 838.14. Type the following instructions and start communicating: Helo test.comPany.com You will see the following response: 250 ok Type the following instructions to notify the IMC mail message source: mail from: You will Get the following response: 250 ok - mail from Type the following instructions to notify the IMC mail message destination site (using a valid Microsoft Exchange Recipient SMTP location). RCPT TO: You will see the following response: 250 ok - Recipient Type the following instructions to notify IMC ready to transfer information: Data you will see the following Response: 354 Send Data. End with crlf.crlf Type the following instructions to join the topic: Subject: Test Message then press ENTER. This instruction does not respond.

Note: Two ENTER instructions comply with RFC 822 rules, that is, the 822 instruction must be behind a column. Type the following instructions to join the email: this is a test message You cannot see the response of this directive. Enter the English period in the next gap, then press Enter. You will see the following response: 250 ok Type the following instructions to cut loop: Quit you will see the following response: 221 Closing Connection After performing any of the above instructions, if you receive the "500 Command Not Recognized" error message, Because the syntax errors or instructions are invalid, IMC cannot identify what you type. Log in to step 4 above, the Microsoft Exchange user-end mailbox of the mail recipient. If you have your test mail message in the mailbox, it means that the transfer IMC communication is working properly. If the application event records the error message, or when there is a problem when the mail message is received, check the communication setting or link to the host. Q12: How to limit some User can't leave SMTP Mail A: In "Internet mail service" in the Exchange Administrator management, please select "Delivery Restrictions" in Reject Messages from selecting MODIFY, then you want to limit Mailbox added, restart IMS Service Q13: IMS Message Size Problem A: Internet Mail encoding method is to convert 8bit Byte into 6bit Byte. So after transition, Message will be greater than the original. Circulation will grow 20% of the size, because Mail Archived will be encoded, so the letters will change than the original Q14: Open the IMC Connector "Extens 'SMTP' Could" A: Please refer to the following steps to resolve the problem to find the architecture Number Find file imcadmin.dll installed in the archive general tube Find IMCADMIN.DLL Press iMCADMIN.DLL Right to right, select the content to send the version of the version to Exchange Administrator Program Raw Mode, (Please be careful, Inadvertently, an error will cause serious loss), please select File -> Raw Properties in Attribute List, choose File Version, And The Click Editor. Click File Version And then Click OK. Please change build number to the build number as you can see you in the archive general management: damaged mail triggers Dr. Watson error message in Store.exe? A: When the system tries from imcdata / in When you transfer damaged mail to information storage, the following DR. Watson error message will occur: Application is an error, the system has generated the application record file.