How to drive Lenovo D-Link DFE-530TX under Linux (also called D-Link DFE-530TX REV B) 2001-05-18 18:22 Publisher: Zheng Liang reading: 435 How to drive Lenovo D- under Linux LINK DFE-530TX (also called D-Link DFE-530TX REV B) NIC D-LINK Company's network card is popular in Mid-range network card, its DFE-530TX Rev A under newer Linux (such as red flag Linux 2.0 and Red Hat Linux 6.1 or more) can be driven, but its second edition network card: D-Link DFE-530TX REV B network card (with network wake-up function), is currently most Linux (except for Red Hat Linux 7.1), unable to automatically identify and drive of. I have been explored, I finally found the following method, write it out for your reference: First at http://www.legend-neetworks.com.cn/downfile/linux530_321.tar or http: /t /.. 或者 或者 5 .nsf / 04b7a76025925523 / EFCE4E0F97F77F8A482569A000241423 / $ file / linux530_321.ta download driver. Then copy the file to the floppy disk, run under Linux Super User Permissions: Mount -t MSDOS / DEV / FD0 / MNT / FLOPPY CD / ROOT MKDIR TEMP CD TEMP CP /MNT / TEMPPY/*.* / ROOT / TEMP TAR XVF Linux5 ~ 1.tar make all, build key module files VIA-RHINE.O, modify the rc.local under /etc/rc.d, add two lines below: Insmod / ROOT/Temp/VIA-RHINE.O Ifconfig eth0 Up 10.4.4.29 Netmask 255.0.0.0 Note: Eth0 is the network device name, 10.4.29 is IP, 255.0.0.0 is a mask, which is modified according to specific conditions. Special attention: You can run what NetConf, LinuxConf, Control-Panel, no need to modify /etc/conf.modules. Since the network card is started after the system startup is completed, the NIC will not be able to start the NIC launch (such as Eth0 ... OK) when startup. The debug computer is NEC PowerMate LX PII / 400 and HP Vectra VL 5/90. In Red Hat Linux 6.2, 7.0, Red Flag Linux2.0 Server Retail, Download, and Red Flag Linux 2.0, 2.4 Desktop version of the debug pass. Source: [Publisher] Zhoun [Published] 2001-05-23 9:07 [Comment] Use 2.4 kernel, select VIA-RHINE network card support.
