Transfer from the computer report 1.Epson spraying cartridge ink ink, the process of disconnection, the EPSON printer is used in use because there is nothing in ink improper or longer, and there is no longer use of the disconnection. Most people mistakenly thought it was a plug. . At this time, it will really lead to blocked, or to send repairs, white flowers. In fact, the way to deal with is simple, first of all, what is the disconnection, what is a plug. When doing nozzles, the lines are not continuous (there is a disconnection), and the printhead cleaning should generally be made. After cleaning a few times, if the disconnection is always in the same part without changing, it is generally blocked, the blocked nozzle is the nozzle at the disconnection; if it is cleaned, the position of the disconnection is not fixed, It can be judged that it is not a plug, but there is air in the pore, and the ink supply is discontinuous, resulting in a disconnection. The solution is: First of all, it is judged that after each cleaning, the number of broken lines is getting more and more. For example, the first conclusion is that the ink of this color is finished, and the ink cartridge is removed to confirm the problem after adding. If it is just added to the ink, the discharging should be, the conclusion should be exhausted, the air ink mouth has air, and the ink is entered into the hole, and the disconnection occurs. At this time, remove the ink cartridge, bounce or smash it, and leave the ink mouth down for ten minutes and put it back into the printer and make nozzle cleaning. It should be noted that the interval between each nozzle cleaning is slightly longer (half an hour), so that the ink has a natural settlement process, and continuous nozzle cleaning effect is not good. 2. The process of blocking the plug in the ink after ink ink, how to judge the plug and disconnection. Most people will misunderstand the broken line, in fact, if not for a few months, or take a long time, generally do not block, the ink drying at the nozzle is generally blocked. . It is common that because some reason produces a disconnection, the user does not know how to properly, and the air in the well is the most prone to plug. Continuous nozzle cleaning after plugging is no, air waste fee. The simple and effective way to prove in practice is to move the printhead to the position of the ink cartridge (usually pressing the dried paper button for a second), so extracting it on the normal parking of the nozzle with distilled water or clear water. Let the print head to reset, shut down. On the second day, turn it on, clean the printhead, and do nozzle examination. The plug is not very serious, and it is generally solved. If you still can't solve the problem, you have to send the maintenance center or clean it yourself. 3. CaNon, HP, Lexmark ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Ink holes), the hole is used to fill the ink during production, and it is used to hold the inner and outer air pressure balance in the ink cartridge. There are several reasons that cause the disconnection or blockage. It is usually used for long-term intake cartridges for a long time. The nozzle is easily clogged in a state in which no ink is ink; the additional ink is improper, such as internal and external pressure adjustment Improper, it can also cause the disconnection. The method of processing is to find a small glass (or other plane object) drop a little water, immerse the cartridge nozzle in water for two to ten hours (depending on the degree of chase, not to wet the contact), then use the facial tissue to wipe it The nozzle can smooth out ink. If only slight exudation is slightly, it can be blown into the ink cartridge from the vent hole to see that the ink flows from the nozzle. As long as the nozzle or nozzle line is not damaged, this method can solve the problem of most of the ink cartridges.
